The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    How to disassemble Zepto 6324W?

    Discussion in 'Other Manufacturers' started by Zep2, Dec 26, 2010.

  1. Zep2

    Zep2 Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    Is there anyone who can tell me how to disassemble one (or two) Zepto 6324W totally?

    I have removed all screws on the back and sides, and even removed the keyboard. But then I could not figure out how to open it. I even could not remove CD-ROM drive.

    Just tell me how to go further here from, please.

    I have two 6324W, each has some different defects, but not the same. So I am thinking to take both of them apart and put the good things together and get one of them without defects.

    For example, take the WLAN card from one to the other. Is it possible?

    Thanks!
     
    Zep2, Dec 26, 2010
    #1
  2. John Ratsey

    John Ratsey Moderately inquisitive Super Moderator

    Reputations:
    7,197
    Messages:
    28,841
    Likes Received:
    2,167
    Trophy Points:
    581
    The wireless card is under the keyboard and the optical drive is held in place by a screw under the memory slot cover.

    It is most likely that the casing is held together by plastic clips along the seams as well as by screws. You can try putting a small screwdriver into one of the joins and gently levering the two parts apart.

    John
     
    John Ratsey, Dec 26, 2010
    #2