CF-28 internal bluetooth WITH CF-CARD

hi to all
has someone tried for using internal bluetooth pcmcia card... if the cf-cards of stecom and billionton CFT02- CF CARD adapter whole pcmcia don't have problems of length against modem and lan connectors?? instead of the billionton with spar refolded that I have read that she is installed well among the two connectors??

thanks frank

f orum question setup... because when I receive an answer he doesn't send me mail even if do I have setting this action in preferences??

 

This is the bluetooth card we use.... Most of us anyway. It requires that you trim a little of the back of the Lan/Modem cover. Panasonic made the cover with little plastic arms that stick out to hold the original Cisco wifi card in place. It is shorter than the BT card so you need to trim off a few mm. Then slide the BT card in and reinstall the cover.

I'm not sure about your other wuestion... You may have to go into User CP to elect to have emails sent to you about updated threads.

 

hi tougkbook
we use normal pcmcia card not cf-card + adapter\ok??
but in this change that I have to make of some mm. without raising the weldings of the 2 connectors modem-lan?? are they attached during to make same mm..?

regards

 

... you write... This is the bluetooth card we use...

what is photo?? or model please...regrads

 

Sorry... I meant to include this link....

http://cgi.ebay.com/Billionton-v2-0...ryZ44999QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I buy from BOTEQ on ebay. He's a great guy and will work with you on price depending on how many you need.

As for the trimming needed. It is fairly evident what needs to be trimmed. If you insert the PCMCIA card and then try to put the cover back on you will see that there are two places that need 2mm-3mm trimmed away. It is at the base of where the circuit board screws screw into.

Hope this helps...

 

ok thanks my friend.. i have buy this now ... private paypal..grat guy..best price
bud ..2 pieceses 2mm-3mm trimmed away.... possible to do this with connectors modem and lan attached to the plastics and the threads?? or to detach threads and pond welding?? are connectors detached by the plastics or glued??

the old model this card with antenna retractable..mobile.... notis beautifull for customize??

 

The cables can be connected. It will not affect it at all. Just when you go to put the cover BACK on, you will see that the cover piece has extra ribs on the back for support that will need to be trimmed off for the Billionton card to fit properly.

I cavi possono essere connessi. Essa non pregiudica affatto. Solo quando si torna a porre il coperchio, vedrete che la copertura pezzo ha extra RIBS sul retro per sostenere che dovranno essere coronati off per il credito a billionton inserito correttamente.

 

very thanks for explication and for ...italian language....
USA is the best!!!