The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Samsung 470 in a X120e AS-SSD results seem low???

    Discussion in 'Lenovo' started by Bacstar, Jun 9, 2011.

  1. Bacstar

    Bacstar Newbie

    Reputations:
    0
    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    5
    Someone wanted to know my results in AS-SSD for a Samsung 470 256GB in a X120e. I did check in BIOS and Disks are set to ACHI. Results seem a bit slow:

    Samsung 470 Series
    AXM0
    Amd_Sata
    1228800 K - OK
    238.47GB

    SEQ: Read 128.53 MB/s Write: 123.49 MB/s
    4K: Read 9.52 MB/s Write: 16.64 MB/s
    4K-64thrd: Read 64.30 MB/s Write 51.27 MB/s
    Acc.Time: Read 0.246 ms Write 0.203 ms
    Score: Read 88 Write: 80
    Total: 216

    I used the Lenovo Recovery Disk to do my install which I read was SSD aware, but here are my partitions with offsets:

    Partition #0 Disk #0
    Size: 992.5 KB (1,016,320 bytes)
    Partition Offset: 32,256 bytes

    Partition #1, Disk #0
    Size: 1.17 GB (1,257,242,624 bytes)
    Partition Offset: 1,048,576 bytes

    Partition #2, Disk #0
    Size: 237.30 GB (254,799,773,696 bytes)
    Partition Offset: 1,258,291,200 bytes

    Partition #3, Disk #0
    Size: 1.34 MB (1,400,832 bytes)
    Partition Offset: 256,058,064,896 bytes

    I'm I aligned correctly? Everything excpt Partition #0 seems right. So, I'm kinda wondering what's wrong.
     
    Bacstar, Jun 9, 2011
    #1