The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    anyone help with a Getac V100 service manual / schematic

    Discussion in 'Other Manufacturers' started by ffrlr, Feb 18, 2013.

  1. ffrlr

    ffrlr Newbie

    Reputations:
    0
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    5
    Hi folks
    I have just picked up a Getac V100 and for some reason it doesn't seem to see the WWan card installed, it came with a Gobi2000, which it didn't detect I tried the gobi in my HP laptop and it works fine.
    I tried the Option GTM378 card in the Getac, it doesn't see that either, nor does it see a mini-pci wifi card plugged in the slot.
    It came with Windows 7 on, I have reformatted it and tried Windows 7, XP but the same thing happens, I have installed all the drivers for the motherboard so I am happy it isn't anything related to that, nothing shows up in device manager.
    The mini-pci cards fit onto a daughter board behind the battery, it is connected to the main motherboard through a 60 way 0.5mm FPC cable, the cable / sockets look ok too.

    The daughter board has 4 mini dip switches on, I have switched them around but it makes no difference.

    Really need a schematic if anyone can help please.

    Kind regards
    Ffr.
     
    ffrlr, Feb 18, 2013
    #1