The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    x230t digitizer fault?

    Discussion in 'Lenovo' started by mikeo1313, Jun 30, 2012.

  1. mikeo1313

    mikeo1313 Notebook Enthusiast

    Reputations:
    0
    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    5
    the pen precision is about 3-5mm off along the edges, is this the way its supposed to be?
     
    mikeo1313, Jun 30, 2012
    #1
  2. ttran

    ttran Notebook Guru

    Reputations:
    0
    Messages:
    68
    Likes Received:
    1
    Trophy Points:
    16
    Hi,

    It should not be that bad though, this is depended a lot on the way you calibrate your pen and then your hand position when you place your hand on the screen, make sure it is the same as when you calibrate it. For more information, please take a look at this short review video about the pen writing of the x230t:
    Lenovo ThinkPad X230T - Touch And Digitizer Input - YouTube
    And
    Lenovo ThinkPad X230T - Calibrate Screen And Digitizer - YouTube

    Since you have your X230t, can I please ask you to look at this thread that I posted and let me know your opinion regarding your system that you own, I'm collecting the opinion to see if the phenomena is common and thus find out the reason behind it:
    http://forum.notebookreview.com/len...ubber-hinges-one-loose-one-tight-reasons.html

    Thanks
     
    ttran, Jul 1, 2012
    #2