The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    Laptop Bed Tray Table that will support np9377sm-a and a Mousepad???

    Discussion in 'Sager and Clevo' started by Brent R., Jul 16, 2016.

  1. Brent R.

    Brent R. Notebook Evangelist

    Reputations:
    37
    Messages:
    673
    Likes Received:
    148
    Trophy Points:
    56
    I have looked on ebay and amazon and I have bought a few different ones but they are usually really cleapo plastic and break after a few weeks and never really were big enough for this laptop, I have tried one of the wooden ones but they are so heavy and even them aren't really wide enough for my laptop I need something like is like 26in long and 12in wide at least.....I have looks and I can't find a good one so I thought I might ask on here where people have big laptops like me, if this is the wrong area for this I am sorry mods, Thanks

    Brent
     
  2. Meaker@Sager

    Meaker@Sager Company Representative

    Reputations:
    9,436
    Messages:
    58,194
    Likes Received:
    17,909
    Trophy Points:
    931
    You could get on of those folding hospital style ones that have a metal foot under the bed.
     
    PrimeTimeAction likes this.
  3. Brent R.

    Brent R. Notebook Evangelist

    Reputations:
    37
    Messages:
    673
    Likes Received:
    148
    Trophy Points:
    56
    I have drawers under there so there is no space under the bed.
     
  4. Brent R.

    Brent R. Notebook Evangelist

    Reputations:
    37
    Messages:
    673
    Likes Received:
    148
    Trophy Points:
    56
    *double sorry
     
    Last edited: Jul 17, 2016
  5. Meaker@Sager

    Meaker@Sager Company Representative

    Reputations:
    9,436
    Messages:
    58,194
    Likes Received:
    17,909
    Trophy Points:
    931
    You can get them with pretty flat feet but it may be worth doing that due to the extra support you gain from the frame.
     
  6. Support.1@XOTIC PC

    Support.1@XOTIC PC Company Representative

    Reputations:
    203
    Messages:
    4,355
    Likes Received:
    1,099
    Trophy Points:
    231
    Might be worth making one almost. Go to a hardware store, pick up something decent for the top (wood, plastic, or metal of some kind), and see if they can cut it to the appropriate size if needed. It might be possible to find some kind of used furniture and scrap it and take the top? Maybe grab a cushion or foam, and attach it to the bottom, add a little trim to the sides for a lip so nothing slides off. You could add some legs, vent holes, handles, and put a finish on it that yo might like if you wanted to add on to it a bit more.

    But from what I saw from browsing around, I didn't see much either, and some that did kind of match what you mentioned looked fairly cheap...