The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    T61p Battery Guage stuck at 99%

    Discussion in 'Lenovo' started by Aeternalis, Sep 30, 2007.

  1. Aeternalis

    Aeternalis Notebook Enthusiast

    Reputations:
    0
    Messages:
    25
    Likes Received:
    0
    Trophy Points:
    5
    Hi,

    I run my laptop off of AC power and do not use the battery at all, however yesterday inexplicably the batter guage went from the usual 100% to 99% and has been stuck at that level ever since. Has this ever happened to anyone before? Is this a glitch or do I need to optimize my battery?

    Thanks!
     
  2. Wrath

    Wrath Notebook Consultant

    Reputations:
    1
    Messages:
    123
    Likes Received:
    0
    Trophy Points:
    30
    Try reseting the battery under the power manager.
     
  3. Aeternalis

    Aeternalis Notebook Enthusiast

    Reputations:
    0
    Messages:
    25
    Likes Received:
    0
    Trophy Points:
    5
    I looked but there is no reset setting in any of the power manager tabs.
     
  4. Aeternalis

    Aeternalis Notebook Enthusiast

    Reputations:
    0
    Messages:
    25
    Likes Received:
    0
    Trophy Points:
    5
    Is this the norm then? I really hope you are right! :)
     
  5. Rorschach

    Rorschach Notebook Virtuoso NBR Reviewer

    Reputations:
    1,131
    Messages:
    3,552
    Likes Received:
    17
    Trophy Points:
    106
    It only does that under certain conditions, look under lenovo power manager, there is a setting for when it will charge back to full.
     
  6. LaptopGuru

    LaptopGuru Notebook Evangelist

    Reputations:
    40
    Messages:
    520
    Likes Received:
    0
    Trophy Points:
    30
    What does it say under "Battery Details" on the Battery Information tab in the power manager (accessible by left clicking on the battery bar in the system tray and picking "Launch Power Manager...")?

    Guessing status says "No Activity" instead of "Charging". Like someone else had mentioned, topping off the battery is somewhat counterproductive, and it's better for the battery to not do this.

    There's a setting in Power Manager called "Optimize for Battery Lifespan" that will NOT charge the battery unless it drops below 96% (or a custom value)...

    If you really want to top it off you have a couple of choices:
    1) unplug, let the machine drop to 95%, and plug back in (should charge to 100%) or
    2) Change the setting under "Battery Maintenance" to "Always Fully Charge".