Hello,
Here are full hardware details for a commodity system (desktop) I've recently used in Bucharest Romania, under Fedora 10. I hope these details will help driver developers.
Smolt profile:
http://www.smolts.org/client/show/pub_678599ea-31af-481b-b722-02310d74c9ed
[root@localhost ~]# smoltSendProfile -p
UUID: cf518938-0082-41be-a478-4f87bb557ad3
OS: Fedora release 10 (Cambridge)
Default run level: 5
Language: ro_RO.UTF-8
Platform: i686
BogoMIPS: 6385.89
CPU Vendor: GenuineIntel
CPU Model: Intel(R) Pentium(R) 4 CPU 3.20GHz
Number of CPUs: 2
CPU Speed: 3192
System Memory: 1007
System Swap: 0
Vendor: Unknown
System: Unknown
Form factor: unknown
Kernel: 2.6.27.5-117.fc10.i686
SELinux Enabled: True
SELinux Policy: targeted
SELinux Enforce: Enforcing
Devices
=================================
(None:None:None:None) ppdev, Unknown, None, Parallel Port Device
(4254:878:0:0) pci, bttv, CAPTURE, Bt878 Video Capture
(1133:49214:None:None) usb, usbhid, OTHER, USB HID Interface
(None:None:None:None) input, Unknown, None, PC Speaker
(32902:4121:32902:12325) pci, e1000, NETWORK, 82547EI Gigabit Ethernet Controller
(1293:18:None:None) usb, btusb, OTHER, USB Wireless Interface
(4254:2168:0:0) pci, Unknown, OTHER, Bt878 Audio Capture
(1293:18:None:None) usb, btusb, OTHER, USB Wireless Interface
(8888:25602:None:None) usb, cdc_acm, OTHER, USB Data Interface
(1057:1:None:None) usb, Unknown, OTHER, USB Data Interface
(1057:1:None:None) usb, Unknown, OTHER, USB Data Interface
(1057:1:None:None) usb, Unknown, OTHER, USB Communications Interface
(1057:1:None:None) usb, cdc_acm, OTHER, USB Communications Interface
(None:None:None:None) scsi_host, Unknown, None, SCSI Host Adapter
(None:None:None:None) pnp, serial, None, 16550A-compatible COM port
(32902:9427:32902:16986) pci, i801_smbus, OTHER, 82801EB/ER (ICH5/ICH5R) SMBus Controller
(32902:9424:0:0) pci, Unknown, OTHER, 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
(8888:25602:None:None) usb, cdc_acm, OTHER, USB Communications Interface
(None:None:None:None) platform, Unknown, None, Platform Device (floppy.0)
(None:None:None:None) scsi, sd, None, SCSI Device
(None:None:None:None) tty, Unknown, None, Serial Port
(32902:9294:0:0) pci, Unknown, OTHER, 82801 PCI Bridge
(None:None:None:None) platform, Unknown, None, Platform Device (vesafb.0)
(None:None:None:None) scsi_host, Unknown, None, SCSI Host Adapter
(4354:16385:4354:16) pci, firewire_ohci, FIREWIRE, SB Audigy FireWire Port
(None:None:None:None) net, Unknown, NETWORK, Networking Interface
(None:None:None:None) scsi_host, Unknown, None, SCSI Host Adapter
(None:None:None:None) pnp, parport_pc, None, Standard LPT printer port
(None:None:None:None) serio, atkbd, None, i8042 KBD port
(None:None:None:None) scsi_generic, Unknown, None, SCSI Generic Interface
(1057:1:None:None) usb, Unknown, OTHER, USB Communications Interface
(1057:1:None:None) usb, Unknown, OTHER, USB Data Interface
(1057:1:None:None) usb, Unknown, OTHER, USB Communications Interface
(1057:1:None:None) usb, Unknown, OTHER, USB Data Interface
(1057:1:None:None) usb, Unknown, OTHER, USB Communications Interface
(1057:1:None:None) usb, Unknown, OTHER, USB Data Interface
(1057:1:None:None) usb, Unknown, OTHER, USB Communications Interface
(1057:1:None:None) usb, Unknown, OTHER, USB Communications Interface
(1057:1:None:None) usb, Unknown, OTHER, USB Communications Interface
(1057:1:None:None) usb, Unknown, OTHER, USB Data Interface
(None:None:None:None) platform, i8042, None, Platform Device (i8042)
(None:None:None:None) platform, pcspkr, None, Platform Device (pcspkr)
(None:None:None:None) platform, iTCO_wdt, None, Platform Device (iTCO_wdt)
(32902:9431:32902:16986) pci, uhci_hcd, USB, 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3
(None:None:None:None) pnp, rtc_cmos, None, AT Real-Time Clock
(32902:9428:32902:16986) pci, uhci_hcd, USB, 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
(32902:9426:32902:16986) pci, uhci_hcd, USB, 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
(32902:9425:32902:16986) pci, ata_piix, IDE, 82801EB (ICH5) SATA Controller
(None:None:None:None) scsi_host, Unknown, None, SCSI Host Adapter
(None:None:None:None) input, Unknown, MOUSE, Logitech USB-PS/2 Optical Mouse
(None:None:None:None) net, Unknown, NETWORK, Loopback device Interface
(None:None:None:None) video4linux, Unknown, None, BT878 video ( *** UNKNOWN/GENER
(None:None:None:None) scsi_generic, Unknown, None, SCSI Generic Interface
(None:None:None:None) scsi_generic, Unknown, None, SCSI Generic Interface
(4354:4:4354:81) pci, EMU10K1_Audigy, AUDIO, SB Audigy
(4354:28675:4354:64) pci, Emu10k1_gameport, OTHER, SB Audigy Game Port
(None:None:None:None) video4linux, Unknown, None, BT878 video ( *** UNKNOWN/GENER
(None:None:None:None) net, Unknown, NETWORK, Bridge Interface
(1293:18:None:None) usb, Unknown, OTHER, USB Application Specific Interface
(1293:18:None:None) usb, Unknown, OTHER, USB Vendor Specific Interface
(32902:9438:32902:16986) pci, uhci_hcd, USB, 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4
(32902:9437:32902:16986) pci, ehci_hcd, USB, 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
(32902:9435:32902:16986) pci, ata_piix, IDE, 82801EB/ER (ICH5/ICH5R) IDE Controller
(None:None:None:None) scsi_host, Unknown, None, SCSI Host Adapter
(None:None:None:None) pnp, i8042 kbd, None, IBM Enhanced (101/102-key, PS/2 mouse support)
(None:None:None:None) input, Unknown, None, Power Button (FF)
(32902:9595:0:0) pci, Unknown, OTHER, 82875P/E7210 Processor to PCI to CSA Bridge
(None:None:None:None) input, Unknown, MOUSE, Macintosh mouse button emulation
