I have an 08/08 system board in a T61 that has died, no lights or power and the 7A main fuse was taken out. I suspect a DC in power MOSFET failure but repairer reckons more to it.
My first thoughts are to part it out on ebay to help towards an SSD for my T420 but having two laptops is a boon as I live in two places and avoid carrying the lappy for various reasons.
I fitted a T9300 and 8GB of memory, I have most of the accessories, docking, various batteries and ultrabay drives so I would prefer to keep it. It is still a capable machine for me.
So my question is, which system board with the Intel graphics will fit and be closest for peripherals/sockets/readers etc?
This is the parts lookup from the poorly machine:
Mfg P/N FRU P/N Description Serviceable
39T0494 39T0495 ADAPTR Adonis MDC-1.5 Yes
39T2733 39T2685 CDROM UBSS COMBO PC Yes
39T7209 0000000 - Yes
41R0594 40Y8403 MODULE 1GB PC2 5300NP Yes
41U5905 42W7655 CDPOP CPU Duo T7300 Yes
41V9478 44M4360 CARTON LABEL, 802.11B/G (INTEL, A/B/G):L No
41V9547 41V9942 COVER BsCvr14 1956WW Yes
41V9757 41V9756 COVER HDD Rubber Yes
41W1156 39T0497 ADAPTR Callisto BDC-2 Yes
41W1343 41W1499 CDPOP USB Sub Card Yes
41W4528 0000000 - Yes
41W6442 42W2609 FAN Cover HDD ASM Yes
42T0328 42T0329 PANEL FRU 15.4WSXGA+ Yes
42T0874 42T0875 ADAPTR FRU Kedron_ABG Yes
42T1014 42T1431 HRD DSK DR TRYS B80 WD Yes
42T1430 42T1431 DRIVEH TryS B80 WD Yes
42T3201 42T3233 KEYBD KBD ALPS UK Yes
42T5120 - - Yes
42V8526 46V0204 DISKCD SP1VB32RDVD US Yes
42V8631 - - Yes
42W2023 - - Yes
42W2143 44M4361 NOT AVAILABLE No
42W2739 - - Yes
42W3007 - - Yes
42W3419 44C3928 CDPOP P GS. w/AMT15 Yes
42W3918 42W3704 COVER BSCv ASM6457TW Yes
42X3562 - - Yes
42X3996 42X4641 PANEL FRU 15.4WSXGA+ Yes
42X4400 - - Yes
42X4525 - - Yes
44C3927 44C3928 SYSTMBRD ASSEMBLY FRU Yes
44C4142 44W4800 IDATAPLEX 2.5 INCH PAPOOSE BACKPLANE CAR No
45R6131 - - Yes
91P8421 - - Yes
91P8642 - - Yes
92P1107 92P1108 ADAPTR LiteON90W20V3p Yes
92P1142 42T4777 BATRYO Sony 6cell Yes
93P8979 - - Yes
It has Firewire, 3xUSB, PCMCIA slot (i am happy to lose that if needs be), SD card reader and LAN/MODEM.
I do not use intensive graphics so am happy to move to the clunky Intel graphics as I know I would be betting against the odds to buy an Nvidia board.
My time to swap boards is free so its just the cost of a board to me. Tell me what you think please.
Ian
-
Thors.Hammer Notebook Enthusiast
You are probably better off parting it out and getting another T420.
-
Given that you're utilizing a Penryn CPU, a native Penryn board would be your best bet, and that is 42W7875.
That's not going to be an easy find, so you can get a Merom board 42W7651 and apply Middleton's BIOS to eliminate the warning.
I'm sure that there are other FRUs applicable, but these two are the ones listed in the HMM.
Good luck. -
Thanks so far. -
Ah! A search on ebay with the words "intel graphics" or "nvidia graphics" shows that the planar 42W7875 has a very different looking GPU to the one installed on my machine and on other images that I saw for "t61 motherboard nvidia graphics".
I may be in luck. -
-
Just lost a wordy reply I was typing as my desktop ATX supply is about to go out in sympathy with the dead T61! I looked up images of "t61 mobo nvidia" and "t61 intel mobo GPU". I am in luck it seems. 42W7875 is Intel GPU and going for cheap, allegedly in working order!
T61 6457-4UG, advice on FRU/MPN for an Intel graphics system board to replace a dead Nvidia graphics board please.
Discussion in 'Lenovo' started by Bert Kwok, Jun 14, 2013.