The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Upgrade Processor for 4100

    Discussion in 'Other Manufacturers' started by dgr8dude, Oct 30, 2007.

  1. dgr8dude

    dgr8dude Newbie

    Reputations:
    4
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    5
    Hi,

    Is it possible to replace my 4155's AMD Turion 64 MT 30 to a more powerful processor? Which one is recommended? Thanks.
     
  2. kubel

    kubel Notebook Evangelist

    Reputations:
    67
    Messages:
    444
    Likes Received:
    0
    Trophy Points:
    30
    Unfortunately you are stuck in s754, so you don't have many options. Some candidates:


    Mobile Athlon 64 4000+
    Turion 64 ML-44
    Turion 64 MT-40
    Mobile Sempron 3600+

    The MT-40 would be your bet. You could also go with an ML-44, it will be a bit faster, but it's also a little bit hotter. The Sempron will be your best value, but it's lacking in the cache, power saving, and cooling departments. If your notebook is already warm or you don't want to lose any more battery life, I would stick with the MT line. If you don't care about cooking your laptop and like having 'an impressive one half of ten minutes' battery life, but only want pure speed, the Athlon will be your best bet. I'm pretty sure that's the fastest mobile processor you can get in that socket.
     
  3. dgr8dude

    dgr8dude Newbie

    Reputations:
    4
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    5
    Thanks. Is it worth it replacing the CPU? Even though I have a MT-30, it still runs hot, but a laptop cooler does the trick and it always plugged to the power outlet. Is it fairly easy to replace the CPU? Does it require soldering? Thanks.
     
  4. enlight22

    enlight22 Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    the processor is in a socket, so no soldering, and is accessable from the bottom panel, but because the heatsync is under the lip of the housing dissassembly of the housing is required, if anyone can explain the minimum dissassembly required, id be greatful. thanks...