The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    [W230ST] Taking Housing off / replacing EDP cable

    Discussion in 'Sager and Clevo' started by Patryk38, Oct 28, 2015.

  1. Patryk38

    Patryk38 Newbie

    Reputations:
    0
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    5
    Hey guys,

    I'm in need of someone who ever has had took the housing off of the Clevo w230st. I have to replace EDP cable, but I have no idea where should i start of with taking the housing off. Anyone?
     
    Patryk38, Oct 28, 2015
    #1
  2. t456

    t456 1977-09-05, 12:56:00 UTC

    Reputations:
    1,959
    Messages:
    2,588
    Likes Received:
    2,048
    Trophy Points:
    181
    Sure; remove bottom cover and every screw you can access from the bottom. It'll hook behind the VGA port, so nudge it sideways there. You'll need to remove keyboard as well, but that's easy; button/led bar has no screws, pry it loose and unscrew the four screws underneath and keyboard is free.
     
    t456, Oct 28, 2015
    #2