Clevo X7200 XTU version

I want to OC my 980X
tried XTU from ASUS P6X58D's V2014316 but it just freeze there...........
where can i get a working XTU for X7200??
and should i upgrade my BIOS(6.00 07/30/2010)?
Thanks~~

 

Throttlestop.

 

thanks
but cannot adjust blck and memory.........
i want to set hyperx at xmp 1600cl9 and uncore 2400~3200

 

You can GET IT HERE

 

ok i tried this one
still stuck when the xtu logo appear.........
maybe somethings wrong with my machine
or the w7 x64 not supported bcz it installed at program files(x86)

 

Mine does the exact same thing so its not your machine.

 

The XTU software does work fine, think I had a couple of issues setting it up for the first time because of Admin rights in Windows 7 but there's not any incompatability with the OS afaik. That's with the version available in the link below of course.

If you're having problems with it crashing during auto tune then go into Windows in safe mode and re-set to defaults.

 

I flashed to the latest bios and ec and mine works now?

 

980X 480M SLI?what BIOS version you got?32 or 64 bit OS?

 

Also freeze here when XTU Logo appears! Win7 64bit! Installed the Software as Administrator, run as Administrator! Latest Bios 05/03

 

Also try Running as vista sp2 compatible mode.

 

Yes, also a freeze!
Maybe the rams must supporting the Intel Extreme Memory Profile (XMP)! I see you use Kingston HyperX with XMP Support!

 

If all of this fails you may need to do a clean instal of the OS. Make sure when you do a clean install that you install the drivers in the proper order...

1. Chipset
2. Intel Storage - Intel Matrix Storage Manager
3. Audio Adapter
4. Video Adapter

Only then add other drivers and such...

 

Hi!

I have a clean install !! I know about this!

Best regards

 

Fixed for ya.

 

Hi!

Problem fixed!

With the official Bios from Clevo and the bios that is listed at the mySN Site XTU dont work! (Official 05/ KBC 03 Bios)!

With the 05cs Bios, listed at the Sager Site, XTU works correct!

Link to the OC Bios: Software Upgrade

Best regards

 

I think we were running BIOS 02 at the time - I posted that after 05 was released but would have been refering to testing before the release of 05. Would have been Win7 64 also. Looks like BIOS updates to 05 have sorted out peeps issues though We have never had any issues with XTU (apart from what I mentioned previously) but from what la.ultima said above there may be differences between what different companies are shipping in terms of BIOS revisions.

It should work on any type of RAM btw but of course depends on what clocks you are changing.

 

flashed BIOS to 05CS and it finally worked!!!!!!!!!!!
but a small strange things happened

though it is nothing to do with tuning

 

Just a note, for me the previous bios works best, bios 728bv02fs. This latest bios doesnt hold an OC, the OC has to be applied every so often, like after every 5 shutdowns or so