I have an older copy of some software on my CF-30 that I would like to run on my CF-53. Windows 7 32 bit runs on both computers. I am going to attempt to take the HDD out of the CF-30 and drop it into the CF-53 (I have a backup in case of total failure). Anyone attempted such a migration before?
-
-
steve.steve Company Representative
Shouldnt have a problem unless you are putting the drive into a cf-53 mk4
Wyoming88! likes this. -
toughasnails Toughbook Moderator Moderator
It's worked for me before but every so often I will get the "blue screen". My guess it's the video or chip set drivers that caused it. Can't hurt to try
-
here is a tip.
install the driver bundle for the new machine while hdd is still in the older(first) machineinterestingfellow, kode-niner, UNCNDL1 and 1 other person like this. -
BSOD, even in safe mode. I’ll try the driver update while in the CF-30 and see what happens.
Sent from my iPhone using Tapatalk -
Fix HDC from Hirens will help
-
toughasnails Toughbook Moderator Moderator
Check it out here. I have not used it for years but when I did it worked awesome. Lots of tools to use. You can make a CD or USB...I use a USB.
https://www.hirensbootcd.org/ -
Acronis image then use the install on different hardware tool.
-
You may find that Windows will force you to reactivate as well.
interestingfellow and Wyoming88! like this. -
Is this possible?
Discussion in 'Panasonic' started by CF-28 Frankenstein, Aug 15, 2019.