I want to have fan control on my Eurocom M570RU DIVINE-X (I searched for about 30 minutes and couldn't find the answer anywhere) but the latest Eurocom BIOS doesn't include it (but the Sager one does).
Thanks for the info!
-
You can download it from Sager.
-
they are all Clevo's... regardless of what splash screen comes up.
-
Makes sense, just wanted to confirm.
Does anyone have a link to the latest Sager BIOS with fan control?
I've searched everywhere and all I found was drivers, dead rapidshare links on this forum, and posts saying to email Sager tech support requesting the file (along with your serial number which I won't have). -
-
i have them ill upload them tonight when i get home for you
-
bios link: http://rapidshare.com/files/227353012/57RU_12.zip
firmware link: http://rapidshare.com/files/227353736/57RUEC10.zip
both are the newest most current for your model. it should not matter if its a sager or not. all the clevo bios are the same possibly eurocom removed it for some reason?? not sure. i do have the sager / style note one though but its a lot older..
did you flash BOTH the bios and keyboard firmware? you must do that for it to work -
Thank you very, very much! I will flash them both now and test it out.
-
@zfactor, batmaniac said he wanted fan control, so he needs a sager specific firmware. I pm'ed him the sager .09s kbc which should have that in it.
-
i used the non sager in the past and it had fan control. so why would they have removed it?
i also had the .09 but i wanted to send him the newer one.
either way he is covered.. let us know if you need anything else -
I use the official .10 (+.12 bios) and it does not have the fan control
-
i know back when .08 was out they both had it.. i figured the newest ones would also.
Any issues with flashing the Sager M570RU BIOS to my Eurocom model?
Discussion in 'Sager and Clevo' started by Batmaniac, Apr 27, 2009.