Used the fingerprint reader port.
BEWARE it is 3.34 volt and NOT 5 volt.
5 volt is standard for usb ports.
3.34 volt seems to work fine for my wireless mouse.
CF 19 fingerprint wiring is what I used.
The enable pin needs grounded in order for the BIOS to enable the FPR port.
The one corner of the new usb port needs trimmed. I think it could be trimmed a bit more than I did.
I used a 12 pin ffc and breakout because I already had them.
An 8 pin breakout and ffc cable is all that is needed.
CF 19 FPR schematic
![]()
![]()
as promised
![]()
![]()
![]()
![]()
-
-
toughasnails Toughbook Moderator Moderator
Very nice job Shawn
katalin_2003, custom90gt, Dannemand and 1 other person like this. -
Thanks!
-
Voltage test.
CF-U1 2nd / second usb port
Discussion in 'Panasonic' started by Shawn, Oct 27, 2018.