CF-VKBLxxx questions

I was wondering if anyone has the part numbers for the pany original cords for this series of keyboard. I noticed in the user manuals they show four cords.

One for PS2
One for Fn function
One for Y splitter
One for PS2 to USB

Anyone have a clue. I am in need of the coiled PS2 and the splitter.

I have had luck finding male to male cables but none with the right angle connector and I have found the Y splitter but in wrong configuration. I need two male and one female for Kodiak dock.

I found this pinout in thoughts of making one but was not sure if I could just do this in reverse.

PIN PIN SIGNAL
5 H 6 1 Data 1 ----------------------- 1 Data 1 6 H 5
3 4 2 Data 2 ----- - - - - - - - - - 2 Not Used 4 3
1 2 3 GND -------------------------- 3 GND 2 1
Male 4 VCC (+5v) -------------------- 4 VCC (+5v) Female
End 5 Clock 1 ---------------------- 5 Clock 1 End (1)
6 Clock 2 ----- - - - - - - - - 6 Not Used
||||||
| ||| PIN SIGNAL
|||||---------------- 1 Data 2 6 H 5
| || - - - - - - - - 2 Not Used 4 3
||||----------------- 3 GND 2 1
| |------------------ 4 VCC (+5v) Female
|-------------------- 5 Clock 2 End (2)
- - - - - - - - - - 6 Not Used

I was able to get keyboards to work but used two PS2 to USB connectors with usb cable in between. As stated in earlier threads this disables the touchpads on the VKBL.

Edit: I have found that it looks like in order for the touchpad to work the cable needs to be fully popullated. The cables I have only use pins 1,3,5,4,& the shield. Can anyone verify that the cord that comes with these from pany for the key board in PS2 is fully popullated?