The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Sony GXB5005 GPS pin-out

    Discussion in 'Panasonic' started by SHEEPMAN!, Mar 27, 2012.

  1. SHEEPMAN!

    SHEEPMAN! Freelance

    Reputations:
    879
    Messages:
    2,666
    Likes Received:
    517
    Trophy Points:
    131
    I have found a bunch of data sheets. They are some help but do not include the pin-out for the connector on the PCB.
    I've located Tx, Rx and Gnd but Vcc (Vdd) is frustrating me. It's pin 17 but what number on the cable connector?
    I'm using a cable a certain very fine gentleman in BC sent me and intend to pull the em-408 plug and install fpc. Come to think of it since this is a pilot model I'm going to graft a fpc in and keep the plug. :)

    The pin-out for the 1301Z (HSDPA) connector....the one on the bottom of the card would probably answer the question.

    Thanks,

    Jeff ....o.k. I'm putting a CF-30 GPS in a CF-29 for the curious... :)
     
    SHEEPMAN!, Mar 27, 2012
    #1