The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Clevo P650HS Liquid Metal Results

    Discussion in 'Sager and Clevo' started by Djommar, Dec 30, 2018.

  1. Djommar

    Djommar Notebook Enthusiast

    Reputations:
    5
    Messages:
    48
    Likes Received:
    23
    Trophy Points:
    16
    I just wanted to post my results using liquid metal in this chassis. I used Grizzly Conductonaut on both GPU and CPU.
    Laptop specs are:
    i7 7820hk
    GTX 1070
    32gb Ram

    CPU was running 4.3ghz
    And for firestrike CPU was 4.3ghz and GPU was +50 on core and +100 on memory.
    I was wondering if anyone else has had success with liquid metal in these chassis? I can't seem to get rid of the CPU differentials. GPU stays below 75 in firestrike runs. This was all using Max fan.
    [​IMG] [​IMG]

    Sent from my SM-G965F using Tapatalk
     
    Djommar, Dec 30, 2018
    #1
    boombyte and Vasudev like this.