The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Thomson Speedtouch 585 -- Counter Strike PortForwading problem

    Discussion in 'Networking and Wireless' started by OmarAn, Jul 23, 2012.

  1. OmarAn

    OmarAn Notebook Geek

    Reputations:
    0
    Messages:
    92
    Likes Received:
    0
    Trophy Points:
    15
    I've searched all the internet, watched over 15 youtube videos on how to open ports for counter strike and non of them worked at ALL.(I don't even know if this is the right place where to post in this part of the forum)
    come on guys..this is making me mad..it's simple but i didn't have luck even a nibble..I need some help
    I tried the stock one on my router and that didn't work as well

    1st
    UDP 1200 - 1200 1200 - 1200 - - Edit Delete
    UDP 27000 - 27015 27000 - 27015 - - Edit Delete
    TCP 27030 - 27039 27030 - 27039 - - Edit Delete

    2nd
    TCP 1200 - 1200 1200 - 1200 - - Edit Delete
    UDP 1200 - 1200 1200 - 1200 - - Edit Delete
    TCP 27000 - 27015 27000 - 27015 - - Edit Delete
    UDP 27000 - 27015 27000 - 27015 - - Edit Delete
    TCP 27020 - 27039 27020 - 27039 - - Edit Delete
    UDP 27020 - 27039 27020 - 27039 - - Edit Delete

    3rd
    UDP 1200 - 1200 1200 - 1200 - - Edit Delete
    UDP 27000 - 27015 27000 - 27015 - - Edit Delete
    TCP 27030 - 27039 27030 - 27039 - - Edit Delete

    4th
    TCP 27000 - 30000 27000 - 30000 - - Edit Delete
    UDP 27000 - 30000 27000 - 30000 - - Edit Delete

    Here are the ones i used.
    i also went to Open Port Check Tool - Test Port Forwarding on Your Router to see if 27015 was open. and from the first time i began, it always tell me that this port is closed
    .
    i also ran a server on hlds and went to gametracker to see if "www.yougetsignal" was wrong and i can still find the server but no luck.

    what am i doing wrong?
     
    OmarAn, Jul 23, 2012
    #1
  2. iaTa

    iaTa Do Not Feed

    Reputations:
    1,328
    Messages:
    2,675
    Likes Received:
    197
    Trophy Points:
    81
    What firmware are you running on your ST585 and what hardware version do you have - V6?
     
    iaTa, Jul 24, 2012
    #2
  3. OmarAn

    OmarAn Notebook Geek

    Reputations:
    0
    Messages:
    92
    Likes Received:
    0
    Trophy Points:
    15
    yes it's a Thomson Speedtouch 585 v6
    Product Name:ST585
    Software Release:7.4.3.2
     
    OmarAn, Jul 24, 2012
    #3
  4. iaTa

    iaTa Do Not Feed

    Reputations:
    1,328
    Messages:
    2,675
    Likes Received:
    197
    Trophy Points:
    81
    Hmmm I don't have any problem with CS using exactly the same setup.

    Have you checked your Windows firewall settings?
     
    iaTa, Jul 24, 2012
    #4
  5. OmarAn

    OmarAn Notebook Geek

    Reputations:
    0
    Messages:
    92
    Likes Received:
    0
    Trophy Points:
    15
    mmmmmm, yes i did but what about them specifically?
    primarily, what settings should i check?
     
    OmarAn, Jul 24, 2012
    #5
  6. iaTa

    iaTa Do Not Feed

    Reputations:
    1,328
    Messages:
    2,675
    Likes Received:
    197
    Trophy Points:
    81
    Try disabling it temporarily and see if that helps.
     
    iaTa, Jul 25, 2012
    #6
  7. OmarAn

    OmarAn Notebook Geek

    Reputations:
    0
    Messages:
    92
    Likes Received:
    0
    Trophy Points:
    15
    it is still closed after disabling it temporarily ...i wonder why
    anw, i've read some articles and from what i learned, i need a public ip adress to work not a private on..
    so ideas???
     
    OmarAn, Jul 25, 2012
    #7