The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Hardware details for Fedora 10 (desktop system no. 2)

    Discussion in 'Linux Compatibility and Software' started by rsandu, Jan 4, 2009.

  1. rsandu

    rsandu Notebook Enthusiast

    Reputations:
    0
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    5
    Hello,

    Here are full hardware details for a commodity system (desktop) I've recently used in Bucharest Romania, under Fedora 10. I hope these details will help driver developers.

    Smolt profile:

    http://www.smolts.org/client/show/pub_58e235ab-51b6-447f-9ae0-4a562243391b

    or:

    [root@newton ~]# smoltSendProfile -p
    UUID: 37a61f69-6ae4-488a-b3ac-d585fc8c7f4e
    OS: Fedora release 10 (Cambridge)
    Default run level: 3
    Language: ro_RO.UTF-8
    Platform: i686
    BogoMIPS: 3189.58
    CPU Vendor: GenuineIntel
    CPU Model: Intel(R) Pentium(R) 4 CPU 1.60GHz
    Number of CPUs: 1
    CPU Speed: 12999
    System Memory: 501
    System Swap: 1961
    Vendor: Unknown
    System: Unknown
    Form factor: unknown
    Kernel: 2.6.27.9-159.fc10.i686
    SELinux Enabled: True
    SELinux Policy: targeted
    SELinux Enforce: Permissive

    Devices
    =================================
    (None:None:None:None) ppdev, Unknown, None, Parallel Port Device
    (None:None:None:None) pnp, i8042 aux, None, Microsoft PS/2-style Mouse
    (None:None:None:None) platform, Unknown, None, Platform Device (floppy.0)
    (4139:9511:4139:3972) pci, matroxfb, VIDEO, MGA G550 AGP
    (None:None:None:None) input, Unknown, None, PC Speaker
    (None:None:None:None) pnp, rtc_cmos, None, AT Real-Time Clock
    (None:None:None:None) net, Unknown, NETWORK, Networking Interface
    (None:None:None:None) pnp, serial, None, 16550A-compatible COM port
    (32902:4649:32902:4160) pci, e100, NETWORK, 82557/8/9/0/1 Ethernet Pro 100
    (None:None:None:None) scsi_generic, Unknown, None, SCSI Generic Interface
    (None:None:None:None) scsi_host, Unknown, None, SCSI Host Adapter
    (None:None:None:None) scsi_host, Unknown, None, SCSI Host Adapter
    (None:None:None:None) scsi, sd, None, SCSI Device
    (None:None:None:None) tty, Unknown, None, 16550A-compatible COM port
    (32902:9285:32902:20564) pci, Intel ICH, AUDIO, 82801BA/BAM AC'97 Audio Controller
    (32902:9284:32902:20564) pci, uhci_hcd, USB, 82801BA/BAM USB Controller #1
    (32902:9282:32902:20564) pci, uhci_hcd, USB, 82801BA/BAM USB Controller #1
    (32902:9280:0:0) pci, Unknown, OTHER, 82801BA ISA Bridge (LPC)
    (None:None:None:None) serio, Unknown, None, i8042 AUX port
    (None:None:None:None) net, Unknown, NETWORK, No Description
    (32902:6704:0:0) pci, agpgart-intel, OTHER, 82845 845 [Brookdale] Chipset Host Bridge
    (32902:6705:0:0) pci, Unknown, OTHER, 82845 845 [Brookdale] Chipset AGP Bridge
    (32902:9294:0:0) pci, Unknown, OTHER, 82801 PCI Bridge
    (None:None:None:None) pnp, parport_pc, None, ECP printer port
    (32902:9291:32902:20564) pci, ata_piix, IDE, 82801BA IDE U100 Controller
    (None:None:None:None) net, Unknown, NETWORK, Loopback device Interface
    (None:None:None:None) scsi_host, Unknown, None, SCSI Host Adapter
    (None:None:None:None) scsi_host, Unknown, None, SCSI Host Adapter
    (None:None:None:None) net, Unknown, NETWORK, No Description
    (None:None:None:None) net, Unknown, NETWORK, No Description
    (None:None:None:None) platform, i8042, None, Platform Device (i8042)
    (None:None:None:None) platform, pcspkr, None, Platform Device (pcspkr)
    (None:None:None:None) platform, Unknown, None, Platform Device (iTCO_wdt)
    (None:None:None:None) net, Unknown, NETWORK, Networking Interface
    (None:None:None:None) scsi, sd, None, SCSI Device
    (None:None:None:None) net, Unknown, NETWORK, No Description
    (None:None:None:None) scsi_generic, Unknown, None, SCSI Generic Interface
    (None:None:None:None) pnp, i8042 kbd, None, IBM Enhanced (101/102-key, PS/2 mouse support)
    (None:None:None:None) net, Unknown, NETWORK, Networking Interface
    (None:None:None:None) input, Unknown, None, Power Button (FF)
    (None:None:None:None) input, Unknown, MOUSE, Macintosh mouse button emulation
    (None:None:None:None) input, Unknown, None, Power Button (CM)
    (None:None:None:None) tty, Unknown, None, 16550A-compatible COM port
    (None:None:None:None) platform, serial8250, None, Platform Device (serial8250)
    (None:None:None:None) serio, Unknown, None, i8042 KBD port
    (32902:9283:32902:20564) pci, i801_smbus, OTHER, 82801BA/BAM SMBus Controller
    (None:None:None:None) platform, smsc47m1, None, Platform Device (smsc47m1.2048)
    (None:None:None:None) scsi_generic, Unknown, None, SCSI Generic Interface
    (4279:37376:4279:4096) pci, 3c59x, NETWORK, 3c905C-TX/TX-M [Tornado]
    (None:None:None:None) platform, Unknown, None, Platform Device (vesafb.0)
    (32902:4220:32902:4982) pci, e1000, NETWORK, 82541PI Gigabit Ethernet Controller
    (None:None:None:None) pnp, serial, None, 16550A-compatible COM port
    (None:None:None:None) scsi, sr, None, SCSI Device

