Plug on Adaptor charger is fault is the correct type to get? I've MSI GP73 8RD laptop.
The charger is a Chicony 150 watts 19.5 volts at 7.7Amps.
I measure the plug and this closes I can find: https://au.element14.com/lumberg/1636-07/power-entry-plug-10a-20vdc-cable/dp/2523616
https://ibb.co/jysCb34
Edited.
I just finished test the plug, and strip the cable back at the plug end and found the cable broken on the negative wire, this wire is not shielded, the wire broken about 25mm from the elbow plug.
I temporary repair the wire for now.
-
you need any ,.,. chicony or delta
same adapter "tip" and 19.5V for this notebook
A - optional "but not exist difference in performance"
stronger PSU ,.,possible only faster recharge battery in extreme load ,,.faster battery wear level
extreme load -- OC + mods .,,or is all identical ,,,.EC FW most time "not possitible draw more than is this lock"
V x A - total power
19.5 x 7.7 -150W
edit
Tip Size: 7.4 x 5.0mm ??? -
So Noone makes a replacement tip, as in soldering a new tip on the lead.
The charger is OK, it just faulty tip end?
https://ibb.co/QD4F9VW
Last edited: May 24, 2021 -
Or buy the lead, with tip, eg: DC Tip 7.4x5.0mm Power Plug Socket Connector with Cord/Cable for Laptop
https://www.ebay.com.au/itm/3242578...rand=Unbranded&_trksid=p2047675.c101195.m1851
Plug on Adaptor charger is fault is the correct type plug to get?
Discussion in 'MSI' started by aurion45, May 24, 2021.