Linux on the Apple MacBook Pro 5,5 (Summer 2009)

Howto guide for Debian GNU/Linux on the Apple MacBook Pro 5,5 (Summer 2009)



Last updated: Mon Jun 21 07:40 UTC 2010





Contents:

Status

Installation

Booting Linux by default

Upgrade to Sid

Kernel

Graphics drivers

Wireless


Touchpad

Keyboard

Sound

LCD Brightness

Fan control

Recommended packages

Resources



Appendices:


Building the latest rc kernel

Problems upgrading dkms packages

System Information



I'm dual booting OS X 10.6.1 and Debian Sid AMD64. Specs of my 13" MBP:

Code:

 Model Name:	MacBook Pro
  Model Identifier:	MacBookPro5,5
  Processor Name:	Intel Core 2 Duo
  Processor Speed:	2.53 GHz
  Number Of Processors:	1
  Total Number Of Cores:	2
  L2 Cache:	3 MB
  Memory:	4 GB
  Bus Speed:	1.07 GHz
  Boot ROM Version:	MBP55.00AC.B03
  SMC Version (system):	1.47f2

<a name=status> Status[/URL]


Not working yet:

-Expose and Dashboard hotkeys



Works (out of the box):

-Bluetooth

-Camera

-Suspend and resume




Works (after some tweaks):

-Wireless (via proprietary Broadcom STA module).


-Sound with headphone sensing and digital (optical) switch (via manual ALSA build). See important note below about volume balance.

-NVIDIA 9400M GPU with HDMI out over Mini DisplayPort (via proprietary NVIDIA drivers). Note: hardware does NOT support HDMI audio -- Mini DisplayPort cannot carry audio signals.

-Touchpad two finger scrolling, two finger right click, three finger 3rd button, click-and-drag (via bcm5974-dkms).

-Rebooting and halting the machine works with 2.6.31 and later but not .30 or earlier

-Light sensor (via pommed).

-Keyboard backlight, adjustment with F5 and F6 (via pommed).


-LCD backlight adjustment with F1 and F2 (via pommed and nvidia-bl).



<a name=installation> Installation[/URL]


Step 1. Upgrade to Snow Leopard. (optional)

Step 2. Resize primary partition to 120GB (or whatever). Open the Terminal (from Applications->Utilities) and run:

Code:

Code:

diskutil list
sudo diskutil resizevolume disk0s2 120G

Where 120G is 120GB or however much space you want to leave for OS X out of your whole disk.

Step 3. Reboot.

Step 4. Create MS-DOS partition in Disk Utility (from Applications->Utilities) to fill up free space. Do not choose a different partition type besides MS-DOS.


Step 5. Install rEFIt. If rEFIt doesn't show up immediately upon rebooting, in OS X open the Terminal (from Applications->Utilities) and run:

Code:

Code:

cd /efi/refit
./enable.sh

You may need to enter your password (or press enter for a blank password).

Step 6. Burn Debian 5.0.3 AMD64 Netinst ISO and reboot holding the C key (note: the latest Squeeze daily build did not work for me it would hang after setting console mode to UTF-8).


Step 7. Start Debian installer with Ethernet plugged in, go through first steps.

Step 8. Choose manual partitioning and delete the MS-DOS partition. In its space create a primary Linux and swap partitions. Other partitions for sharing data are optional. Format the partitions and make sure the primary Linux partition is bootable.

Step 9. Configure package sources and install base system. Choose software and install the rest of the system up until the bootloader.

Step 10. When prompted to install GRUB select 'Go Back'. Hit Fn+control+option+F2 to get to the terminal. Hit return. The partitions need to be synchronized:

Code:

Code:

chroot /target
aptitude install refit
/sbin/gptsync /dev/sda

Step 12. Now install GRUB where /dev/sda4 is the linux system partition:

Code:

Code:

aptitude install grub
grub-install /dev/sda4
update-grub

Step 13. Hit Fn+control+option+F1, complete the installation and reboot.


Step 14. Choose Linux from the rEFIt menu and boot Debian.



<a name=default> Boot Linux by default[/URL]

This is optional. If you want OS X to be your default OS, skip this section.




Boot OS X and open the Terminal. Run:

Code:

Code:

nano +93 /efi/refit/refit.conf

You should start on a line that reads:

Code:

Code:

#legacyfirst

Hit Fn+Delete to remove the # from the beginning of the line (to uncomment it).

Optional: If you want to change the timeout (default 5 seconds), it is at the top of the file. Press Control+w and type timeout and press return and you should see it.


Hit Control+o (the letter O NOT number 0) and press Enter/Return to save the file.



<a name=sid> Upgrade to Sid[/URL]

Edit your /etc/apt/sources.list (as root) to read:

Code:

Code:

deb [url]http://mirrors.kernel.org/debian/[/url] sid main contrib non-free
deb-src [url]http://mirrors.kernel.org/debian/[/url] sid main contrib non-free

Comment out (or delete) any other lines. Then update the package list and do the upgrade:

Code:

Code:

apt-get update && apt-get dist-upgrade

<a name=kernel> Kernel[/URL]

First get a few packages installed (as root):

Code:

Code:

apt-get install build-essential kernel-package

Next, add your regular user account to the src group (as root):

Code:

Code:

adduser yourname src

Copy over the kernel installation scripts (otherwise no initrd will be created and the system won't boot until a manual mkinitramfs) as root:

Code:

Code:

cp /usr/share/kernel-package/examples/etc/kernel/postinst.d/initramfs /etc/kernel/postinst.d/
cp /usr/share/kernel-package/examples/etc/kernel/postrm.d/initramfs /etc/kernel/postrm.d/

Log out and back in (restart X) from System->Log Out.



After logging back in with your regular user account you will have write access on /usr/src. Next, download and build the kernel as a regular user (not root).

Code:

Code:

cd /usr/src
wget [url]http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.31.13.tar.bz2[/url]
tar jxvf linux-2.6.31.13.tar.bz2
cd linux-2.6.31.13
export CONCURRENCY_LEVEL=2
wget -O .config [url]http://allurgroceries.com/mbp55/config-2.6.31.6[/url]
make oldconfig && make prepare
make-kpkg clean
fakeroot make-kpkg --initrd kernel_image kernel_headers

This should take about an hour or so. After it finishes, install the .debs in the parent directory and update grub (as root):

Code:

Code:

dpkg -i /usr/src/linux-image-2.6.31.13_2.6.31.13-10.00.Custom_amd64.deb /usr/src/linux-headers-2.6.31.13_2.6.31.13-10.00.Custom_amd64.deb
update-grub

Now reboot and select the 2.6.31.13 kernel from the boot menu.



<a name=graphics> Graphics drivers[/URL]

Hit Fn+control+option+F1 if you are in a graphical environment.

Code:

Code:

/etc/init.d/gdm stop
cd ~
wget [url]http://us.download.nvidia.com/XFree86/Linux-x86_64/195.36.31/NVIDIA-Linux-x86_64-195.36.31-pkg2.run[/url]
chmod +x NVIDIA-Linux-x86_64-195.36.31-pkg2.run
modprobe -r nvidia
./NVIDIA-Linux-x86_64-195.36.31-pkg2.run -Nqa --ui=none
nvidia-xconfig
/etc/init.d/gdm start

Optional: install my xorg.conf which has PowerMizer enabled to throttle back the GPU when it's not being used by 3D apps. Also disables the NVIDIA logo on X startup. Do this as root (use sudo if needed):

Code:

Code:

mv /etc/X11/xorg.conf /etc/X11/xorg.conf.old
wget -O /etc/X11/xorg.conf http://allurgroceries.com/mbp55/xorg.conf

<a name=wireless> Wireless[/URL]


First make sure that the b43 module is not installed and loaded because it does not support the BCM4322 in the MBP5,5 and it will cause conflicts (lockups).



Check to see if b43 is loaded (as root):

Code:

Code:

lsmod | grep b43

If anything is listed, it means the module is loaded. Unload it (as root):

Code:

Code:

modprobe -r b43

To prevent the module from loading on startup, add it to the blacklist (as root):

Code:

Code:

echo "blacklist b43" >> /etc/modprobe.d/blacklist.conf
echo "blacklist ssb" >> /etc/modprobe.d/blacklist.conf

Now install the wireless drivers:

Code:

Code:

apt-get update
apt-get install wireless-tools
cd /usr/src
mkdir wl
cd wl
wget [url]http://www.broadcom.com/docs/linux_sta/hybrid-portsrc-x86_64-v5.10.91.9.3.tar.gz[/url]
tar zxvf hybrid-portsrc-x86_64-v5.10.91.9.3.tar.gz
KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd`
install -D -m 755 wl.ko /lib/modules/`uname -r`/kernel/drivers/net/wireless/wl.ko
depmod -r
modprobe wl
echo wl >> /etc/modules

<a name=touchpad> Touchpad[/URL]

First, configure the touchpad by creating /etc/hal/fdi/policy/x11-synaptics-bcm5974.fdi. There is an example file here:

https://help.ubuntu.com/community/Ma...aunty#Touchpad




Next, install dkms and get a patched bcm5974-dkms that enables click-and-drag:

Code:

Code:

apt-get install dkms
wget [url]http://launchpadlibrarian.net/24871974/bcm5974-dkms_1.1.4_all_test.deb[/url]
dpkg -i bcm5974-dkms_1.1.4_all_test.deb
modprobe -r bcm5974
modprobe bcm5974

Click and drag will work, but you must click first and then place 2nd finger down to drag, otherwise it ends up a right click (remember -- two fingers to right click and three for the 3rd mouse button).



<a name=keyboard> Keyboard[/URL]

To get the keyboard backlight working (with F5 and F6 to control it):

Code:

Code:

apt-get install pommed

Also see the resources section below on how to manually control the keyboard backlight level.




<a name=sound> Sound[/URL]

First install the build dependencies, then get the ALSA driver source, compile it, install, and reload ALSA. Note that the pulseaudio line is optional. If you are not running pulseaudio disregard that command below. Most Ubuntu users probably have it enabled.

Code:

Code:

apt-get build-dep alsa-source
wget [url]ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.21.tar.bz2[/url]
tar jxvf alsa-driver-1.0.21.tar.bz2
cd alsa-driver-1.0.21
./configure
make
make install
/etc/init.d/pulseaudio stop
alsa force-reload

Sound will now work.* You may notice that the left channel is louder than the right at first. This is because the mixer has the 'Surround Speaker' switch off by default and its levels at 0. Enable the switch in your mixer (gnome-alsamixer for example) and turn up its channel and the levels should even out. This is by hardware design - the left speaker is above the Esc key and the right is below the return key, thus the left is more directly exposed and reflects off of the LCD. With the surround speaker ("subwoofer") enabled it will sound even between left and right channels.



*Ubuntu users: If sound doesn't work still, try this:


http://ubuntuforums.org/showthread.p...68#post8076668



How to stop the terribly annoying volume adjustment sound. Edit /etc/pommed.conf

Code:

Code:

# Audio support
audio {
	# Use amixer or alsamixer/alsamixergui to determine the sound card
	# and the mixer elements to use here.

	# sound card to use
	card = "default"
	# initial volume [80] (0 - 100%, -1 to disable)
	init = -1
	# step value (1 - 50%)
	step = 10
	# beep on volume change[B]
	beep = no[/B]

<a name=lcd> LCD Brightness[/URL]


This requires nvidia-bl-dkms from the Mactel PPA along with pommed 1.29 or later.




First install nvidia-bl-dkms:

Code:

Code:

wget [url]https://launchpad.net/~mactel-support/+archive/ppa/+files/nvidia-bl-dkms_0.16.9~lucid_all.deb[/url]
dpkg -i nvidia-bl-dkms_0.16.9~lucid_all.deb

Then, blacklist mbp_nvidia_bl and add nvidia_bl to /etc/modules:

Code:

Code:

echo "blacklist mbp_nvidia_bl" >> /etc/modprobe.d/blacklist.conf
echo "nvidia_bl" >> /etc/modules

Reboot and the backlight control with F1 and F2 should work now (inside X and at the terminal).



Update: pommed seems to be killing my backlight brightness now when I unplug from AC power. Also the step is too low so I have to hold down the brightness keys forever for it to change. Here's a workaround. Edit /etc/pommed.conf, the changes are in bold:

Code:

Code:

# sysfs backlight control
# nVidia machines, will fall back to nv8600gmt if not supported by the kernel
lcd_sysfs {
        # The sysfs backlight control is a generic interface provided
        # by the Linux kernel for backlight control on most graphic cards.
        # The brightness range can differ depending on the hardware.

        # initial backlight level [12] (0 - 15, -1 to disable)
        init = -1
        # step value (1 - 2)
        [B]step = 32[/B]

        # backlight level when on battery [6] (1 - 15, 0 to disable)
        [B]on_batt = 1024[/B]
}

Then restart pommed:

Code:

Code:

/etc/init.d/pommed restart

OBSOLETE: This is for reference if you used the previous method with a patched version of gnome-power-manager. Here is how to remove and reinstall the stock gnome-power-manager package:

Code:

Code:

dpkg -P gnome-power-manager
apt-get install gnome-power-manager

<a name=fan> Fan control[/URL]

With the use of the applesmc module the fan can be manually controlled:

Code:

Code:

echo 1 > /sys/devices/platform/applesmc.768/fan1_manual
echo 7000 > /sys/devices/platform/applesmc.768/fan1_min

<a name=packages> Recommended packages[/URL]

Preload "is an adaptive readahead daemon. It monitors applications that users run, and by analyzing this data, predicts what applications users might run, and fetches those binaries and their dependencies into memory for faster startup times."

Code:

Code:

apt-get install preload

cpufrequtils: "utilities to deal with the cpufreq Linux kernel feature". Use with cpufreq-applet (part of the gnome-applets package).

Code:

Code:

apt-get install cpufrequtils

blueman: Gnome applet to control bluetooth.

Code:

Code:

apt-get install blueman

sensors-applet: Display readings from hardware sensors in your Gnome panel.

Code:

Code:

apt-get install sensors-applet

Laptop Mode Tools "is a laptop power saving package for Linux systems. It allows you to extend the battery life of your laptop, in several ways. It is the primary way to enable the Laptop Mode feature of the Linux kernel, which lets your hard drive spin down. In addition, it allows you to tweak a number of other power-related settings using a simple configuration file."

