The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    CF-H2 digitizer pen issues... anyone else?

    Discussion in 'Panasonic' started by julrich, Oct 23, 2013.

  1. julrich

    julrich Newbie

    Reputations:
    0
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    5
    I have about 30 CF-H2's in our environment and a majority of users at one point or another have reported problems with the digitizer pens or the screen becoming extremely sensitive to the point that the pen is interacting with the screen when the tip is an inch or 2 away from the screen. Other strange things happen, like putting the pen on the keyboard one time will enter the letter highlighted about 5 times... all seems digitizer driver related to me...

    I've replaced several pens, but I don't think the issue is with the pens. It seems more like a driver misbehaving occasionally.

    Most people will just flip the pen over when the digitizer end starts acting up and then within a few minutes, they can go back to using the digitizer end normally.

    Just checking in to see if anyone else has experienced these types of issues. I've sent one of the units back to panasonic and they replaced the pen, as I'm assuming they tested the screen and didn't find anything wrong with the hardware.

    Thanks-
    James
     
    julrich, Oct 23, 2013
    #1