The Notebook Review forums were hosted by TechTarget, who shut down them down on January 31, 2022. This static read-only archive was pulled by NBR forum users between January 20 and January 31, 2022, in an effort to make sure that the valuable technical information that had been posted on the forums is preserved. For current discussions, many NBR forum users moved over to NotebookTalk.net after the shutdown.
Problems? See this thread at archive.org.

    P370SM-A (XMG 724) 120hz screen upgrade instructions please

    Discussion in 'Sager and Clevo' started by syceo, Feb 2, 2015.

  1. syceo

    syceo Notebook Enthusiast

    Reputations:
    0
    Messages:
    26
    Likes Received:
    2
    Trophy Points:
    6
    Hi Guys, so I managed to source the correct screen and 50 pin edp cable but cant find any clear instructions on how to fit the screen and cable. i know how to get to the screen in order to swap it out but how do i get to the mainboard to plug the cable in. Would I have to remove the keyboard/keyboard surround completely? and if so does anyone have instructions on how to achieve this. Any help would be appreciated thanks.
     
    syceo, Feb 2, 2015
    #1
  2. kantana

    kantana Notebook Consultant

    Reputations:
    12
    Messages:
    257
    Likes Received:
    16
    Trophy Points:
    31
    I looked at the engineering manuals from tech inferno for the P9377 and couldn't work out how to get to the top. If I was to make assumptions it would be to remove any screws from the bottom of the machine then work around the back to start on the clips since it looks like the top section lifts off and is probably put together with clips around the edges.
    If you manage to get this done pls take photos and document your findings as it's something I may be undertaking in the future, thanks!
     
    kantana, Feb 2, 2015
    #2
  3. clevo-extreme

    clevo-extreme Company Representative

    Reputations:
    72
    Messages:
    773
    Likes Received:
    477
    Trophy Points:
    76
    if you need instruction, here we go
    [​IMG]
     
    clevo-extreme, Feb 2, 2015
    #3
  4. syceo

    syceo Notebook Enthusiast

    Reputations:
    0
    Messages:
    26
    Likes Received:
    2
    Trophy Points:
    6
    Number 13 is the edp cable ? but my question is how do i get to the mainboard to connect it?
     
    syceo, Feb 2, 2015
    #4