Code:

Code:

apt-get install laptop-mode-tools

<a name=resources> Resources:[/URL]

http://wiki.debian.org/MacBook

https://help.ubuntu.com/community/MacBookPro5-5/Jaunty

https://help.ubuntu.com/community/MacBookPro5-5/Karmic



Wireless:

http://www.broadcom.com/support/802.11/linux_sta.php



Sound:


http://ubuntuforums.org/showthread.p...17#post7627817




Touchpad click and drag:

https://bugs.edge.launchpad.net/mact...rt/+bug/356317



Keyboard backlight (manual control):

https://bugs.launchpad.net/ubuntu/+s...945/comments/3



LCD backlight:

http://lists.alioth.debian.org/piper...09-October.txt (this patch is included in pommed 1.29).


http://ubuntuforums.org/showpost.php...1&amp;postcount=13



NVIDIA drivers:

http://www.nvnews.net/vbulletin/showthread.php?t=122606



Disassembly (teardown):

http://www.ifixit.com/Teardown/MacBo...-Unibody/814/1



<a name=rckernel> Building the latest rc kernel[/URL]


THIS IS VERY OLD - for reference only.

Code:

Code:

cd /usr/src
wget [url]http://www.kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.32-rc7.tar.bz2[/url]
tar jxvf linux-2.6.32-rc7.tar.bz2
cd linux-2.6.32-rc7
export CONCURRENCY_LEVEL=2
wget -O .config [url]http://allurgroceries.com/mbp55/config-2.6.32-rc7[/url]
make oldconfig && make prepare
fakeroot make-kpkg clean
fakeroot make-kpkg --initrd kernel_image kernel_headers
sudo dpkg -i /usr/src/linux-image-2.6.32-rc7_2.6.32-rc7-10.00.Custom_amd64.deb /usr/src/linux-headers-2.6.32-rc7_2.6.32-rc7-10.00.Custom_amd64.deb
sudo update-grub

<a name=dkmsproblem> Problems upgrading DKMS packages[/URL]

If you have trouble upgrading dkms packages with an error like 'bad config file' or similar, move the dkms files out of the way and reinstall the deb.




Example for nvidia-bl:

Code:

Code:

mv /var/lib/dkms/nvidia_bl ~/nvidia_bl.old

Example for bcm5974:

Code:

Code:

mv /var/lib/dkms/bcm5974 ~/bcm5974.old

Now reinstall the deb packages and there should be no errors.[/div]
System Information

lspci:

Code:

Code:

00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b3)
00:03.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.2 SMBus: nVidia Corporation MCP79 SMBus (rev b1)
00:03.3 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.4 RAM memory: nVidia Corporation Device 0a98 (rev b1)
00:03.5 Co-processor: nVidia Corporation MCP79 Co-processor (rev b1)
00:04.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
00:04.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
00:06.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
00:06.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
00:09.0 PCI bridge: nVidia Corporation MCP79 PCI Bridge (rev b1)
00:0a.0 Ethernet controller: nVidia Corporation MCP79 Ethernet (rev b1)
00:0b.0 IDE interface: nVidia Corporation MCP79 SATA Controller (rev b1)
00:10.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
00:15.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
00:16.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1)
02:00.0 VGA compatible controller: nVidia Corporation C79 [GeForce 9400M] (rev b1)
03:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
04:00.0 FireWire (IEEE 1394): Agere Systems FW643 PCI Express1394b Controller (PHY/Link) (rev 07)

lspci -v:

Code:

Code:

00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
	Flags: bus master, 66MHz, fast devsel, latency 0

00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
	Flags: bus master, 66MHz, fast devsel, latency 0

00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b3)
	Subsystem: nVidia Corporation Device cb79
	Flags: bus master, 66MHz, fast devsel, latency 0
	I/O ports at 2000 [size=256]

00:03.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
	Flags: 66MHz, fast devsel

00:03.2 SMBus: nVidia Corporation MCP79 SMBus (rev b1)
	Subsystem: nVidia Corporation Device cb79
	Flags: 66MHz, fast devsel, IRQ 15
	I/O ports at 2180 [size=64]
	I/O ports at 2140 [size=64]
	I/O ports at 2100 [size=64]
	Capabilities: [44] Power Management version 2
	Kernel driver in use: nForce2_smbus

00:03.3 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
	Flags: 66MHz, fast devsel

00:03.4 RAM memory: nVidia Corporation Device 0a98 (rev b1)
	Subsystem: nVidia Corporation Device cb79
	Flags: 66MHz, fast devsel

00:03.5 Co-processor: nVidia Corporation MCP79 Co-processor (rev b1)
	Subsystem: nVidia Corporation Device cb79
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
	Memory at d3400000 (32-bit, non-prefetchable) [size=512K]

00:04.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1) (prog-if 10 [OHCI])
	Subsystem: nVidia Corporation Device cb79
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 18
	Memory at d3488000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
	Kernel driver in use: ohci_hcd

00:04.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1) (prog-if 20 [EHCI])
	Subsystem: nVidia Corporation Device cb79
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
	Memory at d3489200 (32-bit, non-prefetchable) [size=256]
	Capabilities: [44] Debug port: BAR=1 offset=00a0
	Capabilities: [80] Power Management version 2
	Kernel driver in use: ehci_hcd

00:06.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1) (prog-if 10 [OHCI])
	Subsystem: nVidia Corporation Device cb79
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
	Memory at d3487000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
	Kernel driver in use: ohci_hcd

00:06.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1) (prog-if 20 [EHCI])
	Subsystem: nVidia Corporation Device cb79
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 19
	Memory at d3489100 (32-bit, non-prefetchable) [size=256]
	Capabilities: [44] Debug port: BAR=1 offset=00a0
	Capabilities: [80] Power Management version 2
	Kernel driver in use: ehci_hcd

00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
	Subsystem: nVidia Corporation Device cb79
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
	Memory at d3480000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [44] Power Management version 2
	Kernel driver in use: HDA Intel

00:09.0 PCI bridge: nVidia Corporation MCP79 PCI Bridge (rev b1) (prog-if 01 [Subtractive decode])
	Flags: bus master, 66MHz, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: d3300000-d33fffff
	Capabilities: [b8] Subsystem: nVidia Corporation Device cb79

00:0a.0 Ethernet controller: nVidia Corporation MCP79 Ethernet (rev b1)
	Subsystem: nVidia Corporation Device cb79
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 27
	Memory at d3486000 (32-bit, non-prefetchable) [size=4K]
	I/O ports at 21e0 [size=8]
	Memory at d3489000 (32-bit, non-prefetchable) [size=256]
	Memory at d3489300 (32-bit, non-prefetchable) [size=16]
	Capabilities: [44] Power Management version 2
	Capabilities: [50] MSI: Enable+ Count=1/16 Maskable+ 64bit+
	Kernel driver in use: forcedeth

00:0b.0 IDE interface: nVidia Corporation MCP79 SATA Controller (rev b1) (prog-if 85 [Master SecO PriO])
	Subsystem: nVidia Corporation Device cb79
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 26
	I/O ports at 21d8 [size=8]
	I/O ports at 21ec [size=4]
	I/O ports at 21d0 [size=8]
	I/O ports at 21e8 [size=4]
	I/O ports at 21c0 [size=16]
	Memory at d3484000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: [44] Power Management version 2
	Capabilities: [8c] SATA HBA ?
	Capabilities: [b0] MSI: Enable+ Count=1/8 Maskable- 64bit+
	Kernel driver in use: ahci

00:10.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: d2000000-d30fffff
	Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
	Capabilities: [40] Subsystem: nVidia Corporation Device 0000
	Capabilities: [48] Power Management version 2
	Capabilities: [50] MSI: Enable- Count=1/2 Maskable- 64bit+

00:15.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: d3200000-d32fffff
	Capabilities: [40] Subsystem: nVidia Corporation Device 0000
	Capabilities: [48] Power Management version 3
	Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
	Capabilities: [80] Express Root Port (Slot+), MSI 00
	Kernel driver in use: pcieport

00:16.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	Memory behind bridge: d3100000-d31fffff
	Capabilities: [40] Subsystem: nVidia Corporation Device 0000
	Capabilities: [48] Power Management version 3
	Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
	Capabilities: [80] Express Root Port (Slot+), MSI 00
	Kernel driver in use: pcieport

02:00.0 VGA compatible controller: nVidia Corporation C79 [GeForce 9400M] (rev b1) (prog-if 00 [VGA controller])
	Subsystem: Apple Computer Inc. Device 00b9
	Flags: bus master, fast devsel, latency 0, IRQ 22
	Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
	Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Memory at d0000000 (64-bit, prefetchable) [size=32M]
	I/O ports at 1000 [size=128]
	[virtual] Expansion ROM at d3000000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
	Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
	Kernel driver in use: nvidia

03:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
	Subsystem: Apple Computer Inc. Device 008d
	Flags: bus master, fast devsel, latency 0, IRQ 23
	Memory at d3200000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [40] Power Management version 3
	Capabilities: [58] Vendor Specific Information ?
	Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+
	Capabilities: [d0] Express Endpoint, MSI 00
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [13c] Virtual Channel ?
	Capabilities: [160] Device Serial Number
	Capabilities: [16c] Power Budgeting ?

	Kernel driver in use: wl

04:00.0 FireWire (IEEE 1394): Agere Systems FW643 PCI Express1394b Controller (PHY/Link) (rev 07) (prog-if 10 [OHCI])
	Subsystem: Agere Systems Device 5900
	Flags: bus master, fast devsel, latency 0, IRQ 22
	Memory at d3100000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 3
	Capabilities: [4c] MSI: Enable- Count=1/1 Maskable- 64bit+
	Capabilities: [60] Express Endpoint, MSI 00
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [140] Virtual Channel ?
	Capabilities: [170] Device Serial Number 00-00-00-00-00-00-00-00
	Kernel driver in use: firewire_ohci

lsusb:

Code:

Bus 004 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 004 Device 003: ID 05ac:8213 Apple, Inc.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 05ac:0236 Apple, Inc.
Bus 003 Device 002: ID 05ac:8242 Apple, Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 05ac:8507 Apple, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 05ac:8403 Apple, Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

lshw:

Code:

Code:

    description: Notebook
    product: MacBookPro5,5
    vendor: Apple Inc.
    version: 1.0
    serial:
    width: 64 bits
    capabilities: smbios-2.4 dmi-2.4 vsyscall64 vsyscall32
    configuration: boot=normal chassis=notebook uuid=
  *-core
       description: Motherboard
       product: Mac-F2268AC8
       vendor: Apple Inc.
       physical id: 0
       serial: Base Board Serial#
       slot: Part Component
     *-cpu:0
          description: CPU
          product: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz
          vendor: Intel Corp.
          physical id: 0
          bus info: cpu@0
          version: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz
          slot: U2E1
          size: 798MHz
          capacity: 2530MHz
          width: 64 bits
          clock: 266MHz
          capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm tpr_shadow vnmi flexpriority cpufreq
        *-cache
             description: L1 cache
             physical id: 2
             slot: Unknown
             size: 32KiB
             capacity: 32KiB
             capabilities: asynchronous internal write-back data
     *-cache:0
          description: L1 cache
          physical id: 1
          slot: Unknown
          size: 32KiB
          capacity: 32KiB
          capabilities: asynchronous internal write-back instruction
     *-cpu:1
          description: CPU
          vendor: Intel(R) Corporation
          physical id: 3
          bus info: cpu@1
          version: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz
          slot: U2E1
          size: 798MHz
          capacity: 2530MHz
          clock: 266MHz
          capabilities: cpufreq
        *-cache
             description: L1 cache
             physical id: 5
             slot: Unknown
             size: 32KiB
             capacity: 32KiB
             capabilities: asynchronous internal write-back data
     *-cache:1
          description: L1 cache
          physical id: 4
          slot: Unknown
          size: 32KiB
          capacity: 32KiB
          capabilities: asynchronous internal write-back instruction
     *-memory
          description: System Memory
          physical id: 6
          slot: System board or motherboard
          size: 4GiB
        *-bank:0
             description: SODIMM Synchronous 1067 MHz (0.9 ns)
             product: 0x31364A53463235363634485A2D3147314631
             vendor: 0x802C
             physical id: 0
             serial:
             slot: DIMM0
             size: 2GiB
             clock: 1067MHz (0.9ns)
        *-bank:1
             description: SODIMM Synchronous 1067 MHz (0.9 ns)
             product: 0x31364A53463235363634485A2D3147314631
             vendor: 0x802C
             physical id: 1
             serial:
             slot: DIMM0
             size: 2GiB
             clock: 1067MHz (0.9ns)
     *-firmware
          description: BIOS
          vendor: Apple Inc.
          physical id: e
          version: MBP55.88Z.00AC.B03.0906151708 (06/15/09)
          size: 1MiB
          capacity: 4032KiB
          capabilities: pci upgrade shadowing cdboot bootselect acpi ieee1394boot smartbattery netboot
     *-pci
          description: Host bridge
          product: MCP79 Host Bridge
          vendor: nVidia Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: b1
          width: 32 bits
          clock: 66MHz
        *-memory:0 UNCLAIMED
             description: RAM memory
             product: MCP79 Memory Controller
             vendor: nVidia Corporation
             physical id: 0.1
             bus info: pci@0000:00:00.1
             version: b1
             width: 32 bits
             clock: 66MHz (15.2ns)
             capabilities: bus_master
             configuration: latency=0
        *-isa
             description: ISA bridge
             product: MCP79 LPC Bridge
             vendor: nVidia Corporation
             physical id: 3
             bus info: pci@0000:00:03.0
             version: b3
             width: 32 bits
             clock: 66MHz
             capabilities: isa bus_master
             configuration: latency=0
             resources: ioport:2000(size=256)
        *-memory:1 UNCLAIMED
             description: RAM memory
             product: MCP79 Memory Controller
             vendor: nVidia Corporation
             physical id: 3.1
             bus info: pci@0000:00:03.1
             version: b1
             width: 32 bits
             clock: 66MHz (15.2ns)
             configuration: latency=0
        *-serial
             description: SMBus
             product: MCP79 SMBus
             vendor: nVidia Corporation
             physical id: 3.2
             bus info: pci@0000:00:03.2
             version: b1
             width: 32 bits
             clock: 66MHz
             capabilities: pm cap_list
             configuration: driver=nForce2_smbus latency=0
             resources: irq:15 ioport:2180(size=64) ioport:2140(size=64) ioport:2100(size=64)
        *-memory:2 UNCLAIMED
             description: RAM memory
             product: MCP79 Memory Controller
             vendor: nVidia Corporation
             physical id: 3.3
             bus info: pci@0000:00:03.3
             version: b1
             width: 32 bits
             clock: 66MHz (15.2ns)
             configuration: latency=0
        *-memory:3 UNCLAIMED
             description: RAM memory
             product: nVidia Corporation
             vendor: nVidia Corporation
             physical id: 3.4
             bus info: pci@0000:00:03.4
             version: b1
             width: 32 bits
             clock: 66MHz (15.2ns)
             configuration: latency=0
        *-processor UNCLAIMED
             description: Co-processor
             product: MCP79 Co-processor
             vendor: nVidia Corporation
             physical id: 3.5
             bus info: pci@0000:00:03.5
             version: b1
             width: 32 bits
             clock: 66MHz
             capabilities: bus_master
             configuration: latency=0 maxlatency=1 mingnt=3
             resources: memory:d3400000-d347ffff
        *-usb:0
             description: USB Controller
             product: MCP79 OHCI USB 1.1 Controller
             vendor: nVidia Corporation
             physical id: 4
             bus info: pci@0000:00:04.0
             version: b1
             width: 32 bits
             clock: 66MHz
             capabilities: pm ohci bus_master cap_list
             configuration: driver=ohci_hcd latency=0 maxlatency=1 mingnt=3
             resources: irq:18 memory:d3488000-d3488fff
        *-usb:1
             description: USB Controller
             product: MCP79 EHCI USB 2.0 Controller
             vendor: nVidia Corporation
             physical id: 4.1
             bus info: pci@0000:00:04.1
             version: b1
             width: 32 bits
             clock: 66MHz
             capabilities: debug pm ehci bus_master cap_list
             configuration: driver=ehci_hcd latency=0 maxlatency=1 mingnt=3
             resources: irq:20 memory:d3489200-d34892ff
        *-usb:2
             description: USB Controller
             product: MCP79 OHCI USB 1.1 Controller
             vendor: nVidia Corporation
             physical id: 6
             bus info: pci@0000:00:06.0
             version: b1
             width: 32 bits
             clock: 66MHz
             capabilities: pm ohci bus_master cap_list
             configuration: driver=ohci_hcd latency=0 maxlatency=1 mingnt=3
             resources: irq:16 memory:d3487000-d3487fff
        *-usb:3
             description: USB Controller
             product: MCP79 EHCI USB 2.0 Controller
             vendor: nVidia Corporation
             physical id: 6.1
             bus info: pci@0000:00:06.1
             version: b1
             width: 32 bits
             clock: 66MHz
             capabilities: debug pm ehci bus_master cap_list
             configuration: driver=ehci_hcd latency=0 maxlatency=1 mingnt=3
             resources: irq:19 memory:d3489100-d34891ff
        *-multimedia
             description: Audio device
             product: MCP79 High Definition Audio
             vendor: nVidia Corporation
             physical id: 8
             bus info: pci@0000:00:08.0
             version: b1
             width: 32 bits
             clock: 66MHz
             capabilities: pm bus_master cap_list
             configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2
             resources: irq:21 memory:d3480000-d3483fff
        *-pci:0
             description: PCI bridge
             product: MCP79 PCI Bridge
             vendor: nVidia Corporation
             physical id: 9
             bus info: pci@0000:00:09.0
             version: b1
             width: 32 bits
             clock: 66MHz
             capabilities: pci subtractive_decode bus_master cap_list
             resources: memory:d3300000-d33fffff
        *-network
             description: Ethernet interface
             product: MCP79 Ethernet
             vendor: nVidia Corporation
             physical id: a
             bus info: pci@0000:00:0a.0
             logical name: eth0
             version: b1
             serial:
             capacity: 1GB/s
             width: 32 bits
             clock: 66MHz
             capabilities: pm msi bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
             configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 latency=0 link=no maxlatency=20 mingnt=1 multicast=yes port=MII
             resources: irq:27 memory:d3486000-d3486fff ioport:21e0(size=8) memory:d3489000-d34890ff memory:d3489300-d348930f
        *-ide
             description: IDE interface
             product: MCP79 SATA Controller
             vendor: nVidia Corporation
             physical id: b
             bus info: pci@0000:00:0b.0
             logical name: scsi0
             logical name: scsi1
             version: b1
             width: 32 bits
             clock: 66MHz
             capabilities: ide pm msi bus_master cap_list emulated
             configuration: driver=ahci latency=0 maxlatency=1 mingnt=3
             resources: irq:26 ioport:21d8(size=8) ioport:21ec(size=4) ioport:21d0(size=8) ioport:21e8(size=4) ioport:21c0(size=16) memory:d3484000-d3485fff
           *-disk
                description: ATA Disk
                product: TOSHIBA MK2555GS
                vendor: Toshiba
                physical id: 0
                bus info: scsi@0:0.0.0
                logical name: /dev/sda
                version: FH10
                serial:
                size: 232GiB (250GB)
                capabilities: partitioned partitioned:dos
                configuration: ansiversion=5
              *-volume:0 UNCLAIMED
                   description: EFI GPT partition
                   physical id: 1
                   bus info: scsi@0:0.0.0,1
                   capacity: 200MiB
                   capabilities: primary nofs
              *-volume:1
                   description: Darwin/OS X HFS+ partition
                   vendor: Mac OS X (journaled)
                   physical id: 2
                   bus info: scsi@0:0.0.0,2
                   logical name: /dev/sda2
                   logical name: /mnt/osx
                   version: 4
                   serial:
                   size: 111GiB
                   capacity: 111GiB
                   capabilities: primary journaled bootable osx hfsplus initialized
                   configuration: boot=osx checked=2009-06-25 14:34:32 created=2009-06-25 11:34:32 filesystem=hfsplus lastmountedby=HFSJ modified=2009-11-27 22:27:46 mount.fstype=hfsplus mount.options=ro,nosuid,nodev,noexec,relatime,umask=22,uid=0,gid=0,nls=utf8 state=mounted
              *-volume:2
                   description: Linux swap volume
                   physical id: 3
                   bus info: scsi@0:0.0.0,3
                   logical name: /dev/sda3
                   version: 1
                   size: 3814MiB
                   capacity: 3814MiB
                   capabilities: primary nofs swap initialized
                   configuration: filesystem=swap pagesize=4096
              *-volume:3
                   description: EXT3 volume
                   vendor: Linux
                   physical id: 4
                   bus info: scsi@0:0.0.0,4
                   logical name: /dev/sda4
                   logical name: /
                   version: 1.0
                   serial:
                   size: 117GiB
                   capacity: 117GiB
                   capabilities: primary bootable journaled extended_attributes large_files recover ext3 ext2 initialized
                   configuration: created=2009-09-16 05:05:33 filesystem=ext3 modified=2009-11-23 10:03:39 mount.fstype=ext3 mount.options=rw,relatime,errors=remount-ro,commit=600,data=ordered mounted=2009-11-27 22:28:26 state=mounted
           *-cdrom
                description: DVD writer
                product: DVD RW AD-5960S
                vendor: OPTIARC
                physical id: 1
                bus info: scsi@1:0.0.0
                logical name: /dev/cdrom
                logical name: /dev/cdrw
                logical name: /dev/dvd
                logical name: /dev/dvdrw
                logical name: /dev/scd0
                logical name: /dev/sr0
                version: 2AP5
                capabilities: removable audio cd-r cd-rw dvd dvd-r
                configuration: ansiversion=5 status=open
        *-pci:1
             description: PCI bridge
             product: MCP79 PCI Express Bridge
             vendor: nVidia Corporation
             physical id: 10
             bus info: pci@0000:00:10.0
             version: b1
             width: 32 bits
             clock: 33MHz
             capabilities: pci pm msi normal_decode bus_master cap_list
             resources: ioport:1000(size=4096) memory:d2000000-d30fffff ioport:c0000000(size=301989888)
           *-display
                description: VGA compatible controller
                product: C79 [GeForce 9400M]
                vendor: nVidia Corporation
                physical id: 0
                bus info: pci@0000:02:00.0
                version: b1
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi vga_controller bus_master cap_list rom
                configuration: driver=nvidia latency=0
                resources: irq:22 memory:d2000000-d2ffffff memory:c0000000-cfffffff(prefetchable) memory:d0000000-d1ffffff(prefetchable) ioport:1000(size=128) memory:d3000000-d301ffff(prefetchable)
        *-pci:2
             description: PCI bridge
             product: MCP79 PCI Express Bridge
             vendor: nVidia Corporation
             physical id: 15
             bus info: pci@0000:00:15.0
             version: b1
             width: 32 bits
             clock: 33MHz
             capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:24 memory:d3200000-d32fffff
           *-network
                description: Wireless interface
                product: BCM4322 802.11a/b/g/n Wireless LAN Controller
                vendor: Broadcom Corporation
                physical id: 0
                bus info: pci@0000:03:00.0
                logical name: eth2
                version: 01
                serial:
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
                configuration: broadcast=yes driver=wl0 driverversion=5.10.91.9 ip=192.168.1.192 latency=0 multicast=yes wireless=IEEE 802.11abgn
                resources: irq:23 memory:d3200000-d3203fff
        *-pci:3
             description: PCI bridge
             product: MCP79 PCI Express Bridge
             vendor: nVidia Corporation
             physical id: 16
             bus info: pci@0000:00:16.0
             version: b1
             width: 32 bits
             clock: 33MHz
             capabilities: pci pm msi pciexpress normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:25 memory:d3100000-d31fffff
           *-firewire
                description: FireWire (IEEE 1394)
                product: FW643 PCI Express1394b Controller (PHY/Link)
                vendor: Agere Systems
                physical id: 0
                bus info: pci@0000:04:00.0
                version: 07
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress ohci bus_master cap_list
                configuration: driver=firewire_ohci latency=0
                resources: irq:22 memory:d3100000-d3100fff
     *-scsi
          physical id: 2
          bus info: usb@2:5
          logical name: scsi6
          capabilities: emulated
        *-disk
             description: SCSI Disk
             product: SD Card Reader
             vendor: APPLE
             physical id: 0.0.0
             bus info: scsi@6:0.0.0
             logical name: /dev/sdb
             version: 1.00
             capabilities: removable
           *-medium
                physical id: 0
                logical name: /dev/sdb
  *-battery
       product: Unknown
       vendor: Unknown
       physical id: 1
       version: Unknown
       serial: Unknown
       slot: Unknown

dmidecode:

Code:

Code:

# dmidecode 2.9
SMBIOS 2.4 present.
42 structures occupying 2094 bytes.
Table at 0x000E0000.

Handle 0x0000, DMI type 4, 35 bytes
Processor Information
	Socket Designation: U2E1
	Type: Central Processor
	Family: Other
	Manufacturer: Intel(R) Corporation
	ID: 7A 06 01 00 FF FB EB BF
	Version: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz
	Voltage: 1.6 V
	External Clock: 266 MHz
	Max Speed: 2530 MHz
	Current Speed: 2530 MHz
	Status: Populated, Enabled
	Upgrade: ZIF Socket
	L1 Cache Handle: 0x0002
	L2 Cache Handle: Not Provided
	L3 Cache Handle: Not Provided
	Serial Number: Not Specified
	Asset Tag: Unknown
	Part Number: Not Specified

Handle 0x0001, DMI type 7, 19 bytes
Cache Information
	Socket Designation: Unknown
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 32 KB
	Maximum Size: 32 KB
	Supported SRAM Types:
		Asynchronous
	Installed SRAM Type: Asynchronous
	Speed: Unknown
	Error Correction Type: Single-bit ECC
	System Type: Instruction
	Associativity: 8-way Set-associative

Handle 0x0002, DMI type 7, 19 bytes
Cache Information
	Socket Designation: Unknown
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 32 KB
	Maximum Size: 32 KB
	Supported SRAM Types:
		Asynchronous
	Installed SRAM Type: Asynchronous
	Speed: Unknown
	Error Correction Type: Single-bit ECC
	System Type: Data
	Associativity: 8-way Set-associative

Handle 0x0003, DMI type 4, 35 bytes
Processor Information
	Socket Designation: U2E1
	Type: Central Processor
	Family: Other
	Manufacturer: Intel(R) Corporation
	ID: 7A 06 01 00 FF FB EB BF
	Version: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz
	Voltage: 1.6 V
	External Clock: 266 MHz
	Max Speed: 2530 MHz
	Current Speed: 2530 MHz
	Status: Populated, Enabled
	Upgrade: ZIF Socket
	L1 Cache Handle: 0x0005
	L2 Cache Handle: Not Provided
	L3 Cache Handle: Not Provided
	Serial Number: Not Specified
	Asset Tag: Unknown
	Part Number: Not Specified

Handle 0x0004, DMI type 7, 19 bytes
Cache Information
	Socket Designation: Unknown
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 32 KB
	Maximum Size: 32 KB
	Supported SRAM Types:
		Asynchronous
	Installed SRAM Type: Asynchronous
	Speed: Unknown
	Error Correction Type: Single-bit ECC
	System Type: Instruction
	Associativity: 8-way Set-associative

Handle 0x0005, DMI type 7, 19 bytes
Cache Information
	Socket Designation: Unknown
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 32 KB
	Maximum Size: 32 KB
	Supported SRAM Types:
		Asynchronous
	Installed SRAM Type: Asynchronous
	Speed: Unknown
	Error Correction Type: Single-bit ECC
	System Type: Data
	Associativity: 8-way Set-associative

Handle 0x0006, DMI type 16, 15 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: System Memory
	Error Correction Type: None
	Maximum Capacity: 32 GB
	Error Information Handle: Not Provided
	Number Of Devices: 2