    Filesystem Information
    device mtpt type bsize frsize blocks bfree bavail file ffree favail
    ===================================================================
    /dev/root / ext3 4096 4096 18772944 12599980 11630960 19398656 19057642 19057642
    /dev/sda1 /boot ext3 1024 1024 489992 327310 302010 126976 126922 126922


    and the output of lspci -vvv:


    [root@newton ~]# lspci -vvv
    00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
    Latency: 0
    Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
    Capabilities: [e4] Vendor Specific Information <?>
    Capabilities: [a0] AGP version 2.0
    Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
    Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
    Kernel driver in use: agpgart-intel

    00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: fd800000-fe8fffff
    Prefetchable memory behind bridge: f1500000-f55fffff
    Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 05) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
    I/O behind bridge: 0000d000-0000dfff
    Memory behind bridge: fe900000-feafffff
    Prefetchable memory behind bridge: f5600000-f56fffff
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
    PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

    00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 05)
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Kernel modules: iTCO_wdt, intel-rng

    00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 Controller (rev 05) (prog-if 80 [Master])
    Subsystem: Intel Corporation Device 5054
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled]
    Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled]
    Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled]
    Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled]
    Region 4: I/O ports at ffa0
    Kernel driver in use: ata_piix

    00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 05) (prog-if 00 [UHCI])
    Subsystem: Intel Corporation Device 5054
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin D routed to IRQ 19
    Region 4: I/O ports at ef40
    Kernel driver in use: uhci_hcd

    00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus Controller (rev 05)
    Subsystem: Intel Corporation Device 5054
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin B routed to IRQ 17
    Region 4: I/O ports at efa0
    Kernel driver in use: i801_smbus
    Kernel modules: i2c-i801

    00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB Controller #1 (rev 05) (prog-if 00 [UHCI])
    Subsystem: Intel Corporation Device 5054
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 23
    Region 4: I/O ports at ef80
    Kernel driver in use: uhci_hcd

    00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio Controller (rev 05)
    Subsystem: Intel Corporation Device 5054
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 17
    Region 0: I/O ports at e800
    Region 1: I/O ports at ef00
    Kernel driver in use: Intel ICH
    Kernel modules: snd-intel8x0

    01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (rev 01) (prog-if 00 [VGA controller])
    Subsystem: Matrox Graphics, Inc. Millennium G550 Dual Head DDR 32Mb
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at f2000000 (32-bit, prefetchable) [size=32M]
    Region 1: Memory at fe8fc000 (32-bit, non-prefetchable) [size=16K]
    Region 2: Memory at fe000000 (32-bit, non-prefetchable) [size=8M]
    Expansion ROM at fe8c0000 [disabled] [size=128K]
    Capabilities: [dc] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [f0] AGP version 2.0
    Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
    Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
    Kernel driver in use: matroxfb
    Kernel modules: matroxfb_base

    02:0a.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
    Subsystem: 3Com Corporation 3C905CX-TX/TX-M Fast Etherlink for PC Management NIC
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 22
    Region 0: I/O ports at dc00
    Region 1: Memory at feaffc00 (32-bit, non-prefetchable)
    Expansion ROM at f5600000 [disabled] [size=128K]
    Capabilities: [dc] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=2 PME-
    Kernel driver in use: 3c59x
    Kernel modules: 3c59x

    02:0c.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
    Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (63750ns min), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 17
    Region 0: Memory at feaa0000 (32-bit, non-prefetchable) [size=128K]
    Region 1: Memory at fea80000 (32-bit, non-prefetchable) [size=128K]
    Region 2: I/O ports at df00
    Expansion ROM at f5620000 [disabled] [size=128K]
    Capabilities: [dc] Power Management version 2
    Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=1 PME-
    Capabilities: [e4] PCI-X non-bridge device
    Command: DPERE- ERO+ RBC=512 OST=1
    Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
    Kernel driver in use: e1000
    Kernel modules: e1000

    02:0d.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 0c)
    Subsystem: Intel Corporation EtherExpress PRO/100 S Server Adapter
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 21
    Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
    Region 1: I/O ports at de80
    Region 2: Memory at fea40000 (32-bit, non-prefetchable) [size=128K]
    Capabilities: [dc] Power Management version 2
    Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=2 PME-
    Kernel driver in use: e100
    Kernel modules: e100


    Regards,
    Răzvan
     
    rsandu, Jan 4, 2009
    #1