The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    CF-19MK3 Screen Bezel Change

    Discussion in 'Panasonic' started by Twocents, Oct 11, 2012.

  1. Twocents

    Twocents Notebook Consultant

    Reputations:
    17
    Messages:
    128
    Likes Received:
    0
    Trophy Points:
    30
    So today the replacement screen bezel with screen arrived. It is the correct bezel with the little bumps on either side of the hinge. Is there anything in particular I need to have to keep the water-resistance all good? Any other advice y'all have for doing this thoroughly and correctly? I've never opened up fully ruggedized Toughbook, but haven't had any problems with CF-51/52s. Thanks in advance :)
     
  2. toughasnails

    toughasnails Toughbook Moderator Moderator

    Reputations:
    7,107
    Messages:
    6,193
    Likes Received:
    2,254
    Trophy Points:
    331
    It's not really that hard, I find that if you take pictures as you go it helps when it's time to put it back together.
     
  3. Twocents

    Twocents Notebook Consultant

    Reputations:
    17
    Messages:
    128
    Likes Received:
    0
    Trophy Points:
    30
    Yeppers, document it all just in case. So you can just reuse all the sealer double sided tape and such?
     
  4. toughasnails

    toughasnails Toughbook Moderator Moderator

    Reputations:
    7,107
    Messages:
    6,193
    Likes Received:
    2,254
    Trophy Points:
    331
    That is what I have done in the past....works for me