P150EM Bios file .bin format

Hi,

I'm desperately looking for a p150em bios in Bin format.
I corruped my bios, no backup, and I'm now trying with an Ez Programmer to re-write the chip.
Unfortunately I only found the bios/ec packages from Stack and Prema version, but not the single bios .bin file.

Would anybody have a bios bin file to share?
Thank you very much for your help!

 

If a bios comes in bin just change the extension to rom and the other way around. The extension doesn't matter in the end

 

Hi, thank you for your hint!
Actually I have in the package several files, with one bigger than the others (6144Ko), and that has no extension.
I just tried to rename it with .bin, so it's recognized by the Programmer. But when I try to write to the chip, I have an alert saying File larger than the chip capacity. If I write anyway, it still doesn't boot.
Here are the files I have on the picture

https://ibb.co/Qmxq7D4

 

You'll have to wait until someone with a programmer can help you. Don't own one or have the skills to help ya

 

The files you find are normally updates, you need a full dump.

 

hello. you want the u25(2mb) or u39(4mb) files?

 

Hi everyone, sorry for the late answer, this time I was out of internet connexion...
Thank you very much for your answers!

@Kostasgreece: I'm not sure about the choice between U25 and U39.
The chip I'm toying with on the motherboard is a 25VF016B, which was just behind the bios battery so I supposed it was the bios chip.
But when I found the Service Manual for Clevo p150em, it shows another chip for bios, MX25L1606EM2I-12G U25
I'm a bit lost now... Impossible to find a MX25L1606EM2I-12G on the motherboard.

I would say then that I need a U25, but it's just a guess.

 

this motherboard has two bios chips. the U39 and U25 are bios chips on your motherboard . if you have a bios programmer and you know to solder and unsolder them, I can help you with the files.

 

I just checked a picture I took of the chip I tested on my motherboard. It's labelled U25!

Picture: https://ibb.co/1rFz6rN

I didn't see the U39 one, I'll see tomorrow when I get back home if I can find it.
The power went out when updating the bios, I don't know if it affects the U25 or U39.

Would the U39 chip be for EC?

I have a programmer (EZP2019+) with a Test Clip to connect to the chip directly on the board, so I don't have to de-solder it.

Do you know where I could find the files?

 

i bought the original files from internet . i have the files and you have to change in both chips. pm me

 

the u39 is to the right side of the hdd slot. the u39 is the bios and u25 the ec

 

Wow thank you for pointing me to the U39! I don't know if would have found it, it's much harder to reach than the U25.
And the big black tape is covering the U39 marking too!

it's this one right?

https://ibb.co/rHDRVKV

https://ibb.co/rQQsxw3

 

Another silly question: how do I send MPs, I can't find feature. Is it disabled for new users of the forum?

 

Yes, need 5 posts and it will tick over.

 

Cool , thank you!

 

Hello guys. I have a question. I got problem with my sager p150em and the gpu drivers. I don't know what to do can anybody help me? I can't get my 7970m to work

 

Please keep the same question to one thread, especially when you created one for it.