The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    ToughBook CF-19 MK2 touchpad to CF-19 MK7

    Discussion in 'Panasonic' started by scpres, May 26, 2019.

  1. scpres

    scpres Notebook Consultant

    Reputations:
    0
    Messages:
    106
    Likes Received:
    10
    Trophy Points:
    31
    I have transferred a working touchpad from MK2 to MK7 successfully because the on in MK7 is damaged. Unfortunately the direction becomes reverse. when I hover my finger to the right the arrow will go to the left and when to the top it will go to a different direction? is there any chance I can fix this from registry?

    Thanks guys.
     
    scpres, May 26, 2019
    #1
  2. steve.steve

    steve.steve Company Representative

    Reputations:
    6
    Messages:
    202
    Likes Received:
    92
    Trophy Points:
    41
    Sorry the cf19 mk6 and later uses a interlink or intermac touchpad. So earlier generation touchpads won't work. The one you need is a bit hard to come by.
    Steve
     
    Last edited by a moderator: Jun 19, 2019
    steve.steve, May 26, 2019
    #2
  3. scpres

    scpres Notebook Consultant

    Reputations:
    0
    Messages:
    106
    Likes Received:
    10
    Trophy Points:
    31
    is there any chance to change it in registry?
     
    scpres, May 26, 2019
    #3
  4. steve.steve

    steve.steve Company Representative

    Reputations:
    6
    Messages:
    202
    Likes Received:
    92
    Trophy Points:
    41
    Assuming the driver has that option written in you would change in registry. Or write your own driver.
    So most likely no, but i don't know for certain.
    Steve
     
    Last edited by a moderator: Jun 19, 2019
    steve.steve, May 26, 2019
    #4
  5. Shawn

    Shawn Crackpot Search Ninja and Options Whore

    Reputations:
    1,541
    Messages:
    8,306
    Likes Received:
    2,050
    Trophy Points:
    331
    No registry cure that I ever found.
    I did find a hardware cure, but it's a bit involved. Need to transfer the 2-x axis and the 2-y axis wires coming off the touchpad itself.
     
    Shawn, May 26, 2019
    #5
    toughasnails likes this.
  6. Geraout

    Geraout Notebook Consultant

    Reputations:
    9
    Messages:
    249
    Likes Received:
    56
    Trophy Points:
    41
    Could you transfer the mk2 touchpad pcb as well?

    I ask as I transferred a mk4 motherboard into a mk6 case which included the touchpad and pcb and it worked propwerly.
     
    Geraout, May 27, 2019
    #6
  7. Shawn

    Shawn Crackpot Search Ninja and Options Whore

    Reputations:
    1,541
    Messages:
    8,306
    Likes Received:
    2,050
    Trophy Points:
    331
    Won't work. Already tried.

    http://forum.notebookreview.com/threads/cf-19-mk2-motherboard-swap.806826/#post-10562587

    http://forum.notebookreview.com/thr...board-swapping-question.812762/#post-10662904

    http://forum.notebookreview.com/thr...ion-site-edition.785766/page-14#post-10525154

    http://forum.notebookreview.com/threads/cf19-motherboard-swaps.808530/#post-10592856

    http://forum.notebookreview.com/threads/cf19-parts-interchange.803156/#post-10496710
     
    Last edited: May 27, 2019
    Shawn, May 27, 2019
    #7
  8. scpres

    scpres Notebook Consultant

    Reputations:
    0
    Messages:
    106
    Likes Received:
    10
    Trophy Points:
    31
    Thanks

    Anyways I have a toughpad Fz-G1 mk1 not working but in perfect condition. And I want to swap the screen to mk2? I don’t know how to remove the clip of the screen connection. Any guide would be appreciated.

    Also the one in mk2 has a dirty fan so I want to swap everything to mk1 body? Would that work? Because mk1 is as new condition but it doesn’t boot up?


    I did not try it. As It’s a bit complicated? I got 9 mk7 and mk6 bargain. So far I tested 5 mk7 that’s works great. And two has a touchpad problem I’m happy just making it work like new in windows 10.
     
    Last edited by a moderator: May 28, 2019
    scpres, May 27, 2019
    #8
  9. scpres

    scpres Notebook Consultant

    Reputations:
    0
    Messages:
    106
    Likes Received:
    10
    Trophy Points:
    31
    I have attached the pictures for reference. Thanks guys.
     

    Attached Files:

    scpres, May 27, 2019
    #9
  10. bubu782001

    bubu782001 Newbie

    Reputations:
    5
    Messages:
    1
    Likes Received:
    1
    Trophy Points:
    5
    For all that you have problems with inverted axis (as moving from original touchpad model N2EAYYY00022 to older touchpad model N2EABEC00006) you can resolve this problem with Sakasa Mouse. This small utility that works instantly after is run (Work on XP, 7 and also 10). It can be used as startup programs and you will have instantly mouse working perfectly after Windows start.

    N2EABEC00006 has the advantage is more easily to find and also is much more cheaper.

    I dont know about Linux but i'm sure there is an utility for penguin lovers too. :)

    You can get it from HERE http://hp.vector.co.jp/authors/VA026826/sakasa103.zip

    For all sw that RESOLVE this problem look at this page: https://www.pcgamingwiki.com/wiki/Glossary:Invert_Y-axis
     
    Last edited: Dec 22, 2019
    bubu782001, Dec 22, 2019
    #10
    Shawn likes this.
  11. Shawn

    Shawn Crackpot Search Ninja and Options Whore

    Reputations:
    1,541
    Messages:
    8,306
    Likes Received:
    2,050
    Trophy Points:
    331
    great tip.

    @toughasnails
    Can that last tip /post be copied to CF 19 and CF 31 FAQ's?
     
    Shawn, Dec 24, 2019
    #11
    toughasnails likes this.