cannot calibrate toushcreen cf19

toughbook CF19 KHR

I have a problem with toushcreen
The computer was under windows 7 and worked very well,

I have installed fresh xp sp3 with all the drivers (down from panasonic website)

I have a problem to calibrate the toushcreen,
When I launch the utility calibration
I can not reach the first red point calibration,
I click on the point with the stylus but the cursor is offset by 1 cm, impossible to go to the next point,

i try with another stylus, some problem

all drivers is ok , mousse is ok...
Please is that someone has a solution,

help me please

 

Stylus doesn't matter in this touchscreen only model.
Try to find a place near the first point to make it move to the second one etc. Save results, repeat calibration...

 

Verry thks for reply me.
It's really complicated. I really can not touch the calibration point,
I just want to know what can cause this problem

 

Don't try to touch the exact point. Find a place as near to the first point as possible. It can be 1-2-3cm - not that important for the first time.
Do I understand it right, you are using FPSCal.exe for calibration?

 

Change to touchscreen in bios. (not tablet nor auto)

XP = touch
W7 = tablet

 

Device Manager should show Fujitsu USB device under "hid" tab.



For W7 it should show two hid devices under "hid" (human interface device)

Sometimes booting the device twice seems to help clear the W7 numbers from the registry.

 

Thks for all member.
I Change to touchscreen in bios, and i calibrate it.

Now is good work fine.

Thks for your help.
Good day

 

Jeff..aka Sheepman saves the day again.