hello everyone! i have a big problem with my cf-18, i have disabled the touchpad, the touchscreen work fine for 1 hour and then the mouse moves alone and click and move repeatly! i have perfectly cleaned the screen but it is not a cleen problem! please help thanksp.s. sorry for bad english (im from italy), great forum
-
Hi! you haven't mention which part of the screen did you cleaned it up. It must be between the screen bezel and the ts glass. Also would you mind to post your model no. pls. so that we know what option do you have. Maybe you have an OEM gps that why your mouse acted like that.
ohlip -
CF-18DHB22KA
yes i have read the another treads but this dont help my! i have cleaned inside outside and at the edges! this model has a capacitive touchscreen! now the mouse is alweys in a exact point and if i touch in a another point then the mouse moves to this point and returns to the another previous point, boh -
bad touchpad. this happened to me and after I replaced the touchpad, it was fine.
-
I believe I saw in another thread that you can troubleshoot for this by unplugging the touchpad and trying the touchscreen again. I'm not sure if you can do the same thing by disabling the touchpad in Device Manager - I believe both Touchscreen and Touchpad use 1 integrated driver. Of course, you'll want to verify you have the correct driver set first, etc...
mnem
Toughbooks driving me crazy? Heh - for me it's a short walk, no driving needed... -
If its not on the screen. As Doobi and mnem...said its your touchpad. But before you dismantle the touchpad try cleaning it first specially those edges and beneath also if you have a worn or cracking surface. It is one of the cause.
ohlip -
Check your touchscreen connector and if that doesn't work... Uninstall and reinstall your driver... I had an issue with this too.
Oh... And you may want to try cleaning around the inside edge of the touchpad too. The thing is that dirt gets stuck between the frame and the touchpad... Then when you touch the screen it fights the touchpad for control... The screen usually wins... As long as you are touching it... Then snaps back when you stop touching the screen. -
hi guys, thanks for the help but my touchscreen still dont work! i have try to remove the touchpad, to disabling it but the error is always here! i have try to uninstall the driver, to install another driver but the error is always the same! i have the right driver installed of course
cf-18 mk2 touchscreen issue
Discussion in 'Panasonic' started by simyz450f, Apr 8, 2009.