The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    NP8760 Hard Drive Failure?

    Discussion in 'Sager and Clevo' started by equilibrium1736, Dec 8, 2010.

  1. equilibrium1736

    equilibrium1736 Notebook Geek

    Reputations:
    1
    Messages:
    77
    Likes Received:
    0
    Trophy Points:
    15
    Just bought a Agility 2 SSD hard drive and made it the primary OS drive. The Seagate Momentus XT is now the storage drive.

    The problem first started when I saw the seagate disappear from my computer in windows. I then restarted and the computer wouldn't go past the sager logo.

    I turned off the computer, turned it back on again and got a message:

    Intel UNDI PXE 2.1 Build 082
    Realtek PCI Express Gigabit Ethernet Controller Series V2.28 (090508)
    PXE-E61 Media Test Failure, check cable
    PXE-MOF: exiting PXE Rom

    This is really odd, I can boot into windows from the SSD and restart with no problem. It's when I do a cold shut down that the SSD disappears. I usually have to shut down again and then restore the boot order.
     
    equilibrium1736, Dec 8, 2010
    #1
  2. equilibrium1736

    equilibrium1736 Notebook Geek

    Reputations:
    1
    Messages:
    77
    Likes Received:
    0
    Trophy Points:
    15
    Apparently there is a known issue that OCZ has with certain motherboards. This is a warning that the Agility 2 does not work properly with the NP8760. They say their working on a solution but we all know what that means.......
     
    equilibrium1736, Dec 8, 2010
    #2