The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Unable to load Vista from factory recovery disks?

    Discussion in 'Lenovo' started by xwray, Mar 10, 2009.

  1. xwray

    xwray Notebook Enthusiast

    Reputations:
    0
    Messages:
    23
    Likes Received:
    0
    Trophy Points:
    5
    I have an X200 running XP. The X200 was delivered with XP installed and Vista recovery disks. I wanted to see how Vista performed so I decided to load the Vista from the factory recovery disks. There are 3 disks...Disk1 Start Recovery Disk, Disk2 OS System Recovery Disk, and DIisk3 Applications and Drivers Recovery Disk. I have an external Lenovo DVD drive and the BIOS is set to boot from this first.



    I placed Disk 1 into the drive and rebooted. The system loaded and the Rescue and Recovery program came up, did it's thing, and asked for Disk 1 to be inseryed. Well, Disk 1 was already inserted but I ejected and re-inserted it - it said this was not the correct disk. So, I figured Disk 2 might be "disk 1" in this context but it didn't like that one either coughing up the same incorrect disk message. So, only disk 3 is left so I tried that too, same results.



    OK, what am I doing wrong or might Lenovo have include incorrect disks.



    Any help is much appreciated.



    thanks
     
    xwray, Mar 10, 2009
    #1
  2. hitman_36

    hitman_36 Notebook Consultant

    Reputations:
    1
    Messages:
    235
    Likes Received:
    0
    Trophy Points:
    30
    possible that the DVDs are damaged?
     
    hitman_36, Mar 11, 2009
    #2