Handle 0x0007, DMI type 19, 15 bytes
Memory Array Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x000FFFFFFFF
	Range Size: 4 GB
	Physical Array Handle: 0x0006
	Partition Width: 0

Handle 0x0008, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0006
	Error Information Handle: No Error
	Total Width: Unknown
	Data Width: 65508 bits
	Size: 2048 MB
	Form Factor: SODIMM
	Set: None
	Locator: DIMM0
	Bank Locator: BANK 0
	Type: <OUT OF SPEC>
	Type Detail: Synchronous
	Speed: 1067 MHz (0.9 ns)
	Manufacturer: 0x802C
	Serial Number:
	Asset Tag: Unknown
	Part Number: 0x31364A53463235363634485A2D3147314631

Handle 0x0009, DMI type 130, 186 bytes
OEM-specific Type
	Header and Data:
		82 BA 09 00 08 00 00 00 B0 00 92 10 0B 03 02 11
		00 09 03 52 01 08 0F 00 1C 00 69 78 69 3C 69 11
		2C 95 70 03 3C 3C 01 2C 82 05 80 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 0F 11 05 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80
		2C 08 09 16 DC 4A 6F 60 16 D8 31 36 4A 53 46 32
		35 36 36 34 48 5A 2D 31 47 31 46 31 46 31 80 2C
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00

Handle 0x000A, DMI type 17, 27 bytes
Memory Device
	Array Handle: 0x0006
	Error Information Handle: No Error
	Total Width: Unknown
	Data Width: 65508 bits
	Size: 2048 MB
	Form Factor: SODIMM
	Set: None
	Locator: DIMM0
	Bank Locator: BANK 1
	Type: <OUT OF SPEC>

	Type Detail: Synchronous
	Speed: 1067 MHz (0.9 ns)
	Manufacturer: 0x802C
	Serial Number:
	Asset Tag: Unknown
	Part Number: 0x31364A53463235363634485A2D3147314631

Handle 0x000B, DMI type 130, 186 bytes
OEM-specific Type
	Header and Data:
		82 BA 0B 00 0A 00 00 00 B0 00 92 10 0B 03 02 11
		00 09 03 52 01 08 0F 00 1C 00 69 78 69 3C 69 11
		2C 95 70 03 3C 3C 01 2C 82 05 80 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 0F 11 05 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80
		2C 08 09 16 DC 4A 6F 3F 16 D8 31 36 4A 53 46 32
		35 36 36 34 48 5A 2D 31 47 31 46 31 46 31 80 2C
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00

Handle 0x000C, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x000FFFFFFFF
	Range Size: 4 GB
	Physical Device Handle: 0x0008
	Memory Array Mapped Address Handle: 0x0007
	Partition Row Position: Unknown
	Interleave Position: 1
	Interleaved Data Depth: 1

Handle 0x000D, DMI type 20, 19 bytes
Memory Device Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x000FFFFFFFF
	Range Size: 4 GB
	Physical Device Handle: 0x000A
	Memory Array Mapped Address Handle: 0x0007
	Partition Row Position: Unknown
	Interleave Position: 2
	Interleaved Data Depth: 1

Handle 0x000E, DMI type 0, 24 bytes
BIOS Information
	Vendor: Apple Inc.
	Version:    MBP55.88Z.00AC.B03.0906151708
	Release Date: 06/15/09
	ROM Size: 4096 kB
	Characteristics:
		PCI is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		Boot from CD is supported
		Selectable boot is supported
		ACPI is supported
		IEEE 1394 boot is supported
		Smart battery is supported
		Function key-initiated network boot is supported
	BIOS Revision: 0.1

Handle 0x000F, DMI type 1, 27 bytes
System Information
	Manufacturer: Apple Inc.
	Product Name: MacBookPro5,5
	Version: 1.0
	Serial Number:
	UUID:
	Wake-up Type: Power Switch
	SKU Number: System SKU#
	Family: MacBook

Handle 0x0010, DMI type 2, 16 bytes
Base Board Information
	Manufacturer: Apple Inc.
	Product Name: Mac-F2268AC8
	Version: Not Specified
	Serial Number: Base Board Serial#
	Asset Tag: Base Board Asset Tag#
	Features:
		Board is a hosting board
		Board is replaceable
	Location In Chassis: Part Component
	Chassis Handle: 0x0011
	Type: Motherboard
	Contained Object Handles: 0

Handle 0x0011, DMI type 3, 21 bytes
Chassis Information
	Manufacturer: Apple Inc.
	Type: Notebook
	Lock: Not Present
	Version: Mac-F2268AC8
	Serial Number:
	Asset Tag: Asset Tag#
	Boot-up State: Safe
	Power Supply State: Safe
	Thermal State: Other
	Security Status: Other
	OEM Information: 0x00000000
	Height: Unspecified
	Number Of Power Cords: Unspecified
	Contained Elements: 0

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: None
	Internal Connector Type: None
	External Reference Designator: FireWire 800
	External Connector Type: IEEE 1394
	Port Type: Firewire (IEEE P1394)

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: None
	Internal Connector Type: None
	External Reference Designator: Ethernet
	External Connector Type: RJ-45
	Port Type: Network Port

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: None
	Internal Connector Type: None
	External Reference Designator: USB0
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: None
	Internal Connector Type: None
	External Reference Designator: USB1
	External Connector Type: Access Bus (USB)
	Port Type: USB

Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: None
	Internal Connector Type: Other
	External Reference Designator: Mini DisplayPort
	External Connector Type: None
	Port Type: Other

Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: None
	Internal Connector Type: Other
	External Reference Designator: Microphone
	External Connector Type: None
	Port Type: Other

Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: None
	Internal Connector Type: Other
	External Reference Designator: Speaker
	External Connector Type: None
	Port Type: Other

Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: None
	Internal Connector Type: None
	External Reference Designator: Audio Line In
	External Connector Type: Mini Jack (headphones)
	Port Type: Audio Port

Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: None
	Internal Connector Type: None
	External Reference Designator: Audio Line Out
	External Connector Type: Mini Jack (headphones)
	Port Type: Audio Port

Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: None
	Internal Connector Type: None
	External Reference Designator: MagSafe DC Power
	External Connector Type: Other
	Port Type: Other

Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA Port A
	Internal Connector Type: On Board IDE
	External Reference Designator: None
	External Connector Type: None
	Port Type: Other

Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
	Internal Reference Designator: SATA Port B
	Internal Connector Type: On Board IDE
	External Reference Designator: None
	External Connector Type: None
	Port Type: Other

Handle 0x001E, DMI type 9, 13 bytes
System Slot Information
	Designation: AirPort
	Type: x1 PCI Express
	Current Usage: Available
	Length: Short
	ID: 3
	Characteristics:
		3.3 V is provided
		Hot-plug devices are supported
		SMBus signal is supported

Handle 0x001F, DMI type 10, 6 bytes
On Board Device Information
	Type: Video
	Status: Enabled
	Description: Nvidia G84 Video

Handle 0x0020, DMI type 10, 6 bytes
On Board Device Information
	Type: Sound
	Status: Enabled
	Description: Azalia Audio Codec

Handle 0x0021, DMI type 10, 6 bytes
On Board Device Information
	Type: Ethernet
	Status: Enabled
	Description: Yukon Ultra Ethernet Controller

Handle 0x0022, DMI type 10, 6 bytes
On Board Device Information
	Type: Other
	Status: Enabled
	Description: Sata

Handle 0x0123, DMI type 12, 5 bytes
System Configuration Options

Handle 0x0124, DMI type 13, 22 bytes
BIOS Language Information
	Installable Languages: 1
		<BAD INDEX>
	Currently Installed Language: Not Specified

Handle 0x0125, DMI type 22, 32 bytes
Portable Battery
	Location: Unknown
	Manufacturer: Unknown
	Manufacture Date: Unknown
	Serial Number: Unknown
	Name: Unknown
	Design Capacity: Unknown
	Design Voltage: Unknown
	SBDS Version: Unknown
	Maximum Error: Unknown
	SBDS Chemistry: Unknown
	OEM-specific Information: 0x00000000

Handle 0x0126, DMI type 32, 20 bytes
System Boot Information
	Status: No errors detected

Handle 0x0127, DMI type 131, 6 bytes
OEM-specific Type
	Header and Data:
		83 06 27 01 01 03

Handle 0x0128, DMI type 128, 88 bytes
OEM-specific Type
	Header and Data:
		80 58 28 01 03 00 00 00 03 14 00 C0 FF 7F 00 C0
		01 02 03 00 00 00 00 00 00 00 C0 FF FF FF C3 FF
		00 40 CB FF FF BF FF FF 00 00 C8 FF FF 3F CA FF
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
		00 00 00 00 00 00 00 00

Handle 0xFFFD, DMI type 127, 4 bytes
End Of Table

lsmod:

Code:

Code:

Module                  Size  Used by
ppdev                   5014  0
lp                      7446  0
parport                27538  2 ppdev,lp
sco                     7161  2
bridge                 39054  0
stp                     1440  1 bridge
bnep                    9139  2
rfcomm                 29133  8
l2cap                  24624  16 bnep,rfcomm
acpi_cpufreq            6751  0
cpufreq_stats           2659  0
cpufreq_powersave        998  0
cpufreq_userspace       2408  0
cpufreq_conservative     5162  0
binfmt_misc             6303  1
uinput                  6344  1
fuse                   49262  1
nls_utf8                1208  1
hfsplus                65433  1
ext4                  281631  0
jbd2                   65772  1 ext4
crc16                   1319  2 l2cap,ext4
nvidia_bl               4179  0
lib80211_crypt_tkip     7269  0
wl                   1256906  0
lib80211                3526  2 lib80211_crypt_tkip,wl
sbp2                   16667  0
ieee1394               61644  1 sbp2
loop                   11463  0
snd_hda_codec_cirrus     8215  1
snd_hda_intel          18131  1
snd_hda_codec          53780  2 snd_hda_codec_cirrus,snd_hda_intel
snd_hwdep               5140  1 snd_hda_codec
snd_pcm_oss            31967  0
snd_mixer_oss          12366  1 snd_pcm_oss
snd_pcm                59655  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi            4048  0
snd_rawmidi            14987  1 snd_seq_midi
snd_seq_midi_event      4628  1 snd_seq_midi
snd_seq                40673  2 snd_seq_midi,snd_seq_midi_event
snd_timer              15390  2 snd_pcm,snd_seq
snd_seq_device          4477  3 snd_seq_midi,snd_rawmidi,snd_seq
applesmc               20906  0
uvcvideo               51647  0
videodev               29593  1 uvcvideo
snd                    43854  13 snd_hda_codec_cirrus,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
led_class               2401  1 applesmc
soundcore               4566  1 snd
v4l1_compat            11138  2 uvcvideo,videodev
shpchp                 25864  0
joydev                  8347  0
processor              29335  3 acpi_cpufreq
evdev                   7240  24
pcspkr                  1699  0
i2c_nforce2             5264  0
v4l2_compat_ioctl32     7946  1 videodev
snd_page_alloc          6009  2 snd_hda_intel,snd_pcm
hid_apple               4210  0
input_polldev           1951  1 applesmc
btusb                   9721  0
bcm5974                 6585  0
pci_hotplug            21171  1 shpchp
usbhid                 30748  0
ac                      2176  0
battery                 4982  0
hid                    62489  2 hid_apple,usbhid
bluetooth              41411  7 sco,bnep,rfcomm,l2cap,btusb
rfkill                 12820  1 bluetooth
ext3                  104984  1
jbd                    36042  1 ext3
mbcache                 4970  2 ext4,ext3
usb_storage            38169  0
sg                     18296  3
sd_mod                 29273  4
sr_mod                 12346  0
cdrom                  28535  1 sr_mod
crc_t10dif              1276  1 sd_mod
ata_generic             2983  0
ahci                   31366  5
libata                130503  2 ata_generic,ahci
ohci_hcd               18940  0
firewire_ohci          19308  0
firewire_core          35952  1 firewire_ohci
crc_itu_t               1307  1 firewire_core
scsi_mod              120838  6 sbp2,usb_storage,sg,sd_mod,sr_mod,libata
ide_pci_generic         2788  0
nvidia               9495413  30
i2c_core               15008  3 videodev,i2c_nforce2,nvidia
ide_core               75698  1 ide_pci_generic
ehci_hcd               29682  0
forcedeth              45256  0
button                  4618  0
thermal                11594  0
fan                     3346  0
thermal_sys            11878  3 processor,thermal,fan

dmesg:

Code:

