The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    T60 screen replacement xga to sxga

    Discussion in 'Lenovo' started by Wakka2U, Jul 22, 2009.

  1. Wakka2U

    Wakka2U Notebook Enthusiast

    Reputations:
    0
    Messages:
    28
    Likes Received:
    0
    Trophy Points:
    5
    hi, i cracked my screen and was planning to repair it myself. I checked out a few part specs but couldn't find any issues with replacing my cracked 14.1 inch XGA with a SXGA screen. I am assuming that the screen video cable and inverter will work on both an XGA and SXGA screen :confused: This was not the case with the T40 series from what i can tell, it needed a specific cable and inverter. Could someone confirm this off the top of their heads?? ... many thanks in advance.
     
    Wakka2U, Jul 22, 2009
    #1
  2. ortegaluis

    ortegaluis Notebook Consultant

    Reputations:
    68
    Messages:
    133
    Likes Received:
    0
    Trophy Points:
    30
    I believe you are referring to an SXGA+ replacement LCD.

    Anyway, back to the question at hand.....Yes, the LCD video cable and inverter board will work with either a XGA or SXGA+ replacement LCD. Click for reference. The same FRU part numbers are used for the XGA and SXGA+ LCD video cable and inverter board.
     
    ortegaluis, Jul 22, 2009
    #2
  3. Wakka2U

    Wakka2U Notebook Enthusiast

    Reputations:
    0
    Messages:
    28
    Likes Received:
    0
    Trophy Points:
    5
    i should have looked there myself ... many thanks in the helpful info! :D
     
    Wakka2U, Jul 22, 2009
    #3