The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    cf-29 problem

    Discussion in 'Panasonic' started by shamrock442, Dec 14, 2009.

  1. shamrock442

    shamrock442 Notebook Enthusiast

    Reputations:
    0
    Messages:
    15
    Likes Received:
    0
    Trophy Points:
    5
    i recently got a cf29 everything worked ok for a day or so now the screen after you boot up starts to flash the following : intel undi, pxe-2.0 (build 082)
    for realtek rtl8139(x)/8130/810x/pci fast ethernet controller v2.13 (020326)
    pxe-e61: media test failure, check cable
    pxe-m0f: exiting pxe rom

    any help or advice would be greatly appreciated also it came with a 40 gb hard drive that i would really like to upgrade to as big as one as possible also only has 512 mb ram built in supposedly only can upgrade to 712mb max ram was wondering if there is a way to increase ram and wanted to get backlit key board. thanks in advance for any help or advice.
    Mike
     
    shamrock442, Dec 14, 2009
    #1
  2. capt.dogfish

    capt.dogfish The Curmudgeon

    Reputations:
    903
    Messages:
    2,328
    Likes Received:
    55
    Trophy Points:
    66
    Mike,
    I'll be the bad guy this time.
    1. You have posted a question in the Buy-Sell-Trade section of the forum.
    2. The very first posts on this forum, called stickies and labeled "READ BEFORE POSTING"will answer all of your questions.
    Take a look at the stickies and come back with your questions.
    Welcome to the forum!
    CAP
     
    capt.dogfish, Dec 14, 2009
    #2