The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    T400 PC Card (PCMCIA) slot is tight

    Discussion in 'Lenovo' started by mikec, Oct 16, 2008.

  1. mikec

    mikec Notebook Evangelist

    Reputations:
    28
    Messages:
    575
    Likes Received:
    0
    Trophy Points:
    30
    The PC Card (Cardbus/PCMCIA) slot is is very tight. More specifically, the seating of the card (the last centimeter of insertion) can be difficult.

    Card do not seat easily. You have to force it in there. If you insert and eject a few dozen times, it gets better. Be careful you have the PC Card facing upward/the correct direction, or you can break the slot.

    Bad design by Lenovo. The ExpressCard slot works like butter.
     
    mikec, Oct 16, 2008
    #1