!!!!HELP PLEASE!!! some times, my averatec 2300 turns on, green light comes on, but screen stays black. I connected it to a monitor but there is nothing on the monitor either, put a flashlight to the screen and didn't see nothing. The only way i can bring the screen back to life is by disconnecting the battery and unplug it from the wall for about 10 min. then turn it on and there it is, everything back to normal. can somebody help me?
-
-
serenityconsulting Notebook Consultant
lots of posts on this. Please do a search.
My opinion is this model has a very poor design for cooling the graphics chip. You can also search this forum for my instructions on a simple modification to get around this issue. My Everex equivalent has been running day in day out for 2 years now.
Immediately! Make sure you are increasing airflow through the unit with a fan based cooling pad. Repeated overheating WILL kill your notebook. -
I didnot find much. If when the screen goes black and an external monitor doesnt work either, what would the problem be?
-
-
Thank you. I appreciate your help.
How can i fix that? -
serenityconsulting Notebook Consultant
Frankly, this notebook is not worth the typical cost of a new motherboard. You might be able to find a used working version of the same notebook for less money - - then swap your hard drive and maybe RAM to be up and running almost immediately.
If you DO go this route, I strongly recommend making the cooling improvements detailed elsewhere in this forum to avoid a recurrence. -
thanks for your help. as it turns out, this laptop screen is not working at all anymore. I can hear the pc working inside but no more screen. useless, is so frustrating. This is my daughter computer, I can't afford buying a new one. Thanks for your help.
-
What is the model name of your Everex?
Thank you. -
serenityconsulting Notebook Consultant
hmmm - obviously didn't do as I suggested and do a search... it's right there toward the upper right corner of this page....
so I did it for you....
http://forum.notebookreview.com/showthread.php?t=394006
...a little effort would have saved you days of waiting for somebody else to do this for you. Sorry if I sound a little pissy, but come on folks, if you can't drum up the effort to do this much to help yourself, it is very doubtful that you will make the effort to actually do the recommended procedure. And then all you did was waste MY time.
averatec 2300 turns on but screen stays black
Discussion in 'Other Manufacturers' started by camilo ACOSTA, Mar 25, 2010.