(None:None:None:None) input, Unknown, None, Sleep Button (CM)
(None:None:None:None) tty, Unknown, None, 16550A-compatible COM port
(4139:1317:4139:1601) pci, matroxfb, VIDEO, MGA G400/G450
(None:None:None:None) tty, Unknown, None, Serial Port
(None:None:None:None) platform, serial8250, None, Platform Device (serial8250)
(None:None:None:None) drm, Unknown, None, Direct Rendering Manager Device
(None:None:None:None) scsi, sd, None, SCSI Device
(None:None:None:None) input, Unknown, KEYBOARD, AT Translated Set 2 keyboard
(None:None:None:None) scsi_host, Unknown, None, SCSI Host Adapter
(None:None:None:None) scsi_host, Unknown, None, SCSI Host Adapter
(32902:9593:0:0) pci, Unknown, OTHER, 82875P Processor to AGP Controller
(32902:9592:32902:9592) pci, agpgart-intel, OTHER, 82875P/E7210 Memory Controller Hub
(None:None:None:None) bluetooth, Unknown, None, Bluetooth Host Controller Interface
(None:None:None:None) firewire, Unknown, None, No Description
(None:None:None:None) scsi, sr, None, SCSI Device
Filesystem Information
device mtpt type bsize frsize blocks bfree bavail file ffree favail
===================================================================
/dev/mapper/live-rw / ext3 4096 4096 774084 238690 230834 196608 119807 119807
/dev/sr0 Hidden iso9660 2048 2048 348832 0 0 0 0 0
and the output of lspci -vvv:
[root@localhost ~]# lspci -vvv
00:00.0 Host bridge: Intel Corporation 82875P/E7210 Memory Controller Hub (rev 02)
Subsystem: Intel Corporation 82875P/E7210 Memory Controller Hub
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] Vendor Specific Information <?>
Capabilities: [a0] AGP version 3.0
Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
Kernel driver in use: agpgart-intel
Kernel modules: i82875p_edac
00:01.0 PCI bridge: Intel Corporation 82875P Processor to AGP Controller (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f6800000-f77fffff
Prefetchable memory behind bridge: fc000000-fdffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:03.0 PCI bridge: Intel Corporation 82875P/E7210 Processor to PCI to CSA Bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f7800000-f78fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 425a
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at cc00
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 425a
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d000
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 425a
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d400
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device 425a
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d800
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device 425a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at f7a00000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f7900000-f79fffff
Prefetchable memory behind bridge: fe000000-fe0fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corporation Device 425a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170
Region 3: I/O ports at 0374
Region 4: I/O ports at ffa0
Region 5: Memory at 50000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corporation Device 425a
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at ec00
Region 1: I/O ports at e800
Region 2: I/O ports at e400
Region 3: I/O ports at e000
Region 4: I/O ports at dc00
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
Subsystem: Intel Corporation Device 425a
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at c800
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400/G450 (rev 82) (prog-if 00 [VGA controller])
Subsystem: Matrox Graphics, Inc. Millennium G450 32Mb SDRAM Dual Head
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at f7020000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at f6800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at f7000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [f0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
Kernel driver in use: matroxfb
Kernel modules: matroxfb_base
02:01.0 Ethernet controller: Intel Corporation 82547EI Gigabit Ethernet Controller
Subsystem: Intel Corporation D875PBZ motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f7800000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at ac00
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Kernel driver in use: e1000
Kernel modules: e1000
03:02.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
Subsystem: Creative Labs SB0090 Audigy Player
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at b800
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1
03:02.1 Input device controller: Creative Labs SB Audigy Game Port (rev 03)
Subsystem: Creative Labs SB Audigy MIDI/Game Port
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: I/O ports at bc00
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: Emu10k1_gameport
Kernel modules: emu10k1-gp
03:02.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (prog-if 10 [OHCI])
Subsystem: Creative Labs SB Audigy FireWire Port
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at f7904000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f7900000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
03:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe001000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: bttv
Kernel modules: bttv
03:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fe000000 (32-bit, prefetchable) [size=4K]
Răzvan
Hardware details for Fedora 10 (desktop system no. 1)
Discussion in 'Linux Compatibility and Software' started by rsandu, Jan 4, 2009.