How to calibrate my touch sreen? CF-19CHGAXBM

Hi all,

We have two CF-19's at work one is almost wornout, the other we recently got as a used unit.

The used unit is the model number in the title.

This used unit has had win 7 ultimate installed and all seems to work just fine, but the touch screen needs to be calibrated,(is about an inch off) which I can do easily on our original unit running XP, but I cannot even find the cali tool on the win 7 unit?

I looked in-

Hardware and sound-

but cannot find tablet pc settings or calibrate the screen for touch input

I looked in Device manager, and under human interfaces can see 'Fujitsu Touch panel (USB)'

But dont really know what I am doing.....

Obviously I dont know much about computers, I fix ATV's not PC's

Also looking at purchasing one new CF-19 for our Ford dealership any comments on this one on ebay?

New Panasonic Toughbook CF 19 MK6 Rugged Touchscreen Model | eBay

Thanks

Jared

 

Does it have just the windows 7 touch drivers installed, or have they been updated with the Panasonic drivers?

Go to START, CONTROL PANNEL. Then look for Tablet Calibration and see if it's there.


On that unit contact Rob here on the forum. He is a good guy to work with and works for Tough Depot.
~Toughbook Talk~ Toughbook Discussion • View forum - Rugged Depot & Robs Toughbooks B/S/T Forum
That is just a few of what he can get, he can also deal directly with Panasonic if needed.

 

Looking at my CF-30 it can be found at START / CONTROL PANNEL / TABLET PC SETTING. When you got this 19 did it have W7 on it or did you put it on. Why I ask is to run W7 on a CF-19MK1 you must update the BIOS . Sounds to me like you are having a few driver problems.

You can get all the drivers here Panasonic Toughbook Computer Support Downloads . Look under CF-19MK1 Vista upgrade

 

Have had a look there today in control panel, even searched the word tablet in the control panel and came up with nothing.
I downloaded some win 7 drivers from a link in another post here, when I went to install them got the 'already installed' notice pop up, reinstalled anyway but no different.

Did you mean talk to Rob re my screen or re new laptop?

thanks.

 

Will check it out thanks.....

 

W7 was already on it when I got it.

 

Ok so now we need to know which bios you have on it . F2 on startup and let us know what version you have.

 

Talk to Rob about the new Toughbook.

 

Sometimes calibrate is in the MOUSE settings.

 

From "http://pc-dl.panasonic.co.jp/cgi-bin/itn/toughbook/dl01.cgi"

Please record the bios and ec number if you do this for other users. There are two bios and ec for CF-19....this is a quote from the instruction manual from the jp site. Note the ..70207.exe.

Why? Because W7 is looking for a tablet as does Vista. Your posts indicate you have a Touchscreen bios.

Hope this helps.

 

Touchscreen and Tablet are NOT the same thing........Important to remind people of this. Tablet is a digitizer and requires a capacitive stylus. Touchscreen will work with a finger. Preferably your own finger.