The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    HEL80 battery

    Discussion in 'Other Manufacturers' started by unleashthemonkey, May 16, 2007.

  1. unleashthemonkey

    unleashthemonkey Notebook Enthusiast

    Reputations:
    0
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    15
    Hi i just got the HEL80 and im not sure if i just havent looked hard enough but i cant find out how too see how much battery charge I have, can anyone help me. Also, how could i find out what rpm my hard drive spins at.
     
  2. Tim

    Tim Notebook Virtuoso

    Reputations:
    2,752
    Messages:
    3,141
    Likes Received:
    2
    Trophy Points:
    106
    Well you could download a program called Notebook Hardware control. It gives you battery readings among other things.

    I am not sure about your second question but you could try HDTune to see if that works.
    Tim
     
  3. motors4fun

    motors4fun Notebook Enthusiast

    Reputations:
    32
    Messages:
    38
    Likes Received:
    0
    Trophy Points:
    15
    if you use any bios after 114, i think, will give you the standard windows battery icon in your system tray.
     
  4. Lt.Glare

    Lt.Glare Notebook Evangelist

    Reputations:
    171
    Messages:
    500
    Likes Received:
    0
    Trophy Points:
    30
    Notebook Hardware Control has a utility in it that gives you the specs of your entire computer, including the hard drive maker, model, RPM speed, and hard drive space.

    This info is usually also on the sticker on the hard drive itself, just pull it out of your computer (when its off of course), and look for the relevant numbers (e.g. look for the numbers 4200, 5400, or 7200 for the RPM speed).

    As you are new to the forum, I have no idea how extensive your tech knowledge is, so i'll also point out that you need to be very careful with your hard drive. It is fairly fragile, and should not be shaken, dropped, or squeezed hard on the top and bottom. Also make sure your not in a dusty room, and try to be touching something grounded when you handle it, such as a metal desk. Any static electricity can permanently screw it up, even if you don't feel a shock.

    If you knew all that, sorry for being verbose, just trying to be through :D