Code:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-rc8 (root@mbp) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Nov 22 04:26:54 EST 2009
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc8 root=UUID= ro
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000ae72b000 (usable)
[    0.000000]  BIOS-e820: 00000000ae72b000 - 00000000ae92c000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000ae92c000 - 00000000af000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000af000000 - 00000000bf000000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf000000 - 00000000bf0c3000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bf0c3000 - 00000000bf0c5000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf0c5000 - 00000000bf0c7000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bf0c7000 - 00000000bf0c9000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf0c9000 - 00000000bfec5000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bfec5000 - 00000000bfec7000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfec7000 - 00000000bfec8000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bfec8000 - 00000000bfeca000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfeca000 - 00000000bfecd000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bfecd000 - 00000000bfedf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bfedf000 - 00000000bfef9000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved)
[    0.000000]  BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000d3400000 - 00000000d3401000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 disabled
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 100000000 mask FC0000000 write-back
[    0.000000]   4 base 0BFF00000 mask FFFF00000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xae72b max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000ae72b000
[    0.000000]  0000000000 - 00ae600000 page 2M
[    0.000000]  00ae600000 - 00ae72b000 page 4k
[    0.000000] kernel direct mapping tables up to ae72b000 @ 8000-d000
[    0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[    0.000000]  0100000000 - 0140000000 page 2M
[    0.000000] kernel direct mapping tables up to 140000000 @ b000-11000
[    0.000000] RAMDISK: 373ec000 - 37fef3c9
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
[    0.000000] ACPI: XSDT 00000000bfeee1c0 0007C (v01 APPLE   Apple00 000000AC      01000013)
[    0.000000] ACPI: FACP 00000000bfeec000 000F4 (v04 APPLE   Apple00 000000AC Loki 0000005F)
[    0.000000] ACPI: DSDT 00000000bfedf000 05B9E (v01 APPLE  MacBookP 00050005 INTL 20061109)
[    0.000000] ACPI: FACS 00000000bfecd000 00040
[    0.000000] ACPI: HPET 00000000bfeeb000 00038 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: APIC 00000000bfeea000 00068 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: APIC 00000000bfee9000 00068 (v02 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: MCFG 00000000bfee8000 0003C (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: ASF! 00000000bfee7000 000A5 (v32 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: SBST 00000000bfee6000 00030 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: ECDT 00000000bfee5000 00053 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: SSDT 00000000bfec7000 004DC (v01  APPLE    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000bfecc000 000A5 (v01 SataRe  SataPri 00001000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000bfecb000 0009F (v01 SataRe  SataSec 00001000 INTL 20061109)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify [email][email protected][/email]
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000140000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[    0.000000]   NODE_DATA [000000000000c000 - 0000000000013fff]
[    0.000000]   bootmap [0000000000014000 -  000000000003bfff] pages 28
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 00015ef254]    TEXT DATA BSS ==> [0001000000 - 00015ef254]
[    0.000000]   #3 [00373ec000 - 0037fef3c9]          RAMDISK ==> [00373ec000 - 0037fef3c9]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [00015f0000 - 00015f0201]              BRK ==> [00015f0000 - 00015f0201]
[    0.000000]   #6 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
[    0.000000]   #7 [000000b000 - 000000c000]          PGTABLE ==> [000000b000 - 000000c000]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bbfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00140000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000ae72b
[    0.000000]     0: 0x00100000 -> 0x00140000
[    0.000000] On node 0 totalpages: 976586
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 103 pages reserved
[    0.000000]   DMA zone: 3840 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 696163 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 258560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000ae72b000 - 00000000ae92c000
[    0.000000] PM: Registered nosave memory: 00000000ae92c000 - 00000000af000000
[    0.000000] PM: Registered nosave memory: 00000000af000000 - 00000000bf000000
[    0.000000] PM: Registered nosave memory: 00000000bf000000 - 00000000bf0c3000
[    0.000000] PM: Registered nosave memory: 00000000bf0c3000 - 00000000bf0c5000
[    0.000000] PM: Registered nosave memory: 00000000bf0c5000 - 00000000bf0c7000
[    0.000000] PM: Registered nosave memory: 00000000bf0c7000 - 00000000bf0c9000
[    0.000000] PM: Registered nosave memory: 00000000bf0c9000 - 00000000bfec5000
[    0.000000] PM: Registered nosave memory: 00000000bfec5000 - 00000000bfec7000
[    0.000000] PM: Registered nosave memory: 00000000bfec7000 - 00000000bfec8000
[    0.000000] PM: Registered nosave memory: 00000000bfec8000 - 00000000bfeca000
[    0.000000] PM: Registered nosave memory: 00000000bfeca000 - 00000000bfecd000
[    0.000000] PM: Registered nosave memory: 00000000bfecd000 - 00000000bfedf000
[    0.000000] PM: Registered nosave memory: 00000000bfedf000 - 00000000bfef9000
[    0.000000] PM: Registered nosave memory: 00000000bfef9000 - 00000000bfeff000
[    0.000000] PM: Registered nosave memory: 00000000bfeff000 - 00000000bff00000
[    0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000d3400000
[    0.000000] PM: Registered nosave memory: 00000000d3400000 - 00000000d3401000
[    0.000000] PM: Registered nosave memory: 00000000d3401000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[    0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
[    0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d3401000 (gap: d3401000:1cbff000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff880028200000 s80792 r8192 d21608 u1048576
[    0.000000] pcpu-alloc: s80792 r8192 d21608 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 958563
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc8 root=UUID= ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
[    0.000000] software IO TLB at phys 0x20000000 - 0x24000000
[    0.000000] Memory: 3766216k/5242880k available (2982k kernel code, 1336536k absent, 140128k reserved, 1533k data, 660k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:424
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] kmemleak: Early log buffer exceeded, please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2520.885 MHz processor.
[    0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5041.77 BogoMIPS (lpj=10083540)
[    0.004188] Security Framework initialized
[    0.004250] SELinux:  Disabled at boot.
[    0.004582] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.008603] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.009653] Mount-cache hash table entries: 256
[    0.009847] Initializing cgroup subsys ns
[    0.009908] Initializing cgroup subsys cpuacct
[    0.009968] Initializing cgroup subsys devices
[    0.010027] Initializing cgroup subsys freezer
[    0.010085] Initializing cgroup subsys net_cls
[    0.010172] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.010272] CPU: L2 cache: 3072K
[    0.010328] CPU 0/0x0 -> Node 0
[    0.010386] CPU: Physical Processor ID: 0
[    0.012009] CPU: Processor Core ID: 0
[    0.012067] mce: CPU supports 6 MCE banks
[    0.012129] CPU0: Thermal monitoring enabled (TM2)
[    0.012190] using mwait in idle threads.
[    0.012247] Performance Events: Core2 events, Intel PMU driver.
[    0.012397] ... version:                2
[    0.012454] ... bit width:              40
[    0.012512] ... generic registers:      2
[    0.012569] ... value mask:             000000ffffffffff
[    0.012628] ... max period:             000000007fffffff
[    0.012685] ... fixed-purpose events:   3
[    0.012741] ... event mask:             0000000700000003
[    0.013667] ACPI: Core revision 20090903
[    0.025192] Setting APIC routing to flat
[    0.025632] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.065384] CPU0: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz stepping 0a
[    0.068001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] Calibrating delay using timer specific routine.. 5041.35 BogoMIPS (lpj=10082702)
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.008000] CPU: L2 cache: 3072K
[    0.008000] CPU 1/0x1 -> Node 0
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.008000] CPU1: Thermal monitoring enabled (TM2)
[    0.152031] CPU1: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz stepping 0a
[    0.152649] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.156020] Brought up 2 CPUs
[    0.156078] Total of 2 processors activated (10083.12 BogoMIPS).
[    0.156684] CPU0 attaching sched-domain:
[    0.156687]  domain 0: span 0-1 level MC
[    0.156689]   groups: 0 1
[    0.156694] CPU1 attaching sched-domain:
[    0.156695]  domain 0: span 0-1 level MC
[    0.156697]   groups: 1 0
[    0.156763] Apple MacBookPro5 series board detected. Selecting PCI-method for reboots.
[    0.156763] regulator: core version 0.5
[    0.156763] NET: Registered protocol family 16
[    0.156763] ACPI: bus type pci registered
[    0.156763] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
[    0.156763] PCI: MCFG area at f0000000 reserved in E820
[    0.156763] PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[    0.161537] PCI: Using MMCONFIG at f0000000 - f3ffffff
[    0.161596] PCI: Using configuration type 1 for base access
[    0.161666] bio: create slab <bio-0> at 0
[    0.161666] ACPI: EC: EC description table is found, configuring boot EC
[    0.165793] ACPI: BIOS _OSI(Linux) query ignored
[    0.166362] ACPI: Interpreter enabled
[    0.166421] ACPI: (supports S0 S3 S4 S5)
[    0.166669] ACPI: Using IOAPIC for interrupt routing
[    0.184215] ACPI: EC: GPE = 0x3f, I/O: command/status = 0x66, data = 0x62
[    0.184284] ACPI: No dock devices found.
[    0.184596] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.184682] pci 0000:00:03.0: reg 10 io port: [0x2000-0x20ff]
[    0.184682] pci 0000:00:03.2: reg 10 io port: [0x2180-0x21bf]
[    0.184682] pci 0000:00:03.2: reg 20 io port: [0x2140-0x217f]
[    0.184682] pci 0000:00:03.2: reg 24 io port: [0x2100-0x213f]
[    0.184682] pci 0000:00:03.2: PME# supported from D3hot D3cold
[    0.184682] pci 0000:00:03.2: PME# disabled
[    0.184682] pci 0000:00:03.5: reg 10 32bit mmio: [0xd3400000-0xd347ffff]
[    0.184706] pci 0000:00:04.0: reg 10 32bit mmio: [0xd3488000-0xd3488fff]
[    0.184732] pci 0000:00:04.0: supports D1 D2
[    0.184733] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.184795] pci 0000:00:04.0: PME# disabled
[    0.184877] pci 0000:00:04.1: reg 10 32bit mmio: [0xd3489200-0xd34892ff]
[    0.184908] pci 0000:00:04.1: supports D1 D2
[    0.184909] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.184972] pci 0000:00:04.1: PME# disabled
[    0.185058] pci 0000:00:06.0: reg 10 32bit mmio: [0xd3487000-0xd3487fff]
[    0.185084] pci 0000:00:06.0: supports D1 D2
[    0.185085] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.185147] pci 0000:00:06.0: PME# disabled
[    0.185229] pci 0000:00:06.1: reg 10 32bit mmio: [0xd3489100-0xd34891ff]
[    0.185260] pci 0000:00:06.1: supports D1 D2
[    0.185261] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.185324] pci 0000:00:06.1: PME# disabled
[    0.185410] pci 0000:00:08.0: reg 10 32bit mmio: [0xd3480000-0xd3483fff]
[    0.185436] pci 0000:00:08.0: PME# supported from D3hot D3cold
[    0.185497] pci 0000:00:08.0: PME# disabled
[    0.185609] pci 0000:00:0a.0: reg 10 32bit mmio: [0xd3486000-0xd3486fff]
[    0.185613] pci 0000:00:0a.0: reg 14 io port: [0x21e0-0x21e7]
[    0.185617] pci 0000:00:0a.0: reg 18 32bit mmio: [0xd3489000-0xd34890ff]
[    0.185621] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xd3489300-0xd348930f]
[    0.185641] pci 0000:00:0a.0: supports D1 D2
[    0.185643] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.185706] pci 0000:00:0a.0: PME# disabled
[    0.185788] pci 0000:00:0b.0: reg 10 io port: [0x21d8-0x21df]
[    0.185792] pci 0000:00:0b.0: reg 14 io port: [0x21ec-0x21ef]
[    0.185795] pci 0000:00:0b.0: reg 18 io port: [0x21d0-0x21d7]
[    0.185799] pci 0000:00:0b.0: reg 1c io port: [0x21e8-0x21eb]
[    0.185803] pci 0000:00:0b.0: reg 20 io port: [0x21c0-0x21cf]
[    0.185806] pci 0000:00:0b.0: reg 24 32bit mmio: [0xd3484000-0xd3485fff]
[    0.185863] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.185924] pci 0000:00:10.0: PME# disabled
[    0.186199] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.186265] pci 0000:00:15.0: PME# disabled
[    0.186567] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.186632] pci 0000:00:16.0: PME# disabled
[    0.186769] pci 0000:00:09.0: transparent bridge
[    0.188005] pci 0000:00:09.0: bridge 32bit mmio: [0xd3300000-0xd33fffff]
[    0.188038] pci 0000:02:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff]
[    0.188046] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff]
[    0.188055] pci 0000:02:00.0: reg 1c 64bit mmio pref: [0xd0000000-0xd1ffffff]
[    0.188060] pci 0000:02:00.0: reg 24 io port: [0x1000-0x107f]
[    0.188065] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xd3000000-0xd301ffff]
[    0.188116] pci 0000:00:10.0: bridge io port: [0x1000-0x1fff]
[    0.188118] pci 0000:00:10.0: bridge 32bit mmio: [0xd2000000-0xd30fffff]
[    0.188122] pci 0000:00:10.0: bridge 64bit mmio pref: [0xc0000000-0xd1ffffff]
[    0.188328] pci 0000:03:00.0: reg 10 64bit mmio: [0xd3200000-0xd3203fff]
[    0.188381] pci 0000:03:00.0: supports D1 D2
[    0.188383] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.188446] pci 0000:03:00.0: PME# disabled
[    0.188572] pci 0000:00:15.0: bridge 32bit mmio: [0xd3200000-0xd32fffff]
[    0.188636] pci 0000:04:00.0: reg 10 64bit mmio: [0xd3100000-0xd3100fff]
[    0.188688] pci 0000:04:00.0: supports D1 D2
[    0.188690] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.188753] pci 0000:04:00.0: PME# disabled
[    0.188876] pci 0000:00:16.0: bridge 32bit mmio: [0xd3100000-0xd31fffff]
[    0.188922] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.189219] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[    0.244194] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
[    0.244912] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled.
[    0.245629] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
[    0.246345] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[    0.247066] ACPI: PCI Interrupt Link [Z003] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.248218] ACPI: PCI Interrupt Link [Z004] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.249022] ACPI: PCI Interrupt Link [Z005] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.249826] ACPI: PCI Interrupt Link [Z006] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.250631] ACPI: PCI Interrupt Link [Z007] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.251439] ACPI: PCI Interrupt Link [Z008] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.252220] ACPI: PCI Interrupt Link [Z009] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.253028] ACPI: PCI Interrupt Link [Z00A] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.253833] ACPI: PCI Interrupt Link [Z00B] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.254637] ACPI: PCI Interrupt Link [Z00C] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.255441] ACPI: PCI Interrupt Link [Z00D] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.256268] ACPI: PCI Interrupt Link [Z00E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.257072] ACPI: PCI Interrupt Link [Z00F] (IRQs 16 17 18 19 20 21 22 23) *10
[    0.257831] ACPI: PCI Interrupt Link [Z00G] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.258635] ACPI: PCI Interrupt Link [Z00H] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.259439] ACPI: PCI Interrupt Link [Z00I] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.260216] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *7
[    0.260969] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.261772] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.262575] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.263381] ACPI: PCI Interrupt Link [Z00N] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.264215] ACPI: PCI Interrupt Link [Z00O] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.265018] ACPI: PCI Interrupt Link [Z00P] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.265822] ACPI: PCI Interrupt Link [Z00Q] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.266625] ACPI: PCI Interrupt Link [Z00R] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.267430] ACPI: PCI Interrupt Link [Z00S] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.268269] ACPI: PCI Interrupt Link [Z00T] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.269076] ACPI: PCI Interrupt Link [Z00U] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.269881] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15
[    0.270639] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
[    0.271395] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10
[    0.272168] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *14
[    0.272926] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15
[    0.273689] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *11
[    0.274446] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.275250] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
[    0.276015] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.276820] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7
[    0.277578] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5
[    0.278331] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14
[    0.278937] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.278937] vgaarb: loaded
[    0.278937] usbcore: registered new interface driver usbfs
[    0.278937] usbcore: registered new interface driver hub
[    0.278937] usbcore: registered new device driver usb
[    0.278937] PCI: Using ACPI for IRQ routing
[    0.280037] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[    0.280317] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[    0.284008] Switching to clocksource tsc
[    0.285068] pnp: PnP ACPI init
[    0.285133] ACPI: bus type pnp registered
[    0.292003] pnp: PnP ACPI: found 8 devices
[    0.292061] ACPI: ACPI bus type pnp unregistered
[    0.292127] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[    0.292192] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[    0.292257] system 00:06: ioport range 0x400-0x47f has been reserved
[    0.292317] system 00:06: ioport range 0x480-0x4ff has been reserved
[    0.292378] system 00:06: ioport range 0x500-0x57f has been reserved
[    0.292439] system 00:06: ioport range 0x580-0x5ff has been reserved
[    0.299722] system 00:06: ioport range 0x800-0x87f has been reserved
[    0.299783] system 00:06: ioport range 0x880-0x8ff has been reserved
[    0.299844] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[    0.299907] system 00:06: ioport range 0x295-0x296 has been reserved
[    0.304864] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[    0.304924] pci 0000:00:09.0:   IO window: disabled
[    0.304985] pci 0000:00:09.0:   MEM window: 0xd3300000-0xd33fffff
[    0.305046] pci 0000:00:09.0:   PREFETCH window: disabled
[    0.305107] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02
[    0.305167] pci 0000:00:10.0:   IO window: 0x1000-0x1fff
[    0.305228] pci 0000:00:10.0:   MEM window: 0xd2000000-0xd30fffff
[    0.305289] pci 0000:00:10.0:   PREFETCH window: 0x000000c0000000-0x000000d1ffffff
[    0.305361] pci 0000:00:15.0: PCI bridge, secondary bus 0000:03
[    0.305421] pci 0000:00:15.0:   IO window: disabled
[    0.305484] pci 0000:00:15.0:   MEM window: 0xd3200000-0xd32fffff
[    0.305549] pci 0000:00:15.0:   PREFETCH window: disabled
[    0.305614] pci 0000:00:16.0: PCI bridge, secondary bus 0000:04
[    0.305673] pci 0000:00:16.0:   IO window: disabled
[    0.305740] pci 0000:00:16.0:   MEM window: 0xd3100000-0xd31fffff
[    0.305805] pci 0000:00:16.0:   PREFETCH window: disabled
[    0.305872] pci 0000:00:09.0: enabling device (0000 -> 0002)
[    0.305935] pci 0000:00:09.0: setting latency timer to 64
[    0.305941] pci 0000:00:10.0: setting latency timer to 64
[    0.306271] ACPI: PCI Interrupt Link [Z00F] enabled at IRQ 23
[    0.306333]   alloc irq_desc for 23 on node -1
[    0.306335]   alloc kstat_irqs on node -1
[    0.306340] pci 0000:00:15.0: PCI INT A -> Link[Z00F] -> GSI 23 (level, low) -> IRQ 23
[    0.306417] pci 0000:00:15.0: setting latency timer to 64
[    0.306743] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 22
[    0.306803]   alloc irq_desc for 22 on node -1
[    0.306805]   alloc kstat_irqs on node -1
[    0.306808] pci 0000:00:16.0: PCI INT A -> Link[Z00J] -> GSI 22 (level, low) -> IRQ 22
[    0.306885] pci 0000:00:16.0: setting latency timer to 64
[    0.306890] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.306892] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.306895] pci_bus 0000:01: resource 1 mem: [0xd3300000-0xd33fffff]
[    0.306896] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
[    0.306898] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.306900] pci_bus 0000:02: resource 0 io:  [0x1000-0x1fff]
[    0.306902] pci_bus 0000:02: resource 1 mem: [0xd2000000-0xd30fffff]
[    0.306904] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xd1ffffff]
[    0.306906] pci_bus 0000:03: resource 1 mem: [0xd3200000-0xd32fffff]
[    0.306908] pci_bus 0000:04: resource 1 mem: [0xd3100000-0xd31fffff]
[    0.306959] NET: Registered protocol family 2
[    0.307167] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.308287] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.312126] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.312672] TCP: Hash tables configured (established 524288 bind 65536)
[    0.312732] TCP reno registered
[    0.312935] NET: Registered protocol family 1
[    0.327276] pci 0000:02:00.0: Boot video device
[    0.327321] Trying to unpack rootfs image as initramfs...
[    0.568501] Freeing initrd memory: 12300k freed
[    0.574520] audit: initializing netlink socket (disabled)
[    0.574596] type=2000 audit(1259378898.571:1): initialized
[    0.574961] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.575173] VFS: Disk quotas dquot_6.5.2
[    0.575256] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.575369] msgmni has been set to 7379
[    0.575549] alg: No test for stdrng (krng)
[    0.575653] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.575724] io scheduler noop registered
[    0.575781] io scheduler anticipatory registered
[    0.575839] io scheduler deadline registered
[    0.575911] io scheduler cfq registered (default)
[    0.576263]   alloc irq_desc for 24 on node -1
[    0.576265]   alloc kstat_irqs on node -1
[    0.576285] pcieport 0000:00:15.0: irq 24 for MSI/MSI-X
[    0.576304] pcieport 0000:00:15.0: setting latency timer to 64
[    0.576665]   alloc irq_desc for 25 on node -1
[    0.576667]   alloc kstat_irqs on node -1
[    0.576683] pcieport 0000:00:16.0: irq 25 for MSI/MSI-X
[    0.576702] pcieport 0000:00:16.0: setting latency timer to 64
[    0.579513] Linux agpgart interface v0.103
[    0.579573] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.581309] brd: module loaded
[    0.581419] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    0.581671] PNP: No PS/2 controller found. Probing ports directly.
[    0.582585] i8042.c: No controller found.
[    0.582737] mice: PS/2 mouse device common for all mice
[    0.582826] Driver 'rtc_cmos' needs updating - please use bus_type methods
[    0.582910] rtc_cmos 00:07: RTC can wake from S4
[    0.583011] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.583151] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.583242] cpuidle: using governor ladder
[    0.583300] cpuidle: using governor menu
[    0.583360] No iBFT detected.
[    0.583671] TCP cubic registered
[    0.583769] NET: Registered protocol family 10
[    0.584178] lo: Disabled Privacy Extensions
[    0.584449] Mobile IPv6
[    0.584506] NET: Registered protocol family 17
[    0.584684] registered taskstats version 1
[    0.585332] rtc_cmos 00:07: setting system clock to 2009-11-28 03:28:18 UTC (1259378898)
[    0.585480] Freeing unused kernel memory: 660k freed
[    0.585760] Write protecting the kernel read-only data: 4072k
[    0.690259] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.690438] ACPI: Lid Switch [LID0]
[    0.690542] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    0.690621] ACPI: Power Button [PWRB]
[    0.690716] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    0.690791] ACPI: Sleep Button [SLPB]
[    0.690956] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    0.691031] ACPI: Power Button [PWRF]
[    0.707515] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    0.726180] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.736756] Uniform Multi-Platform E-IDE driver
[    0.741066] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[    0.741131]   alloc irq_desc for 21 on node -1
[    0.741133]   alloc kstat_irqs on node -1
[    0.741141] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
[    0.741215] forcedeth 0000:00:0a.0: setting latency timer to 64
[    0.766011] nvidia: module license 'NVIDIA' taints kernel.
[    0.766076] Disabling lock debugging due to kernel taint
[    0.804350] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr
[    0.804427] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
[    0.807469] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
[    0.807532]   alloc irq_desc for 20 on node -1
[    0.807534]   alloc kstat_irqs on node -1
[    0.807541] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 20 (level, low) -> IRQ 20
[    0.807638] ehci_hcd 0000:00:04.1: setting latency timer to 64
[    0.807641] ehci_hcd 0000:00:04.1: EHCI Host Controller
[    0.807753] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[    0.807848] ehci_hcd 0000:00:04.1: debug port 1
[    0.807912] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[    0.807927] ehci_hcd 0000:00:04.1: irq 20, io mem 0xd3489200
[    0.819108] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    0.819200] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.819261] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.819332] usb usb1: Product: EHCI Host Controller
[    0.819391] usb usb1: Manufacturer: Linux 2.6.32-rc8 ehci_hcd
[    0.819450] usb usb1: SerialNumber: 0000:00:04.1
[    0.819559] usb usb1: configuration #1 chosen from 1 choice
[    0.819641] hub 1-0:1.0: USB hub found
[    0.819702] hub 1-0:1.0: 7 ports detected
[    0.820165] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 19
[    0.820227]   alloc irq_desc for 19 on node -1
[    0.820228]   alloc kstat_irqs on node -1
[    0.820234] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 19 (level, low) -> IRQ 19
[    0.820320] ehci_hcd 0000:00:06.1: setting latency timer to 64
[    0.820322] ehci_hcd 0000:00:06.1: EHCI Host Controller
[    0.820412] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[    0.820499] ehci_hcd 0000:00:06.1: debug port 1
[    0.820563] ehci_hcd 0000:00:06.1: cache line size of 32 is not supported
[    0.820578] ehci_hcd 0000:00:06.1: irq 19, io mem 0xd3489100
[    0.831107] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[    0.831198] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.831259] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.831330] usb usb2: Product: EHCI Host Controller
[    0.831389] usb usb2: Manufacturer: Linux 2.6.32-rc8 ehci_hcd
[    0.831448] usb usb2: SerialNumber: 0000:00:06.1
[    0.831558] usb usb2: configuration #1 chosen from 1 choice
[    0.831641] hub 2-0:1.0: USB hub found
[    0.831704] hub 2-0:1.0: 5 ports detected
[    0.980329] SCSI subsystem initialized
[    0.983378] b43-pci-bridge 0000:03:00.0: power state changed by ACPI to D0
[    0.983603] b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[Z00F] -> GSI 23 (level, low) -> IRQ 23
[    0.983681] b43-pci-bridge 0000:03:00.0: setting latency timer to 64
[    0.987053] firewire_ohci 0000:04:00.0: PCI INT A -> Link[Z00J] -> GSI 22 (level, low) -> IRQ 22
[    0.987135] firewire_ohci 0000:04:00.0: setting latency timer to 64
[    0.988307] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.988701] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
[    0.988764]   alloc irq_desc for 18 on node -1
[    0.988766]   alloc kstat_irqs on node -1
[    0.988772] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18
[    0.988854] ohci_hcd 0000:00:04.0: setting latency timer to 64
[    0.988856] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    0.988966] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[    0.989056] ohci_hcd 0000:00:04.0: irq 18, io mem 0xd3488000
[    1.001231] libata version 3.00 loaded.
[    1.028169] ssb: ERROR: PLL init unknown for device 4322
[    1.028232] ssb: ERROR: PMU resource config unknown for device 4322
[    1.042016] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.042077] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.042148] usb usb3: Product: OHCI Host Controller
[    1.042207] usb usb3: Manufacturer: Linux 2.6.32-rc8 ohci_hcd
[    1.042267] usb usb3: SerialNumber: 0000:00:04.0
[    1.042376] usb usb3: configuration #1 chosen from 1 choice
[    1.042458] hub 3-0:1.0: USB hub found
[    1.042523] hub 3-0:1.0: 7 ports detected
[    1.042684] ahci 0000:00:0b.0: version 3.0
[    1.043030] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 17
[    1.043092]   alloc irq_desc for 17 on node -1
[    1.043094]   alloc kstat_irqs on node -1
[    1.043100] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 17 (level, low) -> IRQ 17
[    1.043197]   alloc irq_desc for 26 on node -1
[    1.043198]   alloc kstat_irqs on node -1
[    1.043205] ahci 0000:00:0b.0: irq 26 for MSI/MSI-X
[    1.043254] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl IDE mode
[    1.043327] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pmp pio slum part boh
[    1.043399] ahci 0000:00:0b.0: setting latency timer to 64
[    1.043522] scsi0 : ahci
[    1.043692] scsi1 : ahci
[    1.043814] scsi2 : ahci
[    1.043936] scsi3 : ahci
[    1.044223] scsi4 : ahci
[    1.044344] scsi5 : ahci
[    1.044531] ata1: SATA max UDMA/133 abar m8192@0xd3484000 port 0xd3484100 irq 26
[    1.051835] ata2: SATA max UDMA/133 abar m8192@0xd3484000 port 0xd3484180 irq 26
[    1.051904] ata3: DUMMY
[    1.051958] ata4: DUMMY
[    1.052016] ata5: DUMMY
[    1.052071] ata6: DUMMY
[    1.052524] ACPI: PCI Interrupt Link [Z000] enabled at IRQ 16
[    1.052585]   alloc irq_desc for 16 on node -1
[    1.052587]   alloc kstat_irqs on node -1
[    1.052591] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 16 (level, low) -> IRQ 16
[    1.052670] ohci_hcd 0000:00:06.0: setting latency timer to 64
[    1.052672] ohci_hcd 0000:00:06.0: OHCI Host Controller
[    1.052771] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[    1.052857] ohci_hcd 0000:00:06.0: irq 16, io mem 0xd3487000
[    1.056220] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[    1.060008] firewire_ohci: Added fw-ohci device 0000:04:00.0, OHCI version 1.10
[    1.110004] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.110066] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.110136] usb usb4: Product: OHCI Host Controller
[    1.110193] usb usb4: Manufacturer: Linux 2.6.32-rc8 ohci_hcd
[    1.110253] usb usb4: SerialNumber: 0000:00:06.0
[    1.110351] usb usb4: configuration #1 chosen from 1 choice
[    1.110433] hub 4-0:1.0: USB hub found
[    1.110496] hub 4-0:1.0: 5 ports detected
[    1.128008] usb 1-4: new high speed USB device using ehci_hcd and address 2
[    1.219280] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 23
[    1.219343] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 23 (level, low) -> IRQ 23
[    1.219419] nvidia: probe of 0000:00:03.5 failed with error -1
[    1.219801] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 22
[    1.219862] nvidia 0000:02:00.0: PCI INT A -> Link[LGPU] -> GSI 22 (level, low) -> IRQ 22
[    1.219937] nvidia 0000:02:00.0: setting latency timer to 64
[    1.220052] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  190.42  Tue Oct 20 20:25:42 PDT 2009
[    1.267837] usb 1-4: New USB device found, idVendor=05ac, idProduct=8507
[    1.267900] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.267962] usb 1-4: Product: Built-in iSight
[    1.268031] usb 1-4: Manufacturer: Apple Inc.
[    1.268089] usb 1-4: SerialNumber:
[    1.268210] usb 1-4: configuration #1 chosen from 1 choice
[    1.536008] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.536080] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.538253] ata2.00: ATAPI: OPTIARC  DVD RW AD-5960S, 2AP5, max UDMA/100, ATAPI AN
[    1.540464] ata2.00: configured for UDMA/100
[    1.560053] firewire_core: created device fw0: GUID 00264afffe1d5ea6, S800
[    1.585333] ata1.00: ATA-8: TOSHIBA MK2555GSXF, FH105B, max UDMA/100
[    1.585394] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.586250] ata1.00: configured for UDMA/100
[    1.600084] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK2555GS FH10 PQ: 0 ANSI: 5
[    1.601787] scsi 1:0:0:0: CD-ROM            OPTIARC  DVD RW AD-5960S  2AP5 PQ: 0 ANSI: 5
[    1.612343] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.612451] sd 0:0:0:0: [sda] Write Protect is off
[    1.612513] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.612536] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.612706]  sda:sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[    1.619400] Uniform CD-ROM driver Revision: 3.20
[    1.619521] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.660011] usb 2-5: new high speed USB device using ehci_hcd and address 3
[    1.702624]  sda1 sda2 sda3 sda4
[    1.703167] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.706278] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.706364] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.797323] usb 2-5: New USB device found, idVendor=05ac, idProduct=8403
[    1.797387] usb 2-5: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[    1.797448] usb 2-5: Product: Card Reader
[    1.797506] usb 2-5: Manufacturer: Apple
[    1.797563] usb 2-5: SerialNumber:
[    1.797679] usb 2-5: configuration #1 chosen from 1 choice
[    1.802534] Initializing USB Mass Storage driver...
[    1.802694] scsi6 : SCSI emulation for USB Mass Storage devices
[    1.802814] usbcore: registered new interface driver usb-storage
[    1.802875] USB Mass Storage support registered.
[    1.802980] usb-storage: device found at 3
[    1.802981] usb-storage: waiting for device to settle before scanning
[    2.023820] PM: Starting manual resume from disk
[    2.100012] usb 3-5: new low speed USB device using ohci_hcd and address 2
[    2.118119] kjournald starting.  Commit interval 5 seconds
[    2.118123] EXT3-fs: mounted filesystem with ordered data mode.
[    2.314919] usb 3-5: New USB device found, idVendor=05ac, idProduct=8242
[    2.314983] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.315041] usb 3-5: Product: IR Receiver
[    2.315099] usb 3-5: Manufacturer: Apple Computer, Inc.
[    2.315226] usb 3-5: configuration #1 chosen from 1 choice
[    2.628008] usb 3-6: new full speed USB device using ohci_hcd and address 3
[    2.851872] usb 3-6: New USB device found, idVendor=05ac, idProduct=0236
[    2.851934] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.851996] usb 3-6: Product: Apple Internal Keyboard / Trackpad
[    2.852059] usb 3-6: Manufacturer: Apple Inc.
[    2.852161] usb 3-6: configuration #1 chosen from 1 choice
[    3.164007] usb 4-1: new full speed USB device using ohci_hcd and address 2
[    3.385822] usb 4-1: New USB device found, idVendor=0a5c, idProduct=4500
[    3.385886] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.385948] usb 4-1: Product: BRCM2046 Hub
[    3.386005] usb 4-1: Manufacturer: Apple Inc.
[    3.386118] usb 4-1: configuration #1 chosen from 1 choice
[    3.388841] hub 4-1:1.0: USB hub found
[    3.391821] hub 4-1:1.0: 3 ports detected
[    3.689797] usb 4-1.1: new full speed USB device using ohci_hcd and address 3
[    3.812785] usb 4-1.1: New USB device found, idVendor=05ac, idProduct=8213
[    3.812857] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.812928] usb 4-1.1: Product: Bluetooth USB Host Controller
[    3.812988] usb 4-1.1: Manufacturer: Apple Inc.
[    3.813046] usb 4-1.1: SerialNumber:
[    3.813166] usb 4-1.1: configuration #1 chosen from 1 choice
[    4.262097] udev: starting version 147
[    4.881982] Bluetooth: Core ver 2.15
[    4.882318] NET: Registered protocol family 31
[    4.882377] Bluetooth: HCI device and connection manager initialized
[    4.882434] Bluetooth: HCI socket layer initialized
[    4.968573] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 9 (20090903/nsrepair-132)
[    4.968739] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 10 (20090903/nsrepair-132)
[    4.968902] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 11 (20090903/nsrepair-132)
[    4.969060] ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index 12 (20090903/nsrepair-132)
[    4.981205] ACPI: Battery Slot [BAT0] (battery present)
[    4.981667] ACPI: AC Adapter [ADP1] (off-line)
[    5.020263] usbcore: registered new interface driver hiddev
[    5.020469] usbcore: registered new interface driver usbhid
[    5.020531] usbhid: v2.6:USB HID core driver
[    5.395500] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    5.396325] input: bcm5974 as /devices/pci0000:00/0000:00:04.0/usb3/3-6/3-6:1.2/input/input5
[    5.396439] usbcore: registered new interface driver bcm5974
[    5.397716] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    5.397864] usbcore: registered new interface driver btusb
[    5.401063] i2c i2c-0: nForce2 SMBus adapter at 0x2140
[    5.401142] i2c i2c-1: nForce2 SMBus adapter at 0x2100
[    5.401674] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    5.408667] ACPI: SSDT 00000000bfec9c18 002BC (v01  APPLE  Cpu0Ist 00003000 INTL 20061109)
[    5.409204] ACPI: SSDT 00000000bfec9918 002AD (v01  APPLE  Cpu0Cst 00003001 INTL 20061109)
[    5.410805] Monitor-Mwait will be used to enter C-1 state
[    5.411013] Monitor-Mwait will be used to enter C-2 state
[    5.411036] Monitor-Mwait will be used to enter C-3 state
[    5.411043] Marking TSC unstable due to TSC halts in idle
[    5.411190] processor LNXCPU:00: registered as cooling_device0
[    5.411624] ACPI: SSDT 00000000bfec9f18 000C8 (v01  APPLE  Cpu1Ist 00003000 INTL 20061109)
[    5.411799] apple 0003:05AC:8242.0001: hiddev96,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:04.0-5/input0
[    5.412064] ACPI: SSDT 00000000bfec8f18 00085 (v01  APPLE  Cpu1Cst 00003000 INTL 20061109)
[    5.412575] Switching to clocksource hpet
[    5.412767] processor LNXCPU:01: registered as cooling_device1
[    5.418128] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-6/3-6:1.0/input/input7
[    5.418295] apple 0003:05AC:0236.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6/input0
[    5.427831] apple 0003:05AC:0236.0003: hidraw2: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6/input1
[    5.429155] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.823653] Linux video capture interface: v2.00
[    5.885153] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8507)
[    5.890224] input: Built-in iSight as /devices/pci0000:00/0000:00:04.1/usb1/1-4/1-4:1.0/input/input8
[    5.890346] usbcore: registered new interface driver uvcvideo
[    5.890406] USB Video Class driver (v0.1.0)
[    5.899533] applesmc: Apple MacBook Pro 5 detected:
[    5.899594] applesmc:  - Model with accelerometer
[    5.899652] applesmc:  - Model with light sensors and backlight
[    5.906951] applesmc:  - Model with 20 temperature sensors
[    5.907789] applesmc: device has already been initialized (0xe0, 0xf8).
[    5.907791] applesmc: device successfully initialized.
[    5.908516] applesmc: 1 fans found.
[    5.910460] input: applesmc as /devices/platform/applesmc.768/input/input9
[    5.910613] Registered led device: smc::kbd_backlight
[    5.910690] applesmc: driver successfully loaded.
[    6.699638] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[    6.699699] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[    6.699839] HDA Intel 0000:00:08.0: setting latency timer to 64
[    6.804639] usb-storage: device scan complete
[    6.806565] scsi 6:0:0:0: Direct-Access     APPLE    SD Card Reader   1.00 PQ: 0 ANSI: 0
[    6.807153] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    6.808788] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    8.314186] Adding 3906240k swap on /dev/sda3.  Priority:-1 extents:1 across:3906240k
[    8.508096] EXT3 FS on sda4, internal journal
[    8.673013] loop: module loaded
[    8.755908] lib80211: common routines for IEEE802.11 drivers
[    8.755971] lib80211_crypt: registered algorithm 'NULL'
[    8.812379] b43-pci-bridge 0000:03:00.0: PCI INT A disabled
[    8.862987] wl 0000:03:00.0: power state changed by ACPI to D0
[    8.863219] wl 0000:03:00.0: PCI INT A -> Link[Z00F] -> GSI 23 (level, low) -> IRQ 23
[    8.863297] wl 0000:03:00.0: setting latency timer to 64
[    8.896974] lib80211_crypt: registered algorithm 'TKIP'
[    8.897374] eth1: Broadcom BCM432b 802.11 Wireless Controller 5.10.91.9
[    8.916149] udev: renamed network interface eth1 to eth2
[    8.934271] nvidia_bl: Supported Nvidia graphics adapter 10de:0863:106b:00b9 detected
[    9.458351] hfs: write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.
[   12.202054] fuse init (API version 7.13)
[   12.397328] applesmc: wait status failed: 5 != 0
[   12.431850] applesmc: wait status failed: 5 != 0
[   12.452357] applesmc: wait status failed: 5 != 0
[   12.485226] applesmc: wait status failed: 5 != 0
[   12.518093] applesmc: wait status failed: 5 != 0
[   12.550960] applesmc: wait status failed: 5 != 0
[   12.583826] applesmc: wait status failed: 5 != 0
[   12.619341] applesmc: wait status failed: 5 != 0
[   12.652209] applesmc: wait status failed: 5 != 0
[   16.323649] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[   30.769420] Bluetooth: L2CAP ver 2.14
[   30.769504] Bluetooth: L2CAP socket layer initialized
[   30.935951] Bluetooth: RFCOMM TTY layer initialized
[   30.936065] Bluetooth: RFCOMM socket layer initialized
[   30.936143] Bluetooth: RFCOMM ver 1.11
[   31.271319] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   31.271387] Bluetooth: BNEP filters: protocol multicast
[   31.393566] Bridge firewalling registered
[   31.468658] Bluetooth: SCO (Voice Link) ver 0.6
[   31.468739] Bluetooth: SCO socket layer initialized
[   34.630667] applesmc: light sensor data length set to 10
[   35.169216] lp: driver loaded but no devices found
[   35.197692] ppdev: user-space parallel port driver
[   40.089856]   alloc irq_desc for 27 on node -1
[   40.089864]   alloc kstat_irqs on node -1
[   40.089886] forcedeth 0000:00:0a.0: irq 27 for MSI/MSI-X
[   40.090108] eth0: no link during initialization.
[   40.091805] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   44.444007] eth2: no IPv6 routers present
[   46.997379] hfs: filesystem is marked journaled, leaving read-only.
[   86.139694] applesmc: wait status failed: 5 != 0
[   86.174602] applesmc: wait status failed: 5 != 0
[   86.208913] applesmc: wait status failed: 5 != 0
[   86.242337] applesmc: wait status failed: 5 != 0
[   86.275738] applesmc: wait status failed: 5 != 0
[   86.309762] applesmc: wait status failed: 5 != 0
[   86.343170] applesmc: wait status failed: 5 != 0
[   86.380405] applesmc: wait status failed: 5 != 0
[   86.413933] applesmc: wait status failed: 5 != 0

[/div]

 

I'm sure this guide will be EPIC like the other one...good job, I'm looking at that same machine myself. Let us how how your temps treat you.

 

I hope it doesn't get too epic... I have a feeling it will though. There's a lot of hairy stuff I haven't worked through yet. GPU idles around 57-62C with powermizer enabled. Still waiting to get a decent battery estimate.

Edit: Did a seriously heavy edit to the first post and this post to clean it all up -- it's starting to look like a howto guide now

 

-what about the HD's temp?

 

HD runs around 34C, here's the rest:

Code:

temp1:       +33.0°C                                    
temp2:       +33.0°C                                    
temp3:       +31.5°C                                    
temp4:       +34.8°C                                    
temp5:       +54.5°C                                  
temp7:       +48.5°C                                                                   
temp14:      +53.8°C                                    
temp15:      +44.8°C                                                              
temp19:      +31.0°C                                    
temp20:      +39.0°C

 

That's pretty complicated for me but it's a really good guide. Is it OK if I link this guide on another forum?

 

Yeah absolutely please link to it

Any feedback is appreciated, this howto is just getting started.

Edit: Added some more info to the guide. Still more to come.

Edit 2: Updated howto for 2.6.31. I had posted a youtube vid last night but it is outdated with this update so I deleted it. I'll upload a new one when I have some time.

Edit 3: Updated howto with new NVIDIA drivers and some new info about backlight brightness. Added kernel config (not cut down yet, pretty bloated but safe).

Edit 4: Fixed: I said to select 2.6.30 in the boot menu when I had updated the guide for .31.1. Also changed 2.6.31 to 2.6.31.1 in the wireless section to match.

Edit 5: Added rc kernel section and updated the wireless section to make sure b43 isn't conflicting with the broadcom sta module (b43 locked up my system once -- don't want it to happen to anyone else). Also made some minor corrections and linked to a post on Ubuntu forums concerning ALSA. Note that 2.6.32-rc1 is the same as rc2 because of the Makefile, it will keep the rc1 source location but uname -r will say rc2. Thank Linus for that one

Edit 6: Update for 2.6.31.3 and 2.6.32-rc4.

 

what abt installing arch linux?

 

I run Debian so I couldn't tell ya... I did a quick search and found nothing pertaining to the MBP5,5 on Arch Linux forums... maybe someone else can comment.

 

hmm okay, i guess ill just install karmic beta, im only worried abt the battery life and the temperatures

 

Im still waiting for the guide, installing Arch Linux G50Vt with raid-0 in Arch linux

 

Hm, don't hold your breath, I've sold my G50V.

Sad to see it go but I wasn't using it at all after getting my MBP...

One of these days I'll try Arch. I've been on Debian since I was a teenager so it's sort of hard to break away.

 

Ohh no!! Hopefully you wont remove all the great guides you made for it. Thats what got me up and going.

 

Yea I miss it already (just shipped it on Monday). The G50V guide isn't going anywhere but it might get stale. I dumped almost everything I knew about the G50 configuration into the Linlap wiki and the howto guide, so there wasn't much to do besides keep uploading new kernel configs (which don't seem to get many downloads).

Just updated this MBP5,5 howto for 2.6.31.4 and did a little cleanup on it. Everything is running very smoothly now for me, no complaints at all except for the proprietary wireless drivers (work fine but I'd like to be able to tweak them).

 

Once you go Arch you can't go back

 

Let's get back on topic eh? This is my howto guide for MBP5,5, lulz. I'll check out Arch some time, I'm not too eager to stop using Debian. It runs on everything from my NSLU2, router, google dev phone, and of course all my lappys. That and I have about 10 years of 'the Debian way' of doing things seared into my brain. It wouldn't be easy to switch. I hear you guys tho, Arch is good for you.

 

Typing this, from arch linux on my MBP, everything works great, just dissappointed with a 4 hour battery life

 

Nice, any tips to share?

Edit: Are you using frequency scaling and PowerMizer for the GPU? Also what about backlight brightness, fan control, and keyboard backlight? I can get around 5hrs with everything tamed, but with my normal use I get less.

Updated howto for 2.6.32-rc5

 

What is the typical difference in battery runtime between OS X and Debian or Arch?
Same question about heat and fan noise?

 

Honestly haven't spent enough time in OS X to know the real battery life... I'd say around 1:30 to 2 hrs of difference, the claim is 7 hrs on OS X and I have seen around 4-5 hours with bluetooth turned off and low backlight, frequency on minimum, no keyboard backlight in Debian.

I posted my temps already above, I haven't checked them in OS X. I'll try to remember the next time I'm in OS X to check the temps and update this post.

Edit: Added recommended packages section to the guide.

 

How many watts does you MBP use according to powertop? what scripts and conf u got?

 

My reading is all over the place -- I attached a screenshot. Plugged in to mains power, My Kill-A-Watt (meter) says 43-44W.

I've been using an external mouse, the keyboard backlight is on and I have my brightness up. Bluetooth is off and I'm on Wi-Fi. My battery is on 90% and says 3:45 left (in gnome-power-manager).

Please see the recommended packages section for the software I'm using.

 

Wow, on powertop i get a reading of around 10-14W and i recommend the script found below to increase battery life

http://ubuntuforums.org/showthread.php?t=1215928&highlight=battery+life

 

Yeah it's not using that much power that'd be insane. As I said I can stretch it to 4+ hrs if I want to, but usually I'm not on conservative mode.

When my battery isn't charging my Kill-A-Watt says more like 15-20W. And that's with accessories plugged in like USB hard drives, keyboard and mouse.

 

I were thinking about is it possible to use bootcamp to install Linux?

 

I don't know about installing using bootcamp first-hand, but there is a guide here. I used rEFIt during the installation process, but I'm using bootcamp now instead of rEFIt to start my machine.

Edit: Update for new version of pommed which makes the mactel-patched gnome-power-manager obsolete. I've left the removal instructions in case anyone was using the old method.

Edit 2: Update for NVIDIA 190.40. I got build errors the first time, ran it again and it worked. Not sure why. **

Edit 3: Update for the LCD brightness section, I had to add nvidia_bl to /etc/modules on my system for it to work after a reboot.

Edit 4: Update for 2.6.31.5 and NVIDIA 190.42 **(fails for the same reason as .40, must modprobe -r nvidia first).

 

Just wanted to thank you for your guide. I've used debian for 10 years and have been looking for some good news about it on the new 13 inch mbps. Tonite I read through your guide and then I ordered me a macbook pro .

I'll be sure to keep an eye on this thread!

 

Hey mate great guide but i get this error when i try to upgrade to sid:

Code:

Calculating upgrade... Failed
The following packages have unmet dependencies.
  gnome-screensaver: Depends: libgnomekbd2 but it is not going to be installed
                     Depends: libgnomekbdui2 but it is not going to be installed
                     Recommends: rss-glx but it is not going to be installed
                     Recommends: libpam-gnome-keyring but it is not going to be installed
  gnome-settings-daemon: Breaks: gnome-screensaver (< 2.28.0) but 2.22.2-2 is to be installed
E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.

Any ideas?

 

There are unmet dependencies. Try waiting a day or two. You could also try uninstalling the gnome virtual package and then upgrading.

 

Maybe that's because i used a standard iso and not the netinst, i ll give that a shot

 

Does the notebook get hot? Or is it just warm?

 

Most of the time it runs cool. It will get warm after extended periods, but you can control the fan manually if it gets too hot.

Edit: Moved what I posted here into the howto. See the Fan control section.

Also moved the backlight pommed.conf tweak to the howto.

Updated the howto for 2.6.32-rc6. Also uploaded a new config for 2.6.31.5.

Edit 2: How to stop the terribly annoying volume adjustment sound... This will be in the next revision of the guide. Edit /etc/pommed.conf

Code:

# Audio support
audio {
	# Use amixer or alsamixer/alsamixergui to determine the sound card
	# and the mixer elements to use here.

	# sound card to use
	card = "default"
	# initial volume [80] (0 - 100%, -1 to disable)
	init = -1
	# step value (1 - 50%)
	step = 10
	# beep on volume change[B]
	beep = no[/B]

 

I've completed the installation now, and have a few comments and questions.

First -- everything works! I had some trouble upgrading to sid, just like others in the thread. On my second attempt I didn't install anything from tasksel when I ran the installation. Instead, I ran tasksel and installed desktop, laptop etc *after* the upgrade to sid. This made the installation process much shorter, and I also didn't encounter any problems with the gnome installation.

I've got a wierd problem though. The wl module won't work if the ssb module is loaded into the kernel. But for some reason I can't seem to blacklist it! I add it to the blacklist, but still it gets loaded. I have to modprobe -r both ssb and wl, and then modprobe wl again, for wireless to work. Any help with this would be greatly appreciated!

I also have a question about grub. Do I dare do the grub-legacy-update, or should I keep the grub chainloading? All the configuration dialogs nag about mbr, and I'm afraid I'll wipe something out that should remain intact. I'm very far from being tech savvy, so I can't say I really understand how mbr works on the mbp in relation to mac os x. Advice much appreciated!

Anyway -- I'm sure I'll have other questions eventually . Thanks a lot for a great guide!

/hcm

 

I'm running grub-efi-amd64 with rEFIt now. Works great!

For ssb loading, make sure there is a 'blacklist ssb' line in your /etc/modprobe.d/blacklist.conf and then run update-initramfs -ut. If that doesn't work let me know

I also installed just the base system from the netinst, I should probably mention this in the guide since there is heavy development going on and the gnome dependencies tend to be broken more than not.

Thanks for the comments!

 

The sound setup seemd to go well, until the also force-reload, which shows a host of errors:

$ sudo alsa force-reload
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/chris/.gvfs
Output information may be incomplete.
Terminating processes: 2095lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/chris/.gvfs
Output information may be incomplete.
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/chris/.gvfs
Output information may be incomplete.
.
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/chris/.gvfs
Output information may be incomplete.
Unloading ALSA sound driver modules: snd-hda-codec-cirrus snd-hda-intel snd-hda-codec snd-hwdep snd-pcm snd-seq snd-timer snd-seq-device snd-page-alloc (failed: modules still loaded: snd-hda-codec-cirrus snd-hda-codec snd-hwdep snd-pcm snd-timer snd-page-alloc).
Loading ALSA sound driver modules: snd-hda-codec-cirrus snd-hda-intel snd-hda-codec snd-hwdep snd-pcm snd-seq snd-timer snd-seq-device snd-page-allocFATAL: Error inserting snd_hda_intel (/lib/modules/2.6.31-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.31-14-generic/kernel/sound/acore/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_seq (/lib/modules/2.6.31-14-generic/kernel/sound/acore/seq/snd-seq.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_seq_device (/lib/modules/2.6.31-14-generic/kernel/sound/acore/seq/snd-seq-device.ko): Unknown symbol in module, or unknown parameter (see dmesg)
(failed).

 

Is there anything additional that needs to be done with the wireless to "activate" it? Your setup instructions seemed to have ran flawlessly for me, and the "Hardware Drivers" shows that the "Broadcom STA wireless driver" is installed and active, but network manager doesn't seem to show any wireless interface.

 

You've got to be using pulseaudio, on Ubuntu? Stop it and then try again.

Code:

sudo /etc/init.d/pulseaudio stop

or

Code:

sudo killall pulseaudio

I can't help you with a wireless problem without more info. Make sure the ssb and b43 modules aren't in your lsmod for starters.

 

@ALLurGroceries

Thanks! I think that did it. I'm confused why no one bothered to include that important detail in the howto. I also took the initiative to disable the pulseaudio service, and enable the alsa service.

Now if only I could figure out my wireless...

 

I wrote the howto for debian so thats why that detail for ubuntu isnt in the guide. On my next revision I will add it.

For the wireless post the output of sudo lsmod, there may be conflicting modules.

 

The original guide I read had me disable the bcm kernel module, and enable the b43 and ssd modules, which supposedly replace it. I fixed my wireless problem by not doing that, since b43 and ssd aren't entirely perfect.

 

Updated the howto for 2.6.31.6 and 2.6.32-rc7, newer nvidia-bl from mactel ppa (nvidia-bl-dkms_0.14~karmic), added section on problems with dkms upgrades, added detail for stopping pulseaudio to the audio section, and added blacklisting ssb in the wireless section.

 

Just a quick question. I've recently been pondering the purchase of a macbookpro.
Have you been able to utilise both GPU's when running linux?
Every account I've read so far has linux defaulting to the higher end graphics card.
Bad for temps and battery life.

thanks! awesome guide!

 

I have a MBP5,5 which is the 13", it only has one (integrated) GPU, the 9400. The 15" and 17" have an integrated 9400 and a dedicated 9600M, but even in OS X, there is no Hybrid SLI. They are never used together. In terms of switching between them, it could be possible by changing the PCI ID in xorg.conf. I have no idea since I have a 5,5 which is a 13"... sorry.

 

edit: moved the lspci and stuff to the guide.

 

Hey dude!

Thanks a lot for your how to. I was getting bald trying to know why Backtrack 4 (ubuntu based) don't recognise the trackpad of my macbookpro 5,5. Spent all the day googling for wrong keywords until I found your thread. And following your instructions to setup the trackpad I got it working in 5 min! Thanks indeed!

Stopped to configure it for today but I bookmarked this thread and will certainly come back to adjust other features. Congratulations for this great tuto!

 

Cool, thanks for the kind words, I'm glad it helped. I've sold my MBP so I haven't been updating the guide, but if there is anything that I can help with let me know. Cheers.

Edit: For full disclosure the reason I sold my mbp was the firewire chipset that would not work with FFADO, even the patched FFADO that uses the newer firewire modules. Bummer because it is a sweet system otherwise.

 

Hello,

First of all, thank you for your guide, it really helped me to install Debian on my macbook 5.5.

Until yesterday , everything worked fine, except the lcd backlight and the remote (the remote is no big deal but it worked on ubuntu. In fact here I can't even launch lirc).

So I followed the guide and installed dkms (from official repositories) and nvidia-bl-dkms (and did everything as mentioned), and after the reboot, the backlight works but I have problems. I removed the two packages and modules, but nothing changed.

I now have several problems that I can't solve on my own:
- just before the menu of grub, I have an "error: file not found", just after the "welcome to grub", but everything works well (I don't know if it's related).

- the terminals (on ctl-alt-FX) are moved downway: I just see the first two lines.

- compiz doesn't work anymore, when I try to do "compiz --replace", I get:

Code:

compiz (core) - Fatal: glXCreateContext failed
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0

Launching fallback window manager
Window manager warning: Workarounds for broken applications disabled. Some applications may not behave properly.

If I try with fusion-icon, the screen just blink but nothing change.

Does someone had the same problem or have any idea on how to solve it?
I just installed Debian a week ago, I can do it again but I'm afraid to get the same problem (I need the backlight to work).

By the way, I'm using the nvidia proprietary drivers 195.36.24. The problem might come from that, does someone had problems with older versions?

Thank you for any help.

 

Try glxgears, if that doesn't run, reinstall the nvidia drivers and you should be all good with compiz.

For the grub file not found error, it's of no concern and unrelated to your problems.

Try a newer (karmic or lucid) version of nvidia-bl-dkms from the mactel ppa.

I sold my mbp5,5 months ago, so I no longer update the guide. Best of luck.

 

Well that's too bad, since your guide is certainly the most up-to-date that I could find for this computer.

By the way, trying glxgears gave me an error: Error: glXCreateContext failed, and my friend google told me to reinstall the driver nvidia. Now it works, so thank you.

By the way the terminals problem seems to appear randomly, that is strange.

And a last thing, were you able to use the remote with your macbook? I tried with lirc but it crashes each time. I'll try to make it work later, but I'd like to know if it worked for you, if you tried.

Thanks again (I was ready to reinstall debian).

 

Glad it worked out for you... about the remote, do you mean the wireless thingy with multimedia controls? I don't think I got one with my mbp. Looks like a m-a a-i apple-remote should do the job, after downloading the source, according to this. It's a bit old so maybe there is a better way, like a kernel config option and then just building it from the kernel tree.

I guess I could update the guide... I'll try to remember to do that this weekend.