Hi All,
I am looking to upgrade the video card in my Sager NP5793 from its current 8800M GTX to possibly a NVidia FX 3700M MXM 2.1 HE III if it will work in the 5793. The notebook has the .13 bios and also has the .11 EC/KBC.
The EBAY write-up says it works the same as the GTX 280M which I am not sure is right or not. I leave it to more knowledgable people to tell me about that.
NVidia FX 3700M MXM 2.1 HE III Work as a GTX 280M on eBay!
My main concerns is will it work and is it a step up from the current video card in the notebook.
I do not have the money for a new notebook for at least two years and I want to get the most out of the 5793 as possible. Since I already have a X9000 CPU in it, I can't go any higher CPU-wise as far as I know so my only choices are video and hard drive. I would like to take care of the video card now and wait until they either come up with a larger SSD drive or larger hybrid SATA drive.
Thanks for your advice.
Mike
-
It is a Lenovo FX3700m shown in the pic.
The past tests about 3700m on m570ru-u(5793) I know are based on HP version like below.
nVidia NB9E-GLM3 Quadro FX 3700M 1GB MXM Card | eBay
And you may need a vbios modification to make it stop 30s beeping and run @ 3d clock.
BTW: No need to upgrade from 8800M GTX to FX3700M, you gain little by spending $250 unless your 8800M GTX is dying. -
Thanks for the information. I will skip then on the video upgrade as my 8800 is working fine so far. Plus rep for the information and saving me some money.
All the best,
Mike
Looking to upgrade video card in 5793
Discussion in 'Sager and Clevo' started by mikepd, Aug 12, 2011.