The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Ricoh R5C833 Cardreader( Compal FT02) and Windows 7 x64

    Discussion in 'Other Manufacturers' started by slan, Sep 16, 2009.

  1. slan

    slan Notebook Enthusiast

    Reputations:
    13
    Messages:
    22
    Likes Received:
    0
    Trophy Points:
    5
    So, i have install the driver version 3.55.01 (older too), all without problems. When i put formated in FAT MMC or SD Card in the cardreader, explorer will format the card. When i format one 64 MB MMC card, the new size is 48 MB. When the others have the same problem, here is the solution:

    So, as first deinstall the old driver, if installed, from programs and futures, the name is Ricoh R5C83xx/84x Flash media controler driver and restart. From http://support.us.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R219002&formatcnt=1&libid=0&fileid=311556 download the driver version 3.57.01, install and restart. Then work all great. :)
     
    slan, Sep 16, 2009
    #1