The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    cf-19 mk1 w/windows 7 touch screen issue

    Discussion in 'Panasonic' started by Nhfire77, May 18, 2011.

  1. Nhfire77

    Nhfire77 Notebook Enthusiast

    Reputations:
    0
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    5
    Hello all!

    I recently purchased a refurbished cf-19 mk1 ( model cf-19cjaxbm ) It has a new copy W7 Professional refurbished installed. Everything works execept the front buttons. Thats ok with me but if you know how to fix that let me know.

    But the bigger issue: The digitizer screen with the pen doesnt align properly. I guess it needs calibration? I have read other threads and attempted to install different drivers unsuccessfully.

    I really want to get this going, what can I do?????
     
    Nhfire77, May 18, 2011
    #1
  2. Nhfire77

    Nhfire77 Notebook Enthusiast

    Reputations:
    0
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    5
    OK,

    So I should have titled it digitizer issue. Now that I've learned what the tablet PC buttons are for, I really do want to use them.

    I've read all the stickys and big posts, what do you do with an installed from scratch w7 pro?
     
    Nhfire77, May 18, 2011
    #2
  3. Doobi

    Doobi ToughBook DeityInTraining

    Reputations:
    414
    Messages:
    1,005
    Likes Received:
    1
    Trophy Points:
    56
    read the thread on installing win7 on a cf18 and follow the order of install for all the panny drivers. If you have already installed the drivers, deinstall them, and reinstall them in the proper order. if you do not follow the proper order, your functions will not work properly. following that thread, i successfully installed win7 on my mk1 cf19 digitizer and everything, everything, works properly except the auto-rotation of the screen when turned. I can rotate the screen via the front button though, so no big deal for me.
     
    Doobi, May 19, 2011
    #3