CF-29 Port replicator

Does anyone have the PN and pinout for the port replicator mating connector and the pinout for a CF-30? I would like to build a custom application docking station but cant seem to get a good answer from Panasonic and Gamber just wants to sell me a docking station they build. Any information would be a big help thanks.

 

For part number CF-VEB272A2W (Port Replicator) the part number DL3UP1438AAA is shown as the connector.

What pinout do you need for the CF-30?

You may just want to buy either a used port replicator or a docking station and buy those parts. The connectors are going to sell for at least $45 each... Plus whatever else you need that you could harvest from an existing mount.

 

Thanks a bunch
I need the pinout for the port replicator pins, Eithernet, Power, USb and audio and posibly the serial COM. so the DL3UP1438AAA is the connector for the docking station side of the replicator?

 

Yes.... Depending on your email provider I may be able to email you the complete schematic... What is the model you have or want to get? (Complete model number please.)

 

The Model # is CF-30GTSZZAM

 

If you could shoot me an email with scematic that would be great. BTW thanks fo4r the PN I think I found the connector for $36, just wish the distributor had a data sheet to be posotive.

 

fd2blk...
Email sent


Alex

 

Thanks for all the help everyone, and I almost have everythying I need. I have the port replicator connector and have verified all the pins now the only part I need is the connector that mates with the ribbon cable end of the port replicator connector (P/N DL3UP1438AAA) If anyone has this PN that would be a big help,

Ok I have researched a little more and think it may be K1FB180A0002 or K1FB180A0004 but am not sure, these are the only 2 80 pin connectors shown for the port replicator but I am concerned the FPC is just the ribbon cable and you need both the "K1" connectors again any help would be great


THanks

 

I am also looking for the schematic of the port replicator. Could you shoot me an email as well?

Thanks,
Nick

 

I could.... If I had an email address...

 

Well the bad news is panasonic will not sell the connectors I need. I tried twi differnt distributors with no luck. Panasonic tells me to go to Heartland and they tell me they dont sell connectors they just refurbish boards. What is realy screwed up is I am able to order the parts on line but they get cancled two weeks later

 

Hmmmm.... I just ordered pretty much the same thing for the CF-18 port replicator. Heartland can be kind of demanding that you MUST have the exact part number. If you have any doubt...

All my manuals are listed by exact model number. Do you have the model number of the port replicator?

 

I have the corect P/Ns its just that heartland said they don't sell parts. Do you have the phone number for the department you spoke to?
P/N DL3UP1438AAA,K1FB180A0002, K1FB180A0004
I checked the parts of the panasonic website and they are valid parts
http://www.pstc.panasonic.com/EpartR/PartslistChoice.asp

Again Thanks

 

My apologies. [email protected]