HI Guys,
Long time since my last post. I have now a CF-31GG2EA1M Laptop for my wife.
I have a Factory CF-31 Mk1 restore disk with W7 on it that I just used on my CF-31A.
I did have a working W7 copy working on her computer but it was from a cf-29n then a CF-74G, Cf-30F and last a CF-30k. As you can see it needed a clean wipe and start over. When I ran the CF-31 Mk1 restore disk I was flashes a message of it was not for this Computer. I made a copy using my CF-31A and then put the disk in the 31G and it will not start. HELP... Thanks
Dale
-
Will not work,you need the Mk2 disc I believe. Which I have somewhere.
-
Make sure the hard drive is set to SATA AHCI not compatible on the bios for both machine. To make it sure, set both machine into default setting.
ohlip -
Model Number:
CF-31GG2EA1M
Status:
DISCONTINUED
MSRP:
$4,688
Description: Win7, Intel Core i3-350M 2.26GHz, No vPro, 13.1" XGA Touch, 160GB, 2GB, Atheros WiFi b/g/n, No TPM, Bluetooth, Lightweight Battery, GPS, Gobi, Dual Pass (Upper:WWAN/Lower:GPS), Emissive Backlit Keyboard, No Drive, Toughbook Preferred
Your G model is still a Mk1 - just the economy version with the i3 processor. If it was a Mk2 it would have a 2xxx series processor and be a 31J thru 31R model. Ohlip always gives great advice and probably has pinpointed the solution. If you still have a question, call Heartland and give them your model and serial number. For $35 they will overnight to you the correct restore disc. Good luck.toughasnails and Shawn like this. -
Groovy,my mistake. I have the Mk1 disc also.
CF-31G w7 mk1 restore will not load.
Discussion in 'Panasonic' started by dale z, Jun 8, 2016.