Clevo 8800M GTX New BIOS (D901C & M570RU)

Important: All of you pleople that have Geforce 8800M GTX graphics card in
Clevo laptop (D901C or M570RU)
If you have different version of 8800M GTX BIOS from these ones:

62.92.23.00.04
62.92.23.00.12
62.92.23.00.14
62.92.34.00.08
62.92.40.00.18

PLEASE UPLOAD IT HERE...

I ask you to do this because this way we can be able to find
some bios version that may allow us to overclock our cards much
more..

 

Would like to contribute but I got 34.00.08
Whith version has worked the best for you?
what kind of clock have you gotten out the best?

 

the very stable is 34.00.08 for now with most stable clock at
Core: 630-650
Shaders: 1600-1650
Memory: 980-1050
but 8800M GTX are capable to take much more higher clock we can
do this if we are able to find bios that allow us actually change the voltage
to 1,10 or 1,15

 

650/1650/1050 ? ARE YOU SERIOUS ?
You have to up the voltage a lot for that much, and I don`t even want to think what an SLI rig will have to endure in terms of heat...

 

Mine isn't even stable at 600

 

the heat is not a problem for D901C not even close to issue
BIOS version 62.92.34.00.08 at clock
Core: 630
Shaders: 1600
Memory: 980
in Crysis 2 hours of playing my max temps never exceed 58C
i have very good custom external cooling + laptop fans at max
i never reach 60C in SLI
i even manage to clock it to

Core: 680
Shaders: 1750
Memory: 980
in bios version 62.92.40.00.18
but this version have some bugs i think because after a couple of minutes
the video driver stop to responding and game freeze for few seconds
i try it with 4 diff drivers the effect it the same even with stock clock
and with these clock the temps in Crysis are the same even i manage to play only 15min without a crash

 

that way i look for other bios version because this version 40.00.18 is capable to change the voltage but is not stable even in stock clocks
if there is a version like this that dont have this problem we will be
able to overclock our card more than..
Core 700
Shaders 1750
memory is not effected by the core voltage but can be clocked stable
to 1050 even more maybe

62.92.40.00.18 this version is very new and i think that it has to be some other version with new
buyed laptops if some one that have buy D901C recently probably have even more newer version
than this one maybe without the problem

if you dont believe me for the temps this is my custom cooling the fans are below laptop fans
and blows cool air right into them

 

That is just unbelieveble.
Under 60C ? WOW , seriousely WOW.

 

Whats ur BM scores in that Gangsta?

 

BM ??? what do you mean
and i dont have a time now because time here now is
10:30pm and i have to wakeup tomorrow early
will be here then

 

Benchmarks

3dmark06 etc

 

With SLI and those clocks,and his quad, I`d say 15k at least.

 

what clocks are you running on your gfx currently gangsta one. ?? im running the clocks that you and mlongrie gave me couple of weeks ago.. everyting is running tickety boo..!! is it possible to go higher with the same voltage settings..??

 

tickety boo?!?!?! Is that good or bad? It sounds bad............like something you do not want to hear from your hard drives or fans

 

in 3dmark06 i get 13500 - 14000 with the same bios and clocks
some of you can get more or less my clock are set at
Core: 630
Shaders: 1600
Memory: 980

 

and please people ask the guys that you know to upload their bios here

 

Veeery nice! Have you been able to OC the CPU as well? The last thing I recall reading on that viz. the Q6700 was that it was not (yet) known how to OC it, as opposed to the Q6600.

 

misleading topic............

 

Um, sorry to hijack, but since we are on the subject....

what happened to Dexgo?

 

probably fried his 9262 and couldn't get online anymore.

 

haha no no tickety boo means all is well heheh

 

for bios overclock dexgo know all from me if you dont know that
first ask me to help him and then post a topic like he do all the work

 

How hard is it to replace the CPU in the D901c?

 

very simple

 

Then how about you get a Q6600 ?????

 

why when overclocked q6600 at 3Ghz is fast like not clocked q6700
and i think to replace mine with Q9550 or Q9650

 

How was dex able to get 13-14K with one card then?

 

I'm in testing with both .34 and .40 with 175.75 (and 177.35) with system tools nvidia 6.02 (Oc separately gpu shader and mem)...

 

is able to do this because i give him the modded bios and explain to him
how things work

 

At 630 1600 980 on my Clevo M570RU crashes with both .34 and .40
At 623 1600 980 seems stable!!

 

I second this motion.

 

Hi,

I also belive that D900/901C is the fastest laptop on this planet, but why Dell 1730 is on top in 3DMark06 and 3D Mark Vantage on Futuremark web site for 8800M GTX? Any ideas? Mayby it's a stupid questions but can somebody explain? Ok cards are the same 8800M GTX SLI but were is advantage in 1333MHZ FSB and Quadro Cores and 800Mhz RAM? Looks like OC settings are on the same level?
Top is 15009 3D Marks.

 

Hi Oile,

whats your 3D mark scores (06 and Vantage) with this clocks?

 

I'm in testing yet, I cannot say anything until it proves to be stable at 100%.. around 1050 3DMarks (Pc in signature)...

 

I have a E8400 cpu, which maybe causes a limitation for oc due to 1333 FSB? Got bios and plenty of help from GanGstaOne [thanks man]. Using 34.00.08 modded for 1.05v. Spent about four hours last night trying to max the 8800 SLI speeds. Setting memory clock low, I found that the best Core/Shader speed combo was 630/1470. Memory clock was then moved up to 630/1470/950 result. I then tried pushing each of these numbers individually by +3, and each addition resulted in a crash [hangs] in the hollow log area of the forest section test of 3dMark. Note: it is also stable at 574/1480/899. So an increase in shader forces large decreases in core and memory.

My best PcMark05 to date -> 8920. And my best 3dMark06 run is 14,268.
If I could press an oc on the E8400, I'm sure that I could break into the 15K.

Is there a 1.10v modded Bios available for testing?

 

Test results at 574/1480/899 for 3dMark06 is about 14178... So the gain from this setting to 630/1470/950 is only 90 points in this test....

 

Stupid question of the day:

Where can I get the BIOS which allows overclocking on my D901C (Q6700/8800GTX M)?

 

I would like to know this too. It seems the folks that have the Q9550 now and 8800GTX SLI are breaking or very close to 14k but it also seems the Dell folks with the X9000 (not quad) OC'd are getting closer to 15k. Does that mean that the Dell PC is still faster than the Sager despite the quad? It would seem even with a lower clock the processor in the Sager should be much superior with twice the cache etc..

I have seen some scores from "3d vantage" I think it is that had the Sager ahead by a bit... still confusing..

 

Hi,

My best 3D Mark 06 run is 10584 with GPU OC to 600 1500 900 and CPU OC to 2.625GHz (yes, both GPU and CPU OC) but with this settings Crysis crashes after app. 10min (GPU temp 77deg C) of play and fps increase is very little (max 1fps) comparing to GPU OC (600 1500 900) only. I've never try to run 3D Mark 06 with CPU OC only, but score might be higher according to Nirvana's research. 3D Mark Vantage score with GPU OC only (600 1500 900) is P4108 (CPU5071 and GPU 3863), don't know really if this score is good or bad for my rig.

 

hey people please upload your bios dont talking about things that
are discussed many many times in this forum

 

I second that.

 

Sorry GanGstaOne,

you have mine ver 62 92 23 00 14 anyway, I was just wondering reading your thread and hoping that you can explain that as you are the expert and owner of D901C.

 

WawidOku what do you want to explain overclocking this thing is different
for every card and bios you the basic is that you just have to playing
with bios very long time and do many test to realy know what can and cant do your card and bios version...
i will try to explain

 

what about upping ALL bioses listed in the first post?

it would make this thread worth taking a look but 5 pages and not even 1 bios is lame....

i'd like to test out (at least some) of the bioses listed on the first page....

GO GO GO UP THEM BASTARDZ!!!!!!

 

Now our card can be clocked at very higher something like
Core: 700-800
Shaders:1750-1950
Memory:1000-1100
but for every card is different as i say but the basic is this
now with bios version is other thing our bios version is locked for max voltage 1,05 and this allow as to clock little more than 600-1500 (memory is not affected by the Core voltage)
but with little playing with bios we can go up to:
Core: 630-650
Shaders: 1600-1650
this can be done by set higher voltage in voltage table where is set 1,05
we set it to 1,10 or 1,15 this not affect the core real voltage it stay at 1,05
but allow us to go little more higher than clocks for 1,05 voltage
this way we just lie the bios i dont know how to explain in other way
but i dont think that this will do with all cards
this is allfor our card overclocking if some one of you want clocked bios
just want it i will give you with what clocks you want
but i recommend to use this one is most stable version and
probably will work stable for most of you

http://rapidshare.com/files/123387132/3408.rom.html

 

do you have other v-bioses as well? maybe you can .rar oder .zip them and upload them in a big pack?

rapidshare prem ftw

 

i tell you what versions i have..
62.92.23.00.04
62.92.23.00.12
62.92.23.00.14
62.92.34.00.08
62.92.40.00.18
but the most stable version is 34.00.08 support sli but can used with one card
with no problems
40.00.18 this version is have some bugs something is not right here i dont know what but this is most unstable version of all and when windows boot
system bios beep for error this is from video bios error

This is all version archived and uploaded

http://rapidshare.com/files/123389206/Clevo_8800M_GTX_BIOS_Archive.exe.html

i think that some one will upload not i

 

Thanks GanGstaOne,

I know what you mean. I think I know the reason, looks like Dell XPS 1730 owners can easily OC GPU and CPU together. Noticed that the top one (15009) is running CPU C2E at 3.4 and GPU at 665 ???? 975. Intresting...
Sorry again for spoiling your thread. Good luck!!! I hope you will soon break 15k!!!!

 

you can overclock the extreme cpu's via bios as well on the m570ru as far as i know...

but no other cpu's

 

I thought it's only up to 3.2MHz. It's not???