Hi, I'm a newbie on the toughbook scene and recently bought a CF-18 and imaged the 40GB drive onto a 160GB IDE HDD and fitted it onto a different caddy that I had aquired, so that I could swap drives for home & office use
After fitting the new drive the CF-18 won't power up any more, even with the original drive - no power light or indicators come on, its just totally dead
The power supply is OK, checked it with a friends CF-18
any help would be much appreciated
Thanks
-
Take out hard drive/caddy, battery, and remove any additional ram that is removable from under the bottom speaker cover
Then try to boot into bios
Alex -
Thanks Alex, it was as simple as that - everything is working perfectly now
I'm very very glad I didn't need to strip it down
Thanks again for your help
Kevin -
Glad that worked.... I just got in a few 1.2GHz CF-18s and I foud one that will charge the battery but not run off the battery. When I try to turn it on... The screen brightness control buttons on the front right blink... And I can hear a faint clicking noise. I'll have to take it apart tomorrow and see...
Dead CF-18
Discussion in 'Panasonic' started by kjwudsph, Sep 20, 2009.