The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    CF-31 touchscreen issue resolved!

    Discussion in 'Panasonic' started by Rob, May 10, 2011.

  1. Rob

    Rob Toughbook Aficionado

    Reputations:
    450
    Messages:
    3,941
    Likes Received:
    61
    Trophy Points:
    116
    So I was screwing around with the tablet PC settings (in tablet mode in BIOS) on my cf-31 and basically what I've determined is this:

    1) On a BASE Windows 7 load the mouse will only move to where you tap the screen on the RELEASE of your finger or stylus from the screen AFTER YOU TAP IT, NOT on the tap its self
    2) This leads to a VERY unsensitive screen!
    3) All I did was go into the Tablet PC Settings in the control panel, click on the "Other" tab, then go to "Go to input panel settings". The bubble that was highlighted default was "Point to the input panel icon or the tab", I changed it to: "Tap to the input panel icon or the tab"

    The difference here besides it being WAY more sensitive is the fact that the mouse jumps to where you touch the second you touch there instead of on the release!! It's totally !

    IF YOU GO THERE AND "Point to the input panel icon or the tab" IS ALREADY SELECTED THEN SELECT THE OTHER ONE, APPLY THEN GO BACK TO IT AND APPLY AGAIN!

    Hope this helps!!!
     
    Rob, May 10, 2011
    #1