The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    CF-29 LCD inverter

    Discussion in 'Panasonic' started by bugly, May 4, 2009.

  1. bugly

    bugly Notebook Geek

    Reputations:
    0
    Messages:
    95
    Likes Received:
    0
    Trophy Points:
    15
    Hello,
    A work CF-29 Toughbook screen went down today and it appears to be the LCD inverter board. My question is are the inverter boards interchangeable between the CF-28 and CF-29? Does anyone here have one for a CF-29 for sale?
    Thanks again so much,

    Kevin
     
    bugly, May 4, 2009
    #1
  2. ohlip

    ohlip Toughbook Modder

    Reputations:
    1,110
    Messages:
    2,358
    Likes Received:
    107
    Trophy Points:
    81
    Hi! before you look a new inverter try to inspect the solder between the bus bar and the pcb board coz overtime it loosen due to heat. It a wire about 5mm in length and usually glued to a bus bar( a rectangular shape attached to the pcb board with black color ). You can see it its like nothing loose coz as I said its glued but the solder are capot( terms I used to call when solder is open, Zeta). We are talking about here the inverter itself. But be careful this bus bar is easy to break.


    ohlip
     
    ohlip, May 4, 2009
    #2