The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    IFL-90 Assembly-issue

    Discussion in 'Other Manufacturers' started by stiekske, Jun 12, 2007.

  1. stiekske

    stiekske Newbie

    Reputations:
    0
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    5
    Hi everyone! I'm assembling my IFL-90 and i'm running in to a little problem. Don't know if this is the right place because it's a WIFI related problem but since it's a IFL-90 and googling on IFL-90 or 4965AGN doesn't yield any result, i thought i should try it over here. :)

    I've inserted the card and trying to connect the antennawires. Here's the problem: i'm used to two wires. black on main and grey on aux. This laptop's got three wires and three connectors on the card. The wires are black, grey and white and the card is marked one, two and three. I don't want to screw it up so i don't want to use the trail and error method.

    I've been searching for a service/assembly manual for days but i guess this thing is just too new. I hope someone is able to help me! thanks!

    ps. If this forum isn't the right place for this, i'm sorry and please close my topic.

    btw: nice forum! i'm new ;)
     
    stiekske, Jun 12, 2007
    #1
  2. Rene S - Zepto

    Rene S - Zepto Company Representative

    Reputations:
    63
    Messages:
    524
    Likes Received:
    0
    Trophy Points:
    30
    The order is (from left to right)

    Black, Grey, White
     
    Rene S - Zepto, Jun 12, 2007
    #2
  3. Pitabred

    Pitabred Linux geek con rat flail!

    Reputations:
    3,300
    Messages:
    7,115
    Likes Received:
    3
    Trophy Points:
    206
    Left to right, with the connectors at the "top" end of the card as you're looking at it? ;) I'm assuming so, but you've gotta be thorough.
     
    Pitabred, Jun 12, 2007
    #3
  4. Rene S - Zepto

    Rene S - Zepto Company Representative

    Reputations:
    63
    Messages:
    524
    Likes Received:
    0
    Trophy Points:
    30
    You are most certainly correct. That is with the connectors at the "top".
     
    Rene S - Zepto, Jun 12, 2007
    #4
  5. stiekske

    stiekske Newbie

    Reputations:
    0
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    5
    ha! thank you both.

    :notworthy:

    can't wait to try it out.
     
    stiekske, Jun 12, 2007
    #5