CF-C2 mk2 enable WWAN in bios and option kit password

Hello I have a CF-C2CCEZXCM US MODEL inside already fitted sim slot, antenna ,I try to fit a gobi3000 EM7305 borrowed from a CF-AX3 but it not recognize , is missing the option in bios "enable wwan"
can someone point me to some solution to patch bios to enable it or give way to find password ,I have dumped bios image with AMI tool and also reading the KH25L12873FM2 flash with programmer but not found any info about it.

 

https://dl.dropboxusercontent.com/u/77027186/SPGOBI2-transfer_ro-30mar-62f92f.zip

 

I did try spgobi2......... but say "this tool only work w calpella cpu based systems" this mk2 have i5-4xxx
should be need a spgobi3 for gobi3000

 

Do you have a password locked accessories menu in BIOS?

 

I have "optional kit configuration" and ask for password

 

I know it's prohibited to discuss bios password, but I don't know whether it covers optional kit configuration too )
So I can write this password here if moderator doesn't kill me after that )

 

please send PM I have the pc here to try...

 

Thanks it works! I see on my cfax3 where I take in borrow the card,pcinfo show wlan id "15" so I put it in cfc2 bios 15 ,and windows8 connect on 4G ! 47MB SPEED TEST !!! awsome
do you think this also not panasonic but same model em7305 will going to work??

http://www.ebay.it/itm/Sierra-AirPr...993?pt=LH_DefaultDomain_3&hash=item2591465e89

 

I think it's too complicated to install "foreign" gobi cards. Maybe it's easy with new platforms, but I wouldn't spend my time

 

this from EU and is unlocked ,I will buy and try...

http://www.ebay.it/itm/Sierra-Wirel...ng_Mobile_Breitbandgeräte&hash=item566b716363

 

EUR 160
I'm moving to Italy ))

 

come come.. u r welcome ,here need good guys which understand electronic

 

Really this one is ok since we are really not breaking into it...since we do have the password.

 

Ok, looking for a good employer )
Maybe this summer I will travel there on my Honda Transalp

fine, because I like this forum )
optional kit configuration password is toughkit

 

hi all
I want install wwan card on my FZ-G1 MK1 but "optional kit configuration" password asked,
can you help me plz?

 

You did not pay attention to the post before yours...

 

perhaps something is/was lost in the translation ?

 

thanks for PWD, if you want travel you should have a Honda airplane lollllll

 

hi
the card WWAN MC8355 was installed with WWAN ID 04, on device manager the card is reconized 'HP un2430 mobile Broadband Module' ,

 

hello guys, please help, I have a new CF-C2ACAZX1M and just installed sierra wireless MC7750. I tested the card on CF-C1 and works but I cant seem to have any success on the CF-C2. It just does not seem to see the card in Device Manager. The current WAN ID in bios is ff, what I am doing wrong?

 

hi, try with wwan ID 04,

 

Thank you so much!!! It worked for ID 4 (no 04 available) but unfortunately Verizon won't register the card, they said that Sierra build in cards are no longer supported by vzn network!!! That really sucks since I wasted about 2 days on research.

 

Hello, I try to install EM8805 from fujitsu in my CF-AX3 but none of the driver detect the card, I think the card shall be activated in the bios but I don't have the password, is it possible to send it via personal message ?

 

Sorry, I don't read all posts, I have opened optional kit configuration but can you help me to setup the WAN ID for my card (EM8805) ?

 

You still have a chance.

 

It will save you a lot of trouble by purchasing a card from a Toughbook. Other brands cards such as Fujitsu are difficult if not impossible to get working in a Toughbook. Two posts above yours gives you a wwan ID to try.
I will not re type it.