I just received my Malibal Satori P170EM, I tried installing the nvidia driver and it said that my graphics card was not turned on so I went to device manager and it said error code 10 could not start
-
Nothing.To.Lose Notebook Consultant
-
-
check this out. this is the most recent post date found about this error
Code 10 grahics error - Nvidia - Graphic-Displays
Frag Kings • nvidia geforce 9800 gt code 10 error • Hardware
and here is explanation by nvidia :
Device cannot start Code 10
if you read the first forum the error could be mix of software or hardware error. So , if software issue is not solved then it must be hardware issue -
Nothing.To.Lose Notebook Consultant
10char -
Nothing.To.Lose Notebook Consultant
-
Do you see GTX680M next to VGA when you bring up the BIOS menu? If the BIOS version is 1.00.05 and it shows Empty next to VGA slot, then you might need to resit the card, if it doesn't work, then it may have been "dead on arrival" (hope this is not the case). -
Nothing.To.Lose Notebook Consultant
Malibal helped me, they sent me a working driver.
-
Dude, your card is broken. Send it to me and I'll give you my 7970M + $300 because I'm a nice guy. Whaddyasay?
-
Nvidia 680m error code 10
Discussion in 'Sager and Clevo' started by Nothing.To.Lose, Aug 8, 2012.