The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Disk Write Copy for Vista x64

    Discussion in 'Sager and Clevo' started by rob92801, May 21, 2009.

  1. rob92801

    rob92801 Newbie

    Reputations:
    0
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    5
    Hi all
    Just got my Sager np5797 this week and I'm enjoying getting started with it. Wonderful machine ... and very fast.

    As the OS I chose Vista x64 already knowing that Sandboxie would not run on it.

    http://www.sandboxie.com/index.php?WindowsVista64

    I went searching for an alternative and discovered Disk Write Copy by CCS Company ltd. There is a Personal edition and a Professional edition. If I understood the sites discussion correctly, the personal edition would not be of much interest to me. It restores to the point where you started the protection on the next reboot. The professional edition allows incremental protection. In other words (again, assuming I got this right) it permits changes made to continue through multiple reboots until the protection is deactivated and then restores to the point where the protection started.

    Here is a link to the site:
    http://www.diskwritecopy.com/eng/download_dwc.html

    If anyone has tried this software (30-day trial available), I would be very interested in your experiences.
     
    rob92801, May 21, 2009